Cisco 3660 - Manual
Cisco 3660 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Installing the Cable Management Bracket; Cable Management Bracket to Cisco 3660 Chassis; Attach the cable management bracket to the chassis as shown in
- Page 4 – Cable Management Bracket on the Cisco 3660 Chassis; Installing the Ground Lug
- Page 5 – Warning; Regulatory Compliance and Safety Information; document that; Crimping the Lug Around the Wire
- Page 6 – Ground Lug Fastened to Cisco 3660 Chassis; Making Network Connections; Note; online and on the documentation CD-ROM that you received with; Reinstall network cables and turn ON power to the router.; NEBS/ETSI Intrabuilding Lightning Requirement; Ground lug
- Page 7 – Regulatory Compliance and Safety; document that accompanied this device.; Installing the Alarm Terminal Block; The alarm port on the Cisco 3660 rear panel (see; Alarm Port on the Cisco 3660 Router; The terminals are described in; Alarm port; Alarm Terminal Block Connections; Terminal; NC
- Page 8 – Follow this procedure to install the alarm terminal block (see; Figure 4-10 Alarm Terminal Block; Figure 4-11 Connecting the Alarm Terminal Block to the Alarm Port; Reinstall network cables, and turn ON power to the router.
C H A P T E R
4-1
NEBS Level 3 and ETSI Compliance Kit Installation Guide for Cisco 3620, Cisco 3640, and Cisco 3660 Routers
78-5450-06 B0
4
Installation on Cisco 3660 Routers
This chapter describes how to install a NEBS Level 3/ETSI kit on your Cisco 3660 router and contains
the following sections:
•
Attaching the 23-Inch Rack-Mounting Brackets, page 4-1
•
Installing the Ground Lug, page 4-4
•
Making Network Connections, page 4-6
•
Installing the Alarm Terminal Block, page 4-7
Note
If you have yet to install your Cisco 3600 series router, see the publication
Cisco 3600 Series
Hardware Installation Guide
.
You can access this document
online and on the documentation CD-ROM that you received with
your router
at:
Cisco Product Documentation > Access Servers and Access Routers > Modular
Access Routers > Cisco 3600 Series Routers > Hardware installation documents for Cisco 3600
series
Attaching the 23-Inch Rack-Mounting Brackets
The NEBS kit for Cisco 3660 routers comes with rack-mount brackets for installing the Cisco 3600
series routers in 23-inch or 24-inch racks.
Attach the mounting brackets to the chassis as shown in
, or
, using the
screws provided. Attach the second bracket to the opposite side of the chassis.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4-3 NEBS Level 3 and ETSI Compliance Kit Installation Guide for Cisco 3620, Cisco 3640, and Cisco 3660 Routers 78-5450-06 B0 Chapter 4 Installation on Cisco 3660 Routers Installing the Cable Management Bracket Figure 4-3 23-Inch Bracket Attachment to Cisco 3660 Chassis—Center-Mount, Rear Panel Forwa...
4-4 NEBS Level 3 and ETSI Compliance Kit Installation Guide for Cisco 3620, Cisco 3640, and Cisco 3660 Routers 78-5450-06 B0 Chapter 4 Installation on Cisco 3660 Routers Installing the Ground Lug Figure 4-5 Cable Management Bracket on the Cisco 3660 Chassis Figure 4-6 Wrapping Cables to the Manageme...
4-5 NEBS Level 3 and ETSI Compliance Kit Installation Guide for Cisco 3620, Cisco 3640, and Cisco 3660 Routers 78-5450-06 B0 Chapter 4 Installation on Cisco 3660 Routers Installing the Ground Lug Warning Before performing any of the following procedures, ensure that power is removed from the DC circ...
