Cisco 3600 - Manual
Cisco 3600 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Restrictions; Cisco IOS Dial Services Configuration Guide:Terminal Services; Supported Platforms; The following platforms are supported:
- Page 3 – Configuration Tasks; show modem; commands
- Page 4 – Command Reference
- Page 5 – There are no default behaviors or values for this command.; group; This command was introduced.
- Page 6 – Table 1; Field
- Page 7 – show
- Page 8 – Note; slot
- Page 9 – The type of display output generated from the
- Page 10 – Table 2
- Page 11 – clear modem
- Page 12 – Related Commands
- Page 13 – show modem log; show modem log
- Page 14 – Displays information about MICA digital modems.
- Page 15 – show modem configuration
- Page 17 – show modem connect-speeds; Table 3
- Page 18 – the last time the access servers or router was power cycled or the; command was; clear modem counters; command at the beginning of the month and issue the; command at the end of the month.; Examples; show modem connect-speeds 1200
- Page 21 – Table 4
- Page 22 – show modem operational-status; Cisco AS5800 series access servers; show modem operational-status
- Page 24 – Glossary; —Global System for Communications; Command
1
Cisco IOS Release 12.1(5)T
V.110 Support for Cisco 3600 Series Digital
Modems
This feature implements the V.110 protocol on Cisco digital modem network modules (NM-6DM,
NM-12DM, NM-18DM, NM-24DM, and NM-30DM) for the Cisco 3600 series of routers, and provides
V.110 support for digital modems connected over BRI or PRI interfaces.
This document contains the following sections:
•
•
•
Supported Standards, MIBs, and RFCs, page 2
•
•
Feature Overview
V.110 is a real-time method of encapsulating varying data rates and the associated RS-232 signals into
a 64-Kbps ISDN B-channel. Using this procedure, asynchronous data rates from 600 bps to 38.4 Kpbs
can be transparently rate-adapted over a single 64-Kbps channel.
V.110 is useful for transporting data over GSM-type mobile phones. V.110 over ISDN support is being
added to the MARS platform to support digital modems in many countries which use E1 with ISDN.
V.110, as an alternative to V.120, is a method of ISDN rate adaption. It provides DTEs with V-series
type interfaces with access to ISDN networks by bit stuffing. Many V.110 devices are used in Europe
and Japan.
Benefits
The V.110 recommendation of the ITU-T rate adapts a low-speed connection to an ISDN B-channel,
allowing the remote station or terminal adapter to use the fast call-setup times offered by ISDN. This
feature enables Global System for Communications (GSM) wireless connectivity.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
V.110 Support for Cisco 3600 Series Digital Modems Supported Platforms 2 Cisco IOS Release 12.1(5)T Restrictions • The BRI interface with V.110 is not supported by the Cisco 3620 router. • Cisco 3600 series routers require Low Layer Compatability (LLC) information from the Telco switch. Related Docu...
V.110 Support for Cisco 3600 Series Digital Modems Configuration Tasks 3 Cisco IOS Release 12.1(5)T Configuration Tasks There are no configuration tasks. All commands in this feature are existing show modem commands with modified display output. Note Cisco 3600 series routers require Low Layer Compa...
V.110 Support for Cisco 3600 Series Digital Modems Command Reference 4 Cisco IOS Release 12.1(5)T Command Reference No new commands were added for this feature. However, the output for the following commands was modified to include V.110 information. All other commands used with this feature are doc...
