Clifford 6000 - Manual
Clifford 6000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Wiring Description for the 4-Pin Connector; Wiring Description for the 22-Pin Connector; Pin Wire Color
- Page 3 – Passenger Compartment Connections; and testing is complete.
- Page 4 – Passenger Compartment Connections (Continued); the di ode band point ing to ward the switch.; Door Trigger/Parking light; Engine Bay Connections
- Page 5 – Hood Trigger; Final Wiring Connections; Delayed; Remote Control Channel Assignments; Mas ter Re mote Control; Func tion
- Page 6 – Num ber of LED flashes be tween pauses
- Page 7 – must; Certificate of Installation; Programmable Features; bold; Using the CliffNet Wizard Pro; CliffNet Wizard Pro User’s Guide; Programming the User-Selectable Features; To select another feature
- Page 8 – User-Programmable Features; NOT USED; SHOULD ONLY BE PROGRAMMED
- Page 9 – Installer-Programmable Features; chirps indicating that the system is in installer-program mode.; Fea ture; Single/Double Lock Pulse; NOTE 2; be on a single button.; System Checklist & Troubleshooting; In step 1 of the; Important; Starter and Ignition Immobilization
- Page 10 – Starter or Ignition Auto Im mo bi li za tion Cir cuit; door trig ger; NOTE: If the 20A fuse blows upon arm ing:; Cen tral Door Lock ing/Un lock ing
- Page 11 – Parking lights; Only one side flashes.; Only one door locks.; Door Lock ing/Un lock ing
- Page 13 – while
Standard Features of the IntelliGuard 6000
Programmable (+) or (-) require relays.
System Components
The IntelliGuard 6000 installation kit contains the following components:
One Prewired 22-pin connector harness
One Extended Range Receiver
One Prewired 4-pin connector harness
One PlainView 2 Coded Valet Switch
One IntelliGuard 6000 Control Unit
One Insignia Siren
One Hardware Kit
One Prewired LED
One Glass Tampering Sensor
One User’s Manual
One Dual-Zone Piezo Sensor
Two Clifford Window Decals
Two Remote Transmitters
In tel liGuard 6000/898
1
n
Lifetime Warranty
n
His & Hers Remote Controls
n
ACG™ 2 (Anti-CodeGrabbing™)
n
Extended Range Receiver
n
Audible Low Transmitter Battery Warning
n
Built-In Starter or Ignition Immobilizer
n
Optional Wireless Immobilizer™
n
FACT — False Alarm Control and Test
n
Remote Siren Silencing
n
Dual-Zone Piezo Sensor™
n
Glass Tampering Sensor
n
Dual-Mode “Chirp” Silencing
n
Patented UltraSecure Coded Valet Mode™
n
Optional DataPort™ Interface to Your Own PC
n
Point-and-Click Feature Programming
n
Complete System Diagnostics At-A-Glance
n
High-Output Insignia Siren
n
Remote Door Locking/Unlocking*
n
Remote Panic with Smart Locking/Unlocking*
n
Built-In Dual Parking light Flasher with Onboard Relay
n
Remote Controlled Courtesy Lighting Output
n
Remote Keyless Entry and Accessory Activation Even in
Valet Mode
n
Patented Smart AutoTesting™
n
Smart Remote Trunk Release
n
User-Selectable AutoArming
n
AutoArm & Lock with Visual Indication
n
Instant AutoArm Bypass
n
Patented Malfunction AutoBypass™ with
AutoReMonitoring
n
Patented SmartPowerUp™ 2
n
Multiple Vehicle Control with Same Remote
n
Eight-Event TotalRecall™
n
Patented Smart Prior Intrusion Attempt Alert
n
Patented Remote Control Code Learning and
MultiRemote Recognition
n
Clear All Remotes
n
High-Luminescence LED Status Indicator with Automatic
Battery-Saving Mode
n
Full-Time SecureAccess™ Programming
n
Advanced CMOS Microcomputer
n
Pre-Loomed Wiring
n
Accessory Channel with Selectable Output Type
n
Integrated Electronic Timer for Remote Headlight
Activation and Timed Turbo Cooldown
n
Installer-Selectable Door Ajar/Delayed Courtesy Lights
n
Prewired LED, Sensor and PlainView 2 Switch
Connectors
Downloaded from:
http://www.guardianalarms.net
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Wiring Description for the 4-Pin Connector Pin Wire Color Con nects to 1 Green/Blue Ignition Output 2 White/Blue Starter Output 3 White/Brown Ignition Input 4 White/Green Starter Input Wiring Description for the 22-Pin Connector Pin Wire Color Con nects to 1 Gray/Blue Channel 4 output 2 Black Prewir...
Passenger Compartment Connections Control Unit and Extended Range Receiver The IntelliGuard 6000 con trol unit must be in stalled in side the ve hi cle. Un der no cir cum stances should the unit be in stalled un der the hood or other simi larly hos tile en vi ron ment. 1. Select an area behind the d...
Passenger Compartment Connections (Continued) Trunk Trigger Vehicles with a ground-switching trunk light will interface directly with the IntelliGuard 6000 (on positive switching Rolls-Royce vehicles,use a relay to invert polarity). The switch may be located in or near the trunk latch or at the trun...
