Chromalox RAD-2063BX35 - Manual
Chromalox RAD-2063BX35 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; Reflector Spacer Sheets —; Figure 1 — Heater Parts and Dimensions
- Page 3 – SERIES CONNECTION; of Radiant Heaters of equal volt; DELTA CONNECTIONS –; When heaters occur in multiples; WIRING; Figure 6
- Page 5 – RENEWAL PARTS IDENTIFICATION; PARTS COMMON TO ALL HEATERS
- Page 6 – Screws —
DIVISION
4
SECTION
RAD
SALES
REFERENCE
DATE
SERVICE REFERENCE
Installation, Operation
and
RENEWAL PARTS IDENTIFICATION
161-048215-001
APRIL, 2005
Chromalox
PG404-10
(Supersedes PG404-9)
© 2010 Chromalox, Inc.
Volts
kW
Model
Overall
Heated
RAD-2063BX35
120
0.4
13-5/8
7-3/4
RAD-2063BX29
120
.65
20
14-1/8
RAD-2083B
120 or 240
0.8
24-3/8
16-1/2
RAD-2083BV
208 or 275
0.8
RAD-3113B
120 or 240
1.1
30-5/8
22-3/4
RAD-3113BV
208 or 275
1.1
RAD-3133BV
208 or 275
1.3
35-7/8
28-5/16
RAD-3133B
240 or 480
1.3
RAD-4183BV
208 or 275
1.8
46-5/8
38-1/2
RAD-4183B
240 or 480
1.8
RAD-5213BV
208 or 275
2.15
53-7/8
45-7/16
RAD-5213B
240 or 480
2.15
RAD-5253BV
208 or 275
2.5
61-3/8
53-3/8
RAD-5253B
240 or 480
2.5
RAD-6273BV
208 or 275
2.7
65-7/8
58-1/4
RAD-6273B
240 or 480
2.7
RAD-6303BV
208 or 275
3.0
73-3/4
65-3/4
RAD-6303B
240 or 480
3.0
RAD-7333BV
208 or 275
3.35
79-7/8
72-1/4
RAD-7333B
240 or 480
3.35
RAD-7363BV
208 or 275
3.6
85-3/4
78
RAD-7363B
240 or 480
3.6
RAD-8453BV
208 or 275
4.5
106
97-1/2
RAD-8453B
240 or 480
4.5
Specifications Table –
The Safety Alert Symbol is used to indicate a
risk of personal injury
Familiarize yourself with these instructions before attempting
to install or operate this Radiant Heater.
The system designer is responsible for the safety
of this equipment and should install adequate
back-up controls and safety devices with their
electric heating equipment. Where the conse-
quences of failure could result in personal injury or
property damage, back-up controls are essential.
Before Installing
1.
Open carton and remove heater at the place of installation.
Mounting clamps are in parts bag in carton.
2.
Check nameplate volt and watt rating against your power sup-
ply voltage and heating requirements of your installation. This
nameplate is located on one end of the heater.
Length (In.)
Type RAD (Style 3B) Electric Radiant Heaters
!
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INSTALLATION ELECTRIC SHOCK HAZARD. Disconnect all powerbefore installing or servicing heater. Failure to doso could result in personal injury or property dam-age. Heater must be installed or serviced by a qual-ified person in accordance with the NationalElectrical Code, NFPA 70. 1. These radiant he...
ELECTRIC SHOCK HAZARD. Disconnect all powerbefore installing or servicing heater. Failure to do socould result in personal injury or property damage.Heater must be installed by a qualified person in accor-dance with the National Electrical Code, NFPA 70. ELECTRIC SHOCK HAZARD. Any installation invol...
RENEWAL PARTS IDENTIFICATION Volts kW Element Reflector Insulation Element Model Model Sheet Bushing Support Clip RAD-2063BX35 120 400 RTU-2063AX35 234-013411-031 ————— ————— RAD-2063B 120 600 RTU-2063A-120V 234-013411-011 ————— ————— RAD-2063B 240 600 RTU-2063A-240V 234-013411-011 ————— ————— RAD-2...
