Cisco SD2008 - Manual
Cisco SD2008 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Quick Start Guide
Cisco Small Business
Model SD2008
8-Port 10/100/1000 Gigabit Switch
Package Contents
•
SD2008 Gigabit Switch
•
Power Adapter
•
Quick Start Guide
Product Overview
Thank you for choosing the Cisco 8-Port 10/100/1000 Gigabit Switch. The
Switch provides non-blocking, wire speed switching for your 10, 100, and 1000
Mbps network clients.
Front Panel
The Port Status and System Status LEDs are located on the front panel of the
Switch.
System—(Green) This LED lights up and remains lit when the Switch is
powered on.
Ports 1-8—(Green) Each LED lights up when a connection is made through its
corresponding port. It flashes when the corresponding port is active.
Back Panel
The Ethernet network ports are located on the back panel of the Switch. All
ports are auto-negotiating and have automatic MDI/MDI-X crossover detection.
1-8—These ports connect the Switch to network devices, such as computers.
1
Side Panel
The power port and security slot are located on the side panels of the Switch.
The power port is where you will connect the power adapter.
The security slot is where you can attach a lock to protect the Switch from theft.
Placement Options
Set the Switch on its four rubber feet, or mount the Switch on a wall.
The Switch offers two wall-mount slots, which are the two crisscross slots on
the bottom panel. The measurement between the two slots is 2.52 inches
(64 mm).
To use the wall-mount option, follow these instructions:
S
TEP
1
Attach two screws to the wall, 2.52 inches (64 mm) apart , so that the
Switch’s wall-mount slots can line up with the two screws.
S
TEP
2
Maneuver the Switch to insert the screws into the two slots.
Typical Installation Scenario
The application diagram shown here is an example of a typical network
configuration.
When you connect your network devices, make sure you don’t exceed the
maximum cabling distances, which are listed in the following table:
N
OTE
Use Categor y 5e Ethernet network cables for your Gigabit
connections.
From
To
Maximum Distance
Switch
Switch
100 meters (328 feet)
Switch
Computer
100 meters (328 feet)
2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
