Clarion APX201.2 - Manual
Clarion APX201.2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Channel Power System Amplifier; TABLE OF CONTENTS; Save your original sales receipt as proof of purchase.
- Page 3 – DESCRIPTION
- Page 4 – Gain Control; - This allows you to set the nominal operating level of the; Bass Boost Control; - The crossover frequency is fully; Crossover Frequency Multiplier Switch; - This switch is equipped with a 12dB per octave; Input Mode Switch; - This switch allows you to set the input mode. Stereo; Speaker Level Inputs; - These provide connections for a high-level stereo
- Page 5 – Owner’s Manual; CONNECTIONS FOR POWER AND SPEAKERS
- Page 6 – APPLICATIONS; Figure 3; Set X-Over Mode to LP and adjust
- Page 7 – Figure 4; In this application, the amplifier is used in stereo and drives two
- Page 8 – Mixed-Mode Satellite and Subwoofer System; Set X-Over Mode to OFF; The amplifier can be configured for a mixed-mode operation. The
- Page 9 – INSTALLATION
- Page 10 – Never ground the speakers to the vehicle chassis or body.
- Page 11 – Electrical connections for the APX201.2 or the APX401.2
- Page 12 – SETTING THE GAIN
- Page 13 – Audio cycles on and off.
- Page 14 – Whining or ticking noise in the audio with engine on.
- Page 15 – PRODUCT SPECS
- Page 16 – WARRANTY INFORMATION
O P E R A T IO N
I N S T A L L A T I O N
M A N U A L
2-CHANNEL POWER AMPLIFIER
apx201.qxd 12/5/01 12:57 PM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Clarion
- Model
- APX201.2
- Document type
- Manual
- Language(s)
- English
- Pages
- 16
- File size
- 532.4 KB
- Format
Summary
2 Channel Power System Amplifier 2 TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Input Connections and Audio Controls . . . . . . . . . . . . . . 3Connections for ...
Owner’s Manual 3 Owner’s Manual DESCRIPTION The APX201.2 and APX401.2 use an unregulated MOSFET power supply forsuperior control of output wattage. A toroid-coil transformer yields maximumpower transfer with minimal heat loss. Extensive attention to circuit designkeeps AM RFI at low levels, so you w...
2 Channel Power System Amplifier 4 • Gain Control - This allows you to set the nominal operating level of the amplifier. The amplifier’s range, 250mV to 2.5V for RCA inputs or 500mV to5V for speaker level inputs, can accommodate input levels from virtually anybrand of source unit. • Bass Boost Contr...
