Cisco 880 Series - Manual
Cisco 880 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installing Main Memory; Installation Procedure; Item
- Page 5 – Installing Power Over Ethernet
- Page 8 – Opening the Chassis
- Page 10 – Closing the Chassis
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installing Memory and Power Over Ethernet in
Cisco 880 Series Integrated Services Routers
Warning
Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Statement 1
This document describes how to install memory and Power over Ethernet (PoE) in a Cisco 880 Series
Integrated Services Router (ISR). It contains the following sections:
•
•
•
Installing Power Over Ethernet
•
•
Note
Memory and PoE are the only upgradable options in the Cisco 880 Series ISR. Do not remove or install
any other internal module.
Safety Warnings
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Installing Memory and Power Over Ethernet in Cisco 880 Series Integrated Services Routers OL-16194-01 Installing Main Memory Warning Read the installation instructions before connecting the system to the power source. Statement 1004 Warning Before working on equipment that is connected to power li...
5 Installing Memory and Power Over Ethernet in Cisco 880 Series Integrated Services Routers OL-16194-01 Installing Power Over Ethernet Installing Power Over Ethernet This section contains the following information: • Items Shipped • Installation Procedure Items Shipped The PoE option for the Cisco 8...
8 Installing Memory and Power Over Ethernet in Cisco 880 Series Integrated Services Routers OL-16194-01 Opening the Chassis Tip If the card is not installed in the correct direction, the three screw holes will not match up with the three metal standoffs. Step 5 Place the PoE card on top of the three...
