Cooper Lighting ADY071464 - Manual
Cooper Lighting ADY071464 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
#10-32 x5/8"
(by others)
(by others)
Set screw(2x)
Wiring holes
Exploded view and part call-out
J-box
End screw
#10-32 x3/8"
(2x)
1/4" fasteners
Canopy
Fixture
head
mount fixtures vertically.
Roundel
3
Installation Instructions
These installation instructions are valid with the above Ametrix styles.
Vault
1
C-Scroll
2
Sheet 1 of 2
Visor and Non-Visor
Warning
that all sources of power are turned off. All
performed by a certified electrician.
: Before starting any work ensure
work must meet local/national codes and be
Do not
Small, INDOOR
P1R
(P
endant
, 1
-way
, R
emote ballast
)
ADY071464 REV B (ECN80481)
#10-32 x3/8"
Set screw
(2x)
1/4" fasteners
additional bracing around J-box to support fixture.
(by others)
1. After securing fixture to ceiling, attach appropriate wires and
Yoke
2. Push wire connections into j-box and cover mounting plate
(4x)
Using appropriate fasteners, secure fixture to ceiling.
Set screw(2x)
ensure all connections are properly matched.
with canopy.
Wiring the fixture
3. Secure canopy using both #10-32x 3/8" set screws.
Aiming the fixture
#10-32 x3/8"
Canopy
fixture.
around J-box to support
Run wires from pendant and j-box through wiring holes in
mounting plate.
Mounting the fixture
4.
Use
1.
Using both #10-32 x5/8" end screws, secure fixture head to
yoke on pendant and run fixture wire through pendant.
2.
Remove both #10-32 x3/8" set screws and allow canopy to
slide down pendant.
3.
Use additional bracing
#10-32 x5/8"
End screw
(x2)
(2x)
screws to secure the position.
Fixture head
degrees. Each subsequent notch is an additional +/- 10-
End screw
#10-32 x5/8"
2. When fixture head is rotated to desired angle, retighten end
degrees
indicator
1. To aim fixture, loosen both #10-32 x5/8" end screws. When
both indicators are lined up, the slope of the lens face is 40-
Yoke arm
indicator
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
