ClearOne 800-157-001 - Manuals

AccuMic Microphone — Introduction 3 Product overview Microphone pad A. LEDs . Indicates when the microphones are activated. B. Mute button . Mutes or unmutes the microphones. AccuMic VC cable A. Speaker Reference In . This plug provides an echo cancellation reference for the AccuMic, ensuring audio ...

AccuMic Microphone — AccuMic PC 4 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Connecting the AccuMic PC The AccuMic PC provides the highest quality audio to any desktop webconferencing system.Featuring Distributed Echo Cancellation, automated gain control, gating control and ada...

AccuMic Microphone — AccuMic PC 5 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 To connect the AccuMic PC 1. Connect the 10-pin plug to the 10-pin connector on the AccuMic PC. 2. Connect the Speaker Ref In (green) to the Line Out connector on the PC soundcard. 3. Connect the Mic O...

AccuMic Microphone — AccuMic PC 6 Configuring volume control settings To ensure audio is heard clearly on both ends, you must configure the Volume Control settings on your computer. You need to mute the near-end microphone balance to preventlocal audio feedback. (Note: This does not mute the AccuMic...

AccuMic Microphone — AccuMic PC 7 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 To mute near-end microphone balance Note :You must mute the microphone balance to prevent local audio from looping back through your loudspeakers and causing feedback problems. 1. Open Volume Control p...

AccuMic Microphone — AccuMic PC 8 To select and adjust far-end microphone balance Note : You must select Microphone in the Recording Control window to ensure audio is being sent to the far end. 1. Open Volume Control panel. 2. On the Options menu, click Properties . 3. In the Properties window, clic...

9 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 AccuMic Microphone — AccuMic VC Connecting the AccuMic VC The AccuMic VC easily connects to most video codecs at the line level audio input and output. Please refer to the table in the appendix for a list of video codecs that are com...

10 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 AccuMic Microphone — AccuMic VC To connect an AccuMic VC Extension Mic Note : Do not connect an AccuMic VC extension to an AccuMic PC. The AccuMic VC is not compatible with the AccuMic PC and will not work properly. 1. Disconnect th...

11 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Troubleshooting If you have trouble with your AccuMic, the unit might not be properly connected or other equipment might be malfunctioning. To begin, check the following: • The AccuMic power supply is plugged into a 100-240-volt ele...

12 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 AccuMic Microphone — Appendix Specifications Dimensions (L x W x H) 8" x 6.5" x 1"(20.3 x 16.5 x 2.5 cm) Weight 1 lb (.45 kg) Operation Temperature: 41–104° F(5–40° C) Humidity: 50–80% Storage Temperature: 41–158° F(5–70...

13 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 AccuMic Microphone — Appendix Video codec compatibility AccuMic VC only Figure 17. Video codec compatibility with AccuMic VC

14 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 AccuMic Microphone — Appendix Warranty ClearOne Communications, Inc. (Manufacturer) warrants that this product is free of defects in bothmaterials and workmanship. For full warranty information and coverage, refer to the ClearOne we...

16 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 AccuMic Microphone — Appendix FCC Part 15 Compliance This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonab...