Channel Vision DVR-16N - Manuals

FEATURES Chapter 1 Features Operation Playback, recording, backup and transmission simultaneously Real time single or multi-screen display Pan & Tilt, 2X/4X digital zoom and PIP display Easy operation by Jog shuttle, IR remote controller, external keypad controller and USB 2.0 Mouse Hidden camer...

FEATURES Audio 4 channels audio recording in real time Copy USB 2.0 external HDD USB 2.0 memory stick CD-RW/ DVD-RW (option) General Software downloading facility via network and USB memory stick Auto detection of PAL / NTSC Built-in hardware Watchdog Automatic time adjustment through Network VGA ou...

PACKING DETAIL Chapter 2 Packing Detail 4. Remote controller 3. User’s Manual 1. DVR 2. Network Viewer Program CD 5. R-HDD Rack Key (option) 7. Battery 6. Power Cord 1. DVR 2. Network Viewer Program CD 3. User’s Manual 4. Remote Controller 5. R-HDD Rack Key(option) 6. Power Cord 7. Batteries CONTENT...

LOCATION AND CONTROL Chapter 3 Location and Control 3.1 FRONT PANEL CONTROLS 1 SPOT / ESC Button to control spot monitor/ return to the previous menu 2 FUNCTION Using this button when you select “USER” in Relay 4 3 AUTO / F / ( - ) Button to begin the auto sequence mode/ decrease the value/ focus in...

LOCATION AND CONTROL 3.2 REAR PANEL CONNECTORS Port Name Description 1 CAMERA IN BNC input ports for cameras 2 AUDIO IN RCA input ports for an audio signal(4CH Line input) 3 AUDIO OUT RCA output port for an audio signal 4 TERM ON / OFF Switch to use the terminal block connectors of RS-422 or RS-485 ...

INSTALLATION Chapter 4 Installation 4.1 TOTAL CONNECTION LAY-OUT 9

INSTALLATION 4.2 INDIVIDUAL CONNECTION 4.2.1 Camera * Connect a female BNC connector of each camera to a male BNC connector, “CAMERA IN” port. * Connect the looping BNC output to other inputs as required. 10

INSTALLATION 4.2.2 Audio (*Refer to the specification) Audio Input - AUDIO IN : Connect the RCA Line Jack of the relevant equipment (for example, a camera with a built-in microphone) to the AUDIO IN port. Audio Output - AUDIO OUT : Connect the RCA Line output to a monitor with a built-in speaker. NO...

INSTALLATION 4.2.3 Monitor - Connect the female BNC for monitor output. EO monitor output. .2.4 Power - Auto-detect the correct voltage of power (110~240 VAC) - Connect the male Y/C cable socket for S-VID 4 - Connect the power cord. AC110~240V 50 / 60Hz TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK D...

INSTALLATION 4.2.5 USB 2.0 ports ○ 1 Three USB ports are provided to connect a USB memory stick, external storage devices and CD-RW/DVD-RW for video clip copying. One USB port is on the front panel and the other two are on the rear panel. ○ 2 A USB mouse can be connected to one of the ports. You can...

OPERATION Chapter 5 Operation 5.1 FACTORY DEFAULT MENU Setup> QUICK SETUP> QUICK SETUP…………………………..………OFF IMAGE SIZE………………………………………720x240 RECORD FRAME…………………………………60 EVENT……………………….…..…………...........ALL PRE RECORD TIME……….……………………..5 sec POST RECORD TIME………………………..…..10 sec IMAGE QUALITY.. ………...

OPERATION 5.2 FRONT PANEL CONTROLS 5.2.1 POWER ON/ OFF SWITCH(located in rear panel) After the connection of power cord and other devices(HDDS) with this DVR, turn the power on. a. The video signal system (NTSC or PAL) is automatically detected. b. Power Failure Recovery This DVR automatically rever...

OPERATION Use the +10 Button when you select two digit camera numbers. EX) Camera Number 12 = Press the +10 Button , and then press the No. 2 Button . CAMERA/NUMBER INPUT buttons are used to input the password in the password lock function. 5.2.2.2 Auto Sequence Display <ADD AUTO SINGLE : ON> ...

OPERATION 5.2.3 RECORD Press the REC button and the following message will be displayed as below; MANUAL MODE Press the REC button to begin recording. To stop recording, press the REC button again. The screen will be turned into real time display mode. SCHEDULE MODE When Schedule mode is selected, t...

- OPERATION 5.2.4.1 CALENDAR SEARCH At the SEARCH menu; ① Move the cursor to CALENDAR SEARCH using © or ª button. ② Press the ENTER button and CALENDAR SEARCH screen appears. ③ Select the desired HDD ID using the (-) or (+) button. ④ Move the cursor to CHANNEL using the © or ª button and select the ...

- OPERATION Press the ENTER button, and the list searched appears. When the list appears on the screen, select the desired list using © or ª buttons or wheel scroll <H e Bookmark list> huttle ring. l picture of the desired image. ARK list. t the SEARCH menu; E SEARCH using © or ª button. tton ...

- OPERATION 5.2.5 SEARCH BUTTON INFORMATION .1.5.1 SLOW ( ) e speed level which is slower than normal speed (X1) and displayed it at ack speed will be changed in the order of the below seven times slower than normal playback speed d .2 PLAY / PAUSE ( ) ormal speed (X1). How to playback a section rep...

- OPERATION .2.6 JOG SHUTTLE INFORMATION .2.6.1 Normal Playback Mode esired playback direction and speed level according to the above ② mode when the SHUTTLE ring is returned to the center position. Frame by Frame Playback Mode image while the DVR is in the playback mode. .2.6.3 Digital Zoom of PTZ ...

- OPERATION 5.2.7 DIGITAL ZOOM Press the desired camera number button you wish to display on the monitor. red location. .2.8 SCREEN SELECT(LV/PB) uring the playback, press the LV/PB button to convert the screen into real time display mode. .2.9 SPOT MONITOR Set up the desired mode in “SPOT” of “SCRE...

- OPERATION ** Please refer to 6.2.7 SPOT of SCREEN .2 Press the COPY button to copy the recorded images into other media and the COPY MENU screen .2.10.1 COPY .2.10.1-1 COPY TO EXTERNAL HDD (USB) At the COPY menu, o COPY using the © or ª buttons. ears. 5 .10 COPY appears. 5 5 ① Move the cursor t ② ...

OPERATION 5.2.13 FUNCTION BUTTON <Audio select > You can select audio channels regardless of monitoring screen. Press the “function(audio select)” button and then press the desired number button and you can hear audio of selected channel regardless of monitoring screen. < Link of audio and ...

- - 35 OPERATION 5.3 REMOTE CONTROLLER Button Name Description ○ 1 FUNCTION Refer to 5.2.13 FUNCTION BUTTON ○ 2 Z- Zoom out of PTZ ○ 3 IRIS - Iris close of PTZ ○ 4 COPY Display the copy menu ○ 5 RECORD ( ● ) Begin and stop recording ○ 6 ALARM RESET Release the event signal ○ 7 PLAY / PAUSE( ) Press ...

- MENU SETUP You n c on the M ○ 1 Status d of th * You n c on the M ○ 1 Status d of th 5.4 MOUSE CONTROL * ca ca lick the below keys lick the below keys ENU screen with a mo ENU screen with a mouse. use. isplay Doubl isplay Double-click e-click e left button e left button ○ 3 Menu dis lick of the r ...

- MENU SETUP Ch tup NTRANCE OF THE MENU SETUP ress the MENU button for the desired DVR setting. 6.1 QUICK SE This menu is simply used when user want to change just a few important settings. Note: If you select QUICK SETUP setting is “ON” ， the DVR System will according to this Setup Page setting to ...

- MENU SETUP 6.1. oll of mouse to use the QUICK SETUP .1.2 elect the desired IMAGE SIZE for recording using the (-), (+) buttons or wheel scroll of mouse. 6.1.3 ll of mouse. ** Please refer to chapter 6.3 RECORD. 6.1.4 EVENT Select a kind of EVENT using the (-), (+) buttons or wheel scroll of mouse....

- MENU SETUP ② Change the value of the HORIZONTAL mouse to adjust the horizontal position of the screen. POSITION using the (-), (+) buttons or wheel scroll of to +4 and the default is “0”. heel scroll of mouse . t Move the cursor to the AUTO SEQUENCE using © or ª buttons. Press the ENTER button whe...

- MENU SETUP 6.2.3 DISPLAY At ② ③ To exit this DISPLAY menu, press the ESC button. 6.2.3.1 HDD FREE SPACE At the DISPLAY menu, ① Move the cursor using the © or ª buttons to select the HDD FREE SPACE. ② Use the (-), (+) buttons or wheel scroll of mouse to choose “ON” or “OFF”. * The default is “ON”. ...

- 46 MENU SETUP 6.2.7 SPOT At the SCREEN menu, ① Move the cursor to the SPOT using © or ª buttons. ② Press the ENTER button when the cursor is on the SPOT and the following screen appears. T . Use the (-), (+) buttons or wheel scroll of mouse to select the SPOT MODE. he channel of spot monitor. l wi...

- MENU SETUP ② Press the ENTER button when the cursor is on the RECORD PROGRAM and the following screen appears. Use the © , ª ③ , § , ¨ buttons to move the cursor to the desired item. ④ Select the desired RECORD TYPE using the (-), (+) buttons or wheel scroll of mouse. - SINGLE : Only one event cha...

MENU SETUP < PROGRAM DEFAULT> These are 10 kinds of program and you can change the program setting. 6.3 ENTER button when the cursor is on the IMAGE QUALITY and the following screen ③ Select the desired RECORD QUALITY using the (-), (+) buttons or wheel scroll of mouse. ④ And you can see the s...

MENU SETUP 6 AU E At the RECORD menu, ① e the cur r to th UDIO ECORD using th © , ª buttons. ② s the ENTER button when the cursor is on AUDIO RECORD and the followi rs. (-), (+) buttons or wheel scroll of 6.3.5 REPEAT RECORD At the RECORD menu, ① Move the cursor to the REPEAT RECORD using , ª button...

MENU SETUP ③ Use the (-), (+) buttons or wheel scroll of mouse to set “ON” or “OFF”. ursor to ”REPEAT RECORD ALARM” using © , ª buttons and then select the desired To exit this REPEAT RECORD menu, press the ESC button. 6.3.6 PLAY buttons. ) buttons or wheel scroll of mouse. ② .3.8 HOLIDAY ② It is po...

53 MENU SETUP ③ Set up “ON” or “OFF” of HOLIDAY RECORD using the (-), (+) buttons or wheel scroll of mouse. (+) buttons or wheel ⑤ t up the EVENT menu, Press the ENTER button when the cursor is on the EVENT icon and the following items appear. ETECTION © , ª buttons. N DETECTION and the following ④ ...

- MENU SETUP .6.5.4 PASSWO 6 RD , ª buttons to input the account password to be ② Select the character using the © , ª , § , ¨ buttons and then press the ENTER button. To exit this CHARACTER TABLE screen, press the ESC button. put the e-mail address ned. en appears. buttons and then press the ENTER ...

EXTERNAL TERMINAL INFORMATION Ch 5 7.2 T.ADJ This function is not supported. apter 7 External Terminal Information 7.1 RS-422/48 This port can be used to connect the external controller. 74

EXTERNAL TERMINAL INFORMATION output by relay. 16C CH fo CH for alarm 1 to alarm 4 7.3 RELAY OUT For controlling alarm RS-422/485 / T-ADJ / RELAY OUT 10 9 11 13 12 16 15 14 1920 18 17 NO. RS-422/485 / T-ADJ / RELAY OUT NO 1 CM 1 NC 1 NO 2 CM 2 NC 2 CM 3 CM 4 NC 4 NO 4 NC 3 NO 3 POWER / HDD ERROR MOT...

EXTERNAL TERMINAL INFORMATION This DVR is compatible with TFT LCD monitor in PAL mode. s DVR lution & 70Hz refreshed rate in NTSC/PAL mode. 7.6 SERIAL his DVR is compatible with TFT LCD monitor in PAL mode. (Reserved function, only to technical personnel for debug use.) No DESCRIPTION 7.5 VGA T ...

- EXTERNAL TERMINAL INFORMATION 7 ption): USB1 = USB_REAR1 7.8 REMOTE eserved Function /C : Not Connected No DESCRIPTION .7 Ethernet / USB For both 10Base-T and 100 Base-TX. Note: Definition (under Menu o USB2 = USB_REAR2 1 N/C (Not Connected) 2 N/C (Not Connected) 3 RX-(Receive Data-) 4 N/C (Not Co...

SPECIFICATIONS Cha pecifications pter 8 S 1. VIDEO Input Level 1.0 Vp-p±10% Composite, 75 Ω Balanced Video Standard NTSC(525 lines)/ PAL(625 lines)/ AUTO NTSC 240/120 (16/ 8/ 4CH Real Time) 480/ Display Speed PAL 200/100 fps (16/ 8/ 4CH Real Time) 400/ NTSC 720(H) X 480(V) Display Resolution PAL 720...

- SPECIFICATION Remote Reserved Serial External control (RS-232C) / For debugging : 9 pins male DSUB PTZ control RS-485 Alarm Input 16/ 8/4CH Alarm Output 4 Relay output : 3 pins terminal block (Normal-Open, Normal-Close, Common) x 4 Ethernet RJ45 connector, 10/100 Mbps 7. ELECTRICAL Power Source 11...

- SPECIFICATION < Recording Speed T 16-CH DVR able > Unit : fps Model 8-CH DVR 4-CH DVR 360 x 240 120 120 120 720 x 240 60 60 60 NTSC 720 x 480 30 30 30 360 x 288 100 100 100 720 x 288 50 50 50 RS PAL 720 x 576 25 25 ecording peed 25 Compression Method MPEG4 G4 MPEG4 MPE < ording Ti 1. RECO...

HDD INSTALLATION PROCESS 8 STALL the INTE NAL HARD DRIVE(s). er or slave of HDD before fixing the HD into DVR. Refer to HDD jumper settin ation.) t up no. 1 and 3 by m ster and no. 2 an I SLOT DD INSTALLATION PROCESS 8 STALL the INTE NAL HARD DRIVE(s). er or slave of HDD before fixing the HD into DV...

- NETWORK VIEWER INSTALLATION Chap 9 TA T NETWO VIEWER FTWARE 9.1.1 Syste qu - Pentium III or above recommended - dows 2000 / XP 128MB RAM or above recommended Super VGA 16M or above recommended 10/100 base T network card for LAN operation .1.2 Network Environment ter 9 Network Viewer .1 INS LLA ION...

- NETWORK VIEWER INSTALLATION 9 ○○ 2 Fill out Type, DVR Name, IP address and Password to add the desired units into the DVR in 9.2.2 ○ 1 In case of any changes, type new information into the box after selecting the de the list. ○ 2 Click the “Cha e” bu 9.2.3 D ○ 1 Select t the list. 9.2.4 CONNECT to...

- NETWORK VIEWER INSTALLATION 9.3 his menu allows you to detect all the units on the local network. 1 Click “Search DVR” button to display the “Search” menu window. ○ 2 Click the “Search” bu he twork will be detected and listed ○ 3 unit “Ad dd the unit into the “DVR list”. .4 HDD SEARCH onnect DVR’s...

NETWORK VIEWER INSTALLATION 9.5 FILE SEARCH At the above main menu controller, ○ 1 Click the “File Search” button and the “File list” window will appear on the PC screen. ○ 2 If you want to search images saved in CD-RW, DVD-RW or PC, insert the CD or DVD into your PC and click the “File Search” butt...

NETWORK VIEWER INSTALLATION 9.8 CONTROL 9.8.1 Screen Display ages can be viewed in a full or multi format on each screen. . Full screen display Click the desired channel button and the full screen of the channel will be displayed. ○ 2 . Auto Sequence display Click the “AUTO” button to view the full ...

- NETWORK VIEWER INSTALLATION 9.8.3 PTZ his menu allows you to control the PTZ camera through the network. Click the “PTZ” button to display the following PTZ controller. Click t and button to tilt up or down. Click t and button to pan left or right. Click the “ZOOM( - or +)” button to zoom in or ou...

90 NETWORK VIEWER INSTALLATION After connecting the view screen, And the preview window will be displayed as the above picture. sired option and then click the Print button of the preview window. sired image. e control window after setting the desired HDD and the time. The copying percentage (%) is ...

NETWORK VIEWER INSTALLATION 9.8.12 BLOCK SEARCH You can search and playback the images by the block. After connecting the view screen, ol menu bar to display the Block Search ○ 1 Click the “BLOCK” button on the contr window. . ○ 4 Click the “Play” button of Block Search window to ○ 5 Click the “Next...

NETWORK VIEWER INSTALLATION 9.9 KEY INFORMATION ○ 1 Click this button to pause the images during the playback or live. 9.9.2 PLAY (Reverse & Forward) ○ 1 Use these buttons to playback images at normal speed in either direction. rward) ○ 1 s faster than normal speed in either direction. the rever...