Cooper Lighting ADY071461 - Manual
Cooper Lighting ADY071461 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Replacing fixture head; Installation Instructions; SRR; Replacing brackets on fixture housing
- Page 3 – Wiring the fixture; Securing the fixtures with safety wire
- Page 5 – Lamping Size Chart; FIXTURE SIZE
(drywall)
Removing fixture head from housing
Drywall bracket
(4x)
Pan head screw
#8-32 x3/8"
assembly
Housing
Fixture head
with mounting plate
Visor and Non-Visor
Do not
Warning
: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.
Installation Instructions
Vault
C-Scroll
Roundel
These installation instructions are valid with the above Ametrix styles.
Sheet 1 of 5
Large, INDOOR
SRR
(S
emi-
R
ecessed
, R
emote ballast
)
ADY071461 REV A (ECN070344)
Pan head screws
#10-32 x5/8"
Store fixture in safe place.
1.
Loosen all #10-32 x5/8" Pan head screws in keyhole slots
inside of fixture housing. (16 1/2" & 22 1/2" fixture sizes use
four(4) screws, 30 1/2 fixture sizes use six(6) screws"
2.
Slide fixture head assembly to side and remove from housing.
3.
1.
Semi-recessed fixtures shown without thermal protectors
#8-32
(4x)
Removing brackets from fixture housing
(2x)
Cover plate
Universal bracket
Hex nut
(ceiling grid)
Thermal protector
cover plate
Exploded view and part call-out
(ceiling grid)
Exploded view and part call-out
(drywall)
all four #10-32 Hex nuts.
Pem-stud
Hex nut
#8-32
(4x)
Universal bracket
(2x)
1.
Remove universal brackets from fixture housing by removing
1.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Replacing fixture head (drywall) 1/4-20 x1 1/2"Pan head screw Warning : Before starting any work ensure that all sources of power are turned off. All work must meet local/national codes and be performed by a certified electrician. Do not mount fixtures vertically. Installation Instructions Vault...
Thermal coverplate 1. If applicable, replace ceiling tile with fixture secured back into ceiling. Remove adjacent tile from ceiling to facilitate wiring. 2. Loosen #10-32 x3/8" Pan head screws and remove electrical cover plate and knock out appropriate hole. 3. Using conduit fitting and nut, sec...
Installation Instructions Vault w/ visor C-Scroll w/ visor Roundel w/ visor These installation instructions are valid with the above Ametrix styles Warning : Before starting any work ensure that all sources of power are turned off. All work must meet local/national codes and be performed by a certif...
