Casablanca 38546Z - Manual
Casablanca 38546Z – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Calculation of 32°; card inserted in the; MINIMUM; SLOPED CEILING INSTALLATIONS
- Page 3 – ir; Prepare for fan installation as follows:; COUPLING; iMPortaNt safety iNforMatioN!; BEFORE STARTING THE INSTALLATION OF YOUR CEILING FAN,; GETTING STARTED
- Page 4 – On sloped ceilings, align the; Proceed with installation as follows:; hand; CANOPy INSTALLATION
- Page 5 – TOP COVER; INSTALLING THE FAN BODy TOP COVER
- Page 6 – CANOPy; • GREEN leads from mounting plate; PIN; CANOPy HATCH INSTALLATION
- Page 7 – When installing the halogen bulb,; INSTALLING THE GLASS SHADE
- Page 8 – To avoid possible electrical shock, make cer-; W-85 CONTROL INSTALLATION
- Page 9 – CONTINUED
- Page 10 – INSTALLING THE W-85 WALL CONTROL; If you have multiple Inteli-Touch 3 fans, refer to the section; Wall Control; fans with DOWNLIGHTS ONLY.; SINGLE W-85 INSTALLATION
- Page 11 – DUAL W-85 INSTALLATION; fans within your home you may need to reset the dip switches on; DIP SWITCHES
- Page 12 – OPERATION REVERSING AIRFLOW; To reverse the airflow:; LIGHT; To vary the light brightness at each touch level:; To vary the light brightness:; Release the button when the desired brightness level is reached.; OPERATION LIGHTS; Light Operation
- Page 13 – CHANGING FREQUENCY SETTING; NOTE: All fans leave the factory set to; DIP; AUTOMATIC DEMONSTRATION PROGRAM; To enter the demonstration program:; NOTE: DO NOT set dip switch setting in the remote
- Page 14 – ) To operate the lights for Light Minder Program – Press the
- Page 15 – PROGRAM
- Page 16 – TROUBLESHOOTING TIPS; the blades are balanced.
- Page 17 – PRODUCT SPECIFICATIONS; Bel Air
1
CIRCUIT BREAKER
(Trip breaker for The
circuiT you will be
working on)
FUSE BOX
(remove fuse for The
circuiT you will be
working on)
18”
84”
70”
• The blades in each pack are matched for equal
weight to assure smooth fan operation. If more
than one fan is being installed, be careful not to
mix blades from different cartons.
• Inspect the contents of your carton for possible
shipping or handling damage and report any such
damage directly to your authorized Casablanca
dealer.
• It is always a good idea to have an assistant to help
with the installation.
• When cleaning, painting, or working near your fan,
be very careful of the fan and blades. Always turn
the power OFF to the ceiling fan before servicing
it, working on it, or replacing light bulbs.
• Never insert anything into the path of the fan blades
while the fan is in operation.
• Never install a fan over a pool or spa.
• Never operate a fan that has been damaged in any
way. Contact Casablanca Fan Company by calling
1-888-227-2178, or contact your local authorized
Casablanca dealer for assistance in obtaining
service.
CONTENTS
READ AND SAVE THESE INSTRUCTIONS
Safety and the proper operation of your Casablanca fan both require a thorough knowledge of the product and
proper installation; therefore, before attempting to install and operate your Casablanca fan, read this owner’s
manual completely and carefully. Retain this manual for future reference.
SAFETY FIRST
PN
3843Z
HN
0
9
0
9
CAUTION: To avoid possible electrical shock, make certain that electricity is turned off at the
circuit breaker or fuse box before attempting any installation procedure.
• CAUTION: RISK OF ELECTRICAL SHOCK! All wiring must be performed in accordance with national and local electrical codes. If
you are unfamiliar with the wiring codes, you should use a qualified electrician. To avoid overheating and possible damage to other
equipment, do not install control to a receptacle, fluorescent light fixture, motor operated appliance, or transformer-supplied appli-
ance..
• This fan is designed to be installed on an existing electrical outlet box. The outlet box must be UL Listed for ceiling fan installations, if
it is not, a new box must be installed. Casablanca extension poles are available for sloped or high ceiling installations.
• This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. The maximum current require-
ment for the fan with light fixture is 3.8 amps. The fan uses about 1 amp or 100 watts. Maximum light current is
1
.0
amps or
1
00
watts
of lighting.
• Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the canopy hatch, make sure all wires
are within the canopy and that no wires are being pinched.
For best performance and for your warranty to be valid, use only genuine
Casablanca blades, light fixtures, and accessories.
BEFORE YOU START
SAFE USE
INTRODUCTION
1
MOUNTING RECOMMENDATIONS
2
FAN INSTALLATION
3
CONTROL FEATURES:
INTELI•TOUCH
3
OPERATION
8
16
INTELI•TOUCH
3
TROUB
L
ESHOOTING
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Calculation of 32° Use the tear-off Ceiling Angle Template card inserted in the back of this manual, it provides you with a simple ‘go’ or ‘no-go’ for installing your fan on a sloped ceiling. 7 ′ MINIMUM Pole Length Standard Standard 6” 12” 12” 18” 24” 36” 48” Ceiling Height 8’ 8’ 6” 9’ 9’ 6” 10” ...
3 B el A ir ® Unpacking: Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them against the parts listed here. Before discarding packaging material, be certain that all parts have been removed. CROSSBAR MOUNTING BRACKET WIRE NUT (4) Installing a ...
4 CAUTION: To reduce the risk of personal injury, use only the mounting hardware provided with the approved outlet box to install the crossbar mount- ing bracket. CEILING WIRING CROSSBAR MOUNTING BRACKET FLAT WASHER GREEN GROUND WIRE CEILING FAN APPROVED OUTLET BOX RIDGE SIDE DOWN CANOPy LOCk WASHER...
