Cooper Lighting 0FY599A02 - Manual
Cooper Lighting 0FY599A02 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
335
TRACK
LIGHTING
System
C O O P E R L I G H T I N G
NOTE: Unless otherwise stated, Lazer
connectors are not compatible with Halo
Miniature Power-Trac.
C O N N E C T O R S ( F o r u s e w i t h L a z e r Tr a c k O n l y )
LAZER
™
BY HALO
®
LZR200
Live End Feed with Junction
Box Cover
For starting a track run at beginning of
track and when connector is mounted to
a junction box.
Finishes:
White (P), Black (MB)
LZR201
Live End Feed
For starting a track run at beginning of track.
Finishes:
White (P), Black (MB)
LZR203
Adjustable “L” and Straight
Connector Feed
To connect two track sections at right angles
or straight end-to-end. Includes straight and
right angle covers.
Finishes:
White (P), Black (MB)
LZR205
Conduit Continuation Feed
Includes one left feed and one right feed
to continue a run around obstructions.
Requires 1/2” trade size fitting (not included).
Finishes:
White (P), Black (MB)
LZR208
Cord and Plug Feed
10’ three-wire cord with grounded plug.
Maximum capacity 5 AMPS.
Finishes:
White (P), Black (MB)
LZR212
Mini Connector
For joining two track sections end-to-end.
LZR212 is not an electrical feed.
Finishes:
White (P), Black (MB)
LZR214
X Connector
For joining four track sections in an X pattern.
Can be used as electrical feed point.
Finishes:
White (P), Black (MB)
DE112
Dead End
Replacement Dead end for Lazer Track ( 6
included).
Finishes:
White (P), Black (MB)
LZR202
Floating Canopy and
Connector Feed
Track can be connected to existing outlet
box located anywhere along the track.
Comes with canopy cover, connector,
dead end and mounting hardware.
Finishes:
White (P), Black (MB)
LZR204
Conduit Adapter Feed
Designed to accept 1/2” trade size conduit
fitting (not supplied). Use when feeding
to track through surface conduit system.
Finishes:
White (P), Black (MB)
LZR206
T-Bar Canopy
For installing track on T-Bar ceilings.
LZR201 or LZR203 also required.
Finish:
White (P)
LZR211
Flexible Connector Feed
To connect two track sections at any angle
up to 90° or for connecting wall and ceiling
mounted track. Can be used as electrical
feed point.
Finishes:
White (P), Black (MB)
LZR213R
Right Handed T Connector
LZR213L
Left Handed T Connector
To connect three track sections. Can be used as
electrical feed point.
Finishes:
White (P), Black (MB)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
