ClearOne AccuMic II - Manual
ClearOne AccuMic II – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents; Product Registration; Technical Services; ii; Introduction; AccuMic II Installation and Operation Manual
- Page 3 – Connecting the AccuMic II; Sales and Customer Service; Unpacking; Figure 2. Video codec compatibility with AccuMic II; Figure 1. AccuMic II system contents
- Page 4 – To connect to a video codec; to the television’s Audio In jack.; Installation; To connect a second AccuMic II; Reconnect the first AccuMic II to its electrical power source.; Figure 3. AccuMic II connections; accommodate meeting participants.
- Page 5 – Using the AccuMic II; If problems persist, please contact our Technical Services Group.; Operation
- Page 6 – Compliance; FCC Part 15 Compliance; EC Declaration of Conformity; Manufacturer’s Address:; THIS WARRANTY IS VOID IF:; Warranty
AccuMic II™ Microphone
Installation & Operation Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Table of Contents The AccuMic II™ is a highly-advanced microphone designed specifically for use with small to medium-size video conferencing systems, including the ClearOne V-There. It features three unidirectional microphone elements positioned to pick up sound in a 360-degree pattern. Each mic ele...
Introduction Installation Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 3 2 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Connecting the AccuMic II The AccuMic II easily connects to most video codecs at the line level audio input and output, as shown in the tabl...
Installation Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 To connect to a video codec 1. Connect the 10-pin end of the mini-DIN cable to the 10-pin connector on the AccuMic II (see Figure 3). 2. Connect the Speaker Ref In plug (white) to the video codec’s Audio Out jack. 3. Conne...
