Chamberlain RDO800 - Manual

Chamberlain RDO800

Chamberlain RDO800 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
Page: / 24

Table of Contents:

  • Page 2 – Start by Reading These Important Safety Instructions; Tools Required; door
  • Page 3 – Install stop bracket collar; The stop bracket collar should be installed on the; opposite; weight bar
  • Page 4 – Prepare Opener
  • Page 5 – Installation steps
  • Page 6 – If it is necessary to cut the rope, heat seal the cut end; Release cable; Operating the Manual Release; To disengage the opener
  • Page 7 – Program your Opener & Remote; Delete all Remote Control Codes; Setting the Limits; Check that the opener is engaged.; or; Manual Limit setting
  • Page 8 – The; The opener will automatically detect the protector
  • Page 9 – Accessories
  • Page 10 – Troubleshooting; The garage door opens and closes by itself:; a trained door systems technician.
  • Page 11 – OPERATION OF YOUR OPENER; The green start button; Opening the Door Manually:; The Opener Light Will Turn On:; MAINTENANCE OF YOUR OPENER
  • Page 12 – GARAGE DOOR OPENER WARRANTY; The warranty is strictly limited to the reparation or; D e c l a r a t i o n o f C o n f o r m i t y
Loading the manual

Installation an

d

operating instr

u

ctions for

rolling

d

oor opener Mo

d

el RDO800-series

Chamberlain GmbH
Alfred-Nobel-Strasse 4
66793 Saarwellingen
Germany
TEL: +49 (0) 6838/907-250
FAX: +49 (0) 6838/907-179
www.liftmaster.com

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Start by Reading These Important Safety Instructions; Tools Required; door

1 The Protector System must be used for allinstallations where the closing force as measuredon the bottom of the door is over 400N (40kgf). Excessive force will interfere with the proper operationof the Safety Reverse System or damage the garagedoor. After installation, ensure that the parts of the ...

Page 3 - Install stop bracket collar; The stop bracket collar should be installed on the; opposite; weight bar

2 Door Requirements 3 Ensure that there is at least 45mm from the edge of the curtain to the edge of the bracket. If the roller door drums are onthe edge of the curtain or are of small diameter additional clearance maybe required. If the drums are more than 60mm from the curtain edge or of small dia...

Page 4 - Prepare Opener

3 Prepare Opener 5 For left hand side installations the wire jumper should be removed . Place the Opener in Manual Release mode. Pull the release cord down and across to engage theball into the cup. The drive forks should now be able to be movedmanually. NOTE: To re-engage the opener, pull the relea...

Other Chamberlain Models