Code Alarm CSI-200 - Manual

Code Alarm CSI-200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – NOTE: Chirps must be selected on to access this feature
Page 3 – PROTECTION WHILE THE SYSTEM IS ARMED; second alarm cycle, attracting visual attention to the vehicle.
Page 4 – NOTE: Chirps must be selected on to access this feature.
Page 5 – MANUALLY OVERRIDING YOUR SYSTEM:; Programming Your Custom Override Code:; sequence. Turn the ignition switch to the on position.
Page 6 – Custom Code Programming Example:; beep and the lights will flash one time. LED turns On)
Page 8 – SYSTEM FUNCTIONS AT A GLANCE; DASH LED INDICATORS

Loading the manual

128-

1 of 8

3 Button Remote Security System with
Stage Shock Sensor & Starter Disable

Model CSI-200

Owner’s Manual

FEATURES :

2 Four Button Code Hopping RF Transmitters

Four Channel Code Learning Receiver (capable of accepting 4 transmitters)

Selectable Manual Override Mode

Remote Panic in all modes

Protected Valet

7 Function LED -(Light Emitting Diode) - Arm / Disarm / Zone1, 2, 3 / Valet / Arming

Intrusion Alert with Memory

Audible Arm / Disarm / Defective Zone / Tamper Confirmation

Instant Siren Activation

Low Current Horn Output

Starter Disable

True Last Door Arming (hardwire only)

Defective Zone By - Pass

Hardwire or Voltage Sense Selectable

Active or Passive Arming Selectable

Programmable Auto Lock On / Off

Programmable Auto Unlock, Drivers Door All Doors On / Off

Programmable Door Lock Pulse Duration 1 Second / 3.5 Seconds/1 Sec L/ Dbl. U/L

Programmable Active or Passive Door Locks

User Programmable Permanent Chirp Delete

On Command RF Chirp Delete from Transmitter (Software Selectable)

6 Tone Multi - Tone Siren

Additional Negative Trigger Input

RF Inhibit with ignition on

Parking Light Flasher

Plug In Dual Stage Shock Sensor

OPTIONS :

Remote Trunk Release

Remote Keyless Entry

Illuminated Entry

Multiple Vehicle Capable

Remote Starter

Remote Power Window Roll Up

Remote Garage Door Interface

Two Step Unlock Configurable

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - NOTE: Chirps must be selected on to access this feature

128- 2 of 8 NOTE: Your system has the option of using a siren, the vehicle horn, or both for thesounding device. Where the siren is referenced below, the horn or both may infact chirp, or beep. ARMING THE SYSTEM - ACTIVE1. Turn off the engine, exit the vehicle, and close all doors, hood lid, and tru...

Page 3 - PROTECTION WHILE THE SYSTEM IS ARMED; second alarm cycle, attracting visual attention to the vehicle.

128- 3 of 8 Page 3 PROTECTION WHILE THE SYSTEM IS ARMED ; Opening any protected door, hood, or trunk lid will cause the alarm to immediately sound. The alarm will continue to sound for 30 seconds, then stop and continue tomonitor all protected entry points. If the thief left a door opened, the alarm...

Page 4 - NOTE: Chirps must be selected on to access this feature.

128- 4 of 8 Page 4 button is activated, the drivers door only will unlock, pressing the unlock button asecond time will cause all doors to unlock. 1. As you approach the vehicle, press and hold the unlock button on the keychain transmit- ter for 2 seconds. ; The dash mounted LED turns off. If passiv...