Cisco 7915 - Manual

6 Using an External Power Supply Read the following warnings before you use the Cisco certified external power supply with the Expansion Module 7915: Caution Only use the specified Cisco-approved power supply on this product. Warning This product relies on the building's installation for short-circu...

7 To install the Cisco Unified IP Phone Expansion Module 7915, perform the following tasks. 1. Remove the Footstand from the Cisco Unified IP Phone. 2. Connect the Support Bar to the Cisco Unified IP Phone. 3. Connect the Expansion Module 7915 to the Support Bar. 4. Connect the Interface Cable. 5. C...

11 Step 3 Insert the hooks into the slots and then rotate the top of the Cisco Unified IP Phone Expansion Module 7915 into the support bar so that it rests flush with the bar. Step 4 Tighten the thumbscrew on the back of the Cisco Unified IP Phone Expansion Module 7915. Note If you are installing tw...

12 Step 3 Plug one end of the second interface cable into the AUX jack with the “out” icon underneath on the first Expansion Module (the one closest to the phone). Step 4 Plug the other end of the second interface cable into the AUX jack with the “in” icon underneath on the second Expansion Module (...

14 Connect the Footstand Step 1 Locate the three hooks on the footstand. Step 2 Position the hooks so that they align with the open slots on the support bar. Note There are four positions in each of the three sets of open slots on the support bar. This lets you choose the angle of the footstand. Ste...

15 Figure 7 Connecting a Laptop Cable Lock 140967 140967 Step 1 Detach the cable lock door from the support bar. Step 2 Secure the security cable to a desktop. Step 3 Insert the laptop cable lock into the security slot on the back of the phone, lock it, and remove the key. Start Up Sequence After th...

17 4 Using the Cisco Unified IP Phone Expansion Module 7915 The Expansion Module 7915 functions as a line appearance or programmable button module, allowing you to keep track of calls in progress, calls on hold, and calls requiring transfer, or to access phone services. Most call functions, such as ...

18 Note If the Expansion Module 7915 buttons are configured as phone features, they can be performed from the Expansion Module. Refer to the phone guide for your Cisco Unified IP Phone for instructions about using your phone. The following is a typical scenario when using the Cisco Unified IP Phone ...

19 Configuring the Buttons on Your Cisco Unified IP Phone Expansion Module 7915 Similar to your Cisco Unified IP Phone, you can configure speed dial numbers or program buttons to access phone services on the Cisco Unified IP Phone Expansion Module 7915. Before you can do this, ask your system admini...

21 6 Technical Specifications for the Cisco Unified IP Phone Expansion Module 7915 This section provides the physical and operating environment specifications for the Cisco Unified IP Phone Expansion Module 7915, as well as the regulatory compliance information. Physical and Operating Environment Sp...

22 7 Where to Find More Information The following sections provide sources for obtaining additional documentation from Cisco Systems. Related Documentation The following documents provide additional information. • Administration guide for your Cisco Unified IP Phone—Provides instructions for the sys...

23 Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. 9 Cisco One-Year Limited Hardwar...