Page 2 - Contents
1 Contents 1. SAFETY PRECAUTIONS.................................................................................. 2 2. INTRODUCTION ............................................................................................... 3 3. FEATURES ............................................................
Page 3 - SAFETY PRECAUTIONS; product, to prevent any possible danger.
2 1. SAFETY PRECAUTIONS CAUTION RISK OF ELECTR IC SH OCK. DO NO T O PEN! C AU T I O N : C AU T I O N : TO R ED UC E THE R ISK O F ELEC TRICA L SHO CK , DO NOT O PEN COVERS (OR BACK). NO USER SERV IC EA BLE PARTS INSIDE. REFER SERV ICIN G TO QU ALIFIED SERV ICE PERSON NEL. WARNING: Alert the user to ...
Page 6 - or
5 4. PACKING LIST Check and make sure all the items shown below are included in your product package. If something is missing, contact your dealer as soon as possible. Dome (IR Type) User Manual Power Adaptor Accessories 6106 or Outdoor IR Dome Indoor IR Dome 6128
Page 7 - NAME and FUNCTION of EACH PART
6 5. NAME and FUNCTION of EACH PART 5.1 OSD Button (Menu): No. Name Function 1 UP Digital Zoom-Out or Up direction button 2 DOWN Digital Zoom-In or Down direction button 3 RIGHT Increase Value ( + + ) 4 LEFT Decrease Value ( -- ) 5 ENTER Enter or Exit setup MENU To adjust the OSD, remove the dome c ...
Page 8 - Removing the Dome Cover; cover counter-clockwise to unlock and pull free from the main body.; Camera Image Adjustment; Pan Base moves by 360° on the whole.
7 6. INSTALLATION 6.1 Camera Installation & Operation 1. Removing the Dome Cover Remove the indoor dome cover from the main body by gently turning the cover counter-clockwise to unlock and pull free from the main body. Remove the outdoor dome cover using the provided L-Wrench, loosen the screws ...
Page 9 - lever to obtain the best image view.
8 Note : This product is not suitable for horizontal 360° continuous rotation. 3. Adjusting the Vari-Focal Lens z lever to obtain the best image view. Loosen the Focus lever counter-clockwise several turns, and then rotate the Focus lever to obtain the optimum picture quality. Re-tighten the Zoom le...
Page 10 - Attaching the Dome Cover; clockwise until it locks into place
9 4. Attaching the Dome Cover After all the necessary adjustments have been made, reinstall the dome cover to the main body. z Reinstall the indoor dome cover and the main body by turning the dome clockwise until it locks into place To prevent any damage or theft, lock-up the dome by using the count...
Page 11 - Connect to Monitor
10 6.2 Connect to Monitor Connect the Video-out port of the camera to a monitor. Since the connecting method varies depending on the instrument, refer to the manual supplied with the instrument for more information.
Page 12 - Connect the Power; cables to prevent external damage.
11 6.3 Connect the Power Connect the indoor dome video output to a 75 Ohms type coaxial cable and the DC-Jack or AC/ DC-Terminator to the power source. z z Connect the outdoor dome video output to a 75 Ohms type coaxial cable and the DC-Jack or AC/ DC-Terminato r to the power source. When using cond...
Page 13 - Note; Connection Layout
12 Note : Power adapter is sold separately. 6.4 Connection Layout To connect the keyboard and alarm, please follow the setup guide shown below:
Page 14 - PELCO Keyboard (or compatible) Installation; Communication
13 6.4.1 Connecting the Keyboard PELCO Keyboard (or compatible) Installation The RS-422 interface is used for communicati ng with a PELCO keyboard. Refer to Fig. 1; connect R+ of the camera to T+ of the PELCO keyboard. Connect R- of the camera to T- of the PELCO keyboard. The user can adjust Camera ...
Page 15 - Alarm Installation; Connect GND and AL of the camera to the GND and AL of the alarm.; : The alarm is triggered by motion detection.
14 Fig.1 6.4.2 Connecting the Alarm Alarm Installation Connect GND and AL of the camera to the GND and AL of the alarm. Note : The alarm is triggered by motion detection.
Page 17 - Under normal display (before entering the OSD menu), use; Main Menu Display; ON; Main Menu Setup; Use
16 8. SYSTEM SETUP 8.1 Digital Zoom Operation: Under normal display (before entering the OSD menu), use S (T)/ T (W) button to control the digital zoom (zoom range: 1 x ~ 16 x). 8.2 OSD (On Screen Display) Main Menu Display MAIN MENU V.9729 LENS TYPE EXPOSURE WHITE BALANCE PRIVACY MASK EFFECT NOISE ...
Page 18 - Sub Menu Description; EXPOSURE
17 8.3 Sub Menu Description 8.3.1 LENS TYPE Built-in DC-type Vari-Focal lens with ICR (although the camera OSD supports both DC-type and Manual-type lenses, it is fixed to DC type because the camera is built-in only with a DC-type Vari-Focal lens). 8.3.2 EXPOSURE Setup EXPOSURE MODE AGC MAX SHUTTER ...
Page 19 - BLC EXPOSURE; AREA; NORMAL EXPOSURE
18 [BLCUSER] Setup: BLC EXPOSURE AREA START X END X START Y END Y LEVEL DEFAULT RETURN CENTER NA NA NA NA 7 ON (1) AREA : Setup to BLC, the area is se t as BLC area and under manual mode (1) CENTER (2) TOPS (3) TOPL (4) BOTTOMS (5) BOTTOML (6) LEFT (7) RIGHT (Default Setup: NA). (2) START X: Horizon...
Page 20 - WHITE BALANCE; When WB MODE is set to PUSH AUTO:
19 2. AGC MAX: Set AGC MODE to AUTO, AGC MAX setup range = 0~255. 3. SHUTTER SPEED consists of 9 types of modes: AUTO, NORMAL, FLICKERLESS (NTSC: 1/60 and PAL: 1/50), 1/250, 1/1000, 1/2000, 1/4000, 1/10000, 1/20000, 1/50000 and 1/100000 (Default Setup: NORMAL). 4. DSS MAX: Low speed shutter control,...
Page 21 - PRIVACY MASK; privacy mask becomes ineffective.
20 8.3.5 PRIVACY MASK Setup: PRIVACY MASK AREA MASK START X END X START Y END Y DEFAULT RETURN 1 OFF 20 70 20 30 ON s t 1. AREA: Maximum PRIVACY MASK area setting is 15 (Default Setup: 1). 2. MASK: Set MASK to “ON”, MASK AREA becomes available for setup and is shown on the monitor (Default Setup: OF...
Page 23 - LANGUAGE: Select English/ Chinese as your OSD language display.
22 (2) Four TITLE Setup Positions (TITLE/ ID/ ZOOM): RIGHT DOWN/ LEFT UP/ RIGHT UP/ LEFT DOWN (Default Setup: RIGHT DOWN). (3) Four ID Setup Positions: RIGHT DOWN/ LEFT UP/ RIGHT UP / LEFT DOWN (Default Setup: RIGHT DOWN). (4) Four ZOOM Setup Positions: RIGHT DOWN/ LEFT UP/ RIGHT UP/ LEFT DOWN (Defa...
Page 24 - NOISE REDUCTION; Adjust three-dimension noise reduction level values: HIG; MOTION DETECT; OFF; DETECTION AREA Setup:
23 8.3.7 NOISE REDUCTION Setup: NOISE REDUCTION NOISE REDUCE REDUCE LEVEL DEFAULT RETURN ON MEDIUM ON s t 1. Enable/Disable 2D/3D Digital Noise Reduction function (Default Setup: ON). 2. Adjust three-dimension noise reduction level values: HIG H/ MEDIUM/ LOW. The higher the level, the better the noi...
Page 25 - COMMUNICATION
24 Detection Block Setup: Press MENU button to enable or disable a single cell configuration setting Use up and down keys to move around or to end the setting mode. Press MENU button for 3 seconds to leave the setting page. Keyboard Operation: Use the joystick to move the direction up, down, left or...
