Cleveland Steam Oven - Manual
Cleveland Steam Oven – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CAUTION; Read and understand this manual before using this PC-HACCP Kit.; Photo 2; PC–HACCP KIT CONTENTS; Photo 1
- Page 3 – PHOTO 3
- Page 4 – TO CONNECT THE RS232 CONVERTER TO THE PC; Photo 4
- Page 5 – RS232 CABLE CONNECTION FOR CONVERTER TO RS485 ONLY; Photo 8 shows the cable connections for the PC Converter.; Photo 8
- Page 7 – Remove the Control Side Cover; From the bottom edge of the side panel, push up and pull out.
- Page 8 – Remove the Control Panel; Remove the Control Panel and place it on a work surface as shown.
- Page 9 – Attaching the Base Plate to the Communication Module
- Page 11 – Inserting the Communication Module Cable into the Oven; Remove the sanitary seal plug from the underside of the Combi.
- Page 12 – Connect the Network Cable to the Communication Module; : Attach the wire to the Converter at connection “A” and attach the; USB; Ground
- Page 13 – Setting the Jumpers on the Communication Module; Jumper setting for the first Combi and all Combis in the Network.
- Page 15 – Replace the Operation Panel; Remount the Operation Panel back into the Combi.
- Page 16 – Replace the Control Side Panel; Photo; Push up and in from the bottom edge of the side panel.
- Page 17 – Directions for Installing the USB Adapter; the back of your computer.
- Page 28 – Switches 1 and 4 are ON
- Page 30 – Cleveland Range, LLC; Revision Index Page; REV; REVISION HISTORY; DATE BY; ERB
260AZH REV. B 3/06
This kit connects a PC to as many as 31 Combis at a maximum distance of 3280 Feet (1000 meters). The
software can download cooking programs, record HACCP information, and monitor the networked
Combis in real-time. This installation manual includes instructions for both RS232 and USB connections
for a PC. Choose the connection that works best for your application and follow the instructions that
apply. If any parts are missing from any kits, please contact Cleveland Range Service at 216-481-4900.
RS232 Correct connection of a PC to Combis using the Communication Module with RS232 Port.
FOR RS232 connection use part number: CPC-HACCP-MU232
Correct connection of a PC to Combis using the Communication Module with USB Port
.
FOR USB connection use part number: CPC-HACCP-MUUSB
CAUTION
Turn off all power to Combis before installation of PC-HACCP Network.
Follow all Safety and Operating Instructions
Failure to do so can result in injury, and equipment and property damage
.
PC-Control / HACCP Network Installation
For Convotherm by Cleveland Combination Oven Steamers
1333 East 179
th
Street
Cleveland, Ohio 44110
Phone: (216) 481-4900
Fax: (216) 481 3782
www.clevelandrange.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 1 Software-CD - 300550 2 Network Connection Cable – 300551 (included only w/ 232 kit) 3 Dongle - C5009210 4 PC Interface Converter - C5009156 (included only w/ 232 kit) 5 9 Volt Power Supply for Converter – 300548 (included only w/ 232 kit) 6 Operating Instructions – 260AZV 1 4 2 3 5 CAUTION Read ...
3 1 Electronic Board (1) – C5019104 2 Connector (1) – C5002091 3 Bracket with Studs (1) – C2114799 4 Control Panel Spacers (2) – C8009030 5 Screws – M3 (2) - 111633 6 Lock Washers (2) – C8016001 7 Hexagon Nuts – M3 (4) – C8004012 PHOTO 3 RS485 Communication Module p/n C-RS485 1 4,7 2 3 5, 6, 7 5, 6,...
4 TO CONNECT THE RS232 CONVERTER TO THE PC Photos 4, 5, and 6 show the correct cable connections from the PC to the PC Converter for RS232. Note the position of the Dongle on the PC in Photo 5. Make sure the PC Converter is connected to the 9-volt DC power supply as shown in Photo 7. Photo 4 Photo 5...
