Casablanca 59510 - Manuals - manualsarea.com

Page 2 - What to Expect with Your Installation; qualified electrician.; Read and Save These Instructions; WARNINGS; CAUTIONS; Standard Downrod; for ceilings 8-10 feet high; Shorter Downrod; for ceilings 10 feet or higher

www.CasablancaFanCo.com 1.888.227.2178 www.CasablancaFanCo.com 1.888.227.2178 www.CasablancaFanCo.com 1.888.227.2178 What to Expect with Your Installation Know your wiring If you are unfamiliar with wiring, use a qualified electrician. You may need a friend to help you. Check box to see fan weight A...

Page 3 - Tools Needed; Ladder

www.CasablancaFanCo.com 1.888.227.2178 3 M6006-01 • 02/12/16 • © Casablanca Fan Company Tools Needed Ladder Power Drill (optional) 9/64” Drill Bit (optional) Screwdrivers Pliers Wire Strippers If mounting to a support structure, you will also need these tools.

Page 4 - TU; Mounting Options; Use Standard Mounting; or; Use Angled Mounting; to hang the fan from a; OPTION; OPTION; SLIDE; PLACE; FOLD

www.CasablancaFanCo.com 1.888.227.2178 4 M6006-01 • 02/12/16 • © Casablanca Fan Company If you have an angled ceiling: 1. You will need a longer downrod (sold separately) . 2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately) . Guide Touches BOTH ...

Page 5 - Ceiling Bracket; OFF; Make sure all four bumpers are; If you are unable to do this,; Turn P

www.CasablancaFanCo.com 1.888.227.2178 1.888.227.2178 www.CasablancaFanCo.com Ceiling Bracket OFF Make sure all four bumpers are still attached. For angled ceilings, point opening toward peak. Refer to warning w.1 on pg. 2 To avoid possible electrical shock, before installing your fan, disconnect th...

Page 6 - Preparation; DISCA; Remove the shipping blocks from the; needed for blade iron installation.; Some fans will have a shipping

www.CasablancaFanCo.com 1.888.227.2178 Ceiling Bracket (continued) Preparation DISCA RD KEEP! 1.888.227.2178 www.CasablancaFanCo.com Remove the shipping blocks from the motor. Save the screws. They will be needed for blade iron installation. Note: Some fans will have a shipping ring instead of shipp...

Page 7 - Downrod; Slid; for angled; Option 1; skip to next page; If you need a different downrod length follow these steps:; Steps 1-5 to remove standard downrod pipe; Steps 6-10 to reassemble with new; pipe

www.CasablancaFanCo.com 1.888.227.2178 Downrod Slid e Slid e 1 2 3 4 5 6 7 8 9 10 Sold S epar at ely Included Longer Downrod for angled ceilings or ceilings 10’ or higher Shorter Downrod for fans installed close to ceiling Standard Downrod for ceilings 8-10’ high Option 1 Option 2 Option 3 skip to n...

Page 8 - setscrew so that the downrod

www.CasablancaFanCo.com 1.888.227.2178 KEEP! 8” 3/8” CU T & ST R IP (not to scale) Remove the pre-installed setscrew so that the downrod can be inserted. Hand tighten the downrod (at least 4-5 full turns) until it stops. The wires can be cut, but leave at least 8” extending from the top of the d...

Page 9 - DO NOT PICK THE FAN UP BY THE; Place the downrod

www.CasablancaFanCo.com 1.888.227.2178 9 M6006-01 • 02/12/16 • © Casablanca Fan Company Downrod (continued) DO NOT PICK THE FAN UP BY THE CANOPY OR WIRES. Place the downrod ball into the slot in the ceiling bracket. Put the wires and downrod through the canopy. Let the canopy sit loosely on top of t...

Page 10 - Wiring; To connect the wires,; Using orange wire

www.CasablancaFanCo.com 1.888.227.2178 Wiring F RO M CE IL ING BR A CK E T F RO M CEI LING F R OM CEI L I NG F RO M F A N Gr een/Y ellow Stripe (grounding) Gr een/Y ellow Stripe Green/Yellow Stripe Note: To connect the wires, hold the bare metal leads together and place a wire connector over them, t...

Page 11 - Canopy; Lift the canopy into place so that; Screw; Insert the two canopy screws

www.CasablancaFanCo.com 1.888.227.2178 11 M6006-01 • 02/12/16 • © Casablanca Fan Company Canopy Note: Fan style may vary. Lift the canopy into place so that the screw holes are aligned. Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown. Screw Hole...

Page 12 - Blades; blades, then secure each blade to a blade iron.

www.CasablancaFanCo.com 1.888.227.2178 M6006-01 • 02/12/16 • © Casablanca Fan Company Blades 12 Insert blade screws and washers found in the hardware bag into the holes in the blades, then secure each blade to a blade iron. Remember the screws that you kept after removing the shipping blocks (page 6...

Page 13 - Switch Housing; mounting plate. It does not matter which

www.CasablancaFanCo.com 1.888.227.2178 Switch Housing Screw two housing assembly screws from the hardware bag halfway into the mounting plate. It does not matter which two screw holes you choose. Feed the optional light kit wires through the center hole of the upper switch housing, then wrap keyhole...

Page 14 - Lift the lower switch housing up until the

www.CasablancaFanCo.com 1.888.227.2178 Switch Housing (continued) Make sure the lower switch housing is securely attached to the upper switch housing. Failure to properly secure all 3 assembly screws could result in the switch housing fixture falling. CONGRATULATIONS! YOU’RE DONE! Lift the lower swi...

Page 15 - Remote Control; Battery; Battery; ON

www.CasablancaFanCo.com 1.888.227.2178 M6006-01 • 02/12/16 • © Casablanca Fan Company 15 Remote Control Remove battery door. Change the dip switch settings if the frequency matches a previously installed remote transmitter. Install A23 or MN21 alkaline battery in the proper polarity and replace the ...

Page 16 - Light

www.CasablancaFanCo.com 1.888.227.2178 Operation, Maintenance & Cleaning For cleaning the fan, use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes. To select fan speed press one of the numbers on the Fan Speed Dial. To calibrate the fan speed, run the fan ...

Page 17 - Troubleshooting; Fan doesn’t work; AUTHORIZED SERVICE CENTERS; For the most updated listing of Casablanca Authorized; Excessive wobbling

www.CasablancaFanCo.com 1.888.227.2178 17 M6006-01 • 02/12/16 • © Casablanca Fan Company Troubleshooting Fan doesn’t work • Make sure the wall switch is on. • Press a fan speed button (1-6). • Check the circuit breaker to ensure the power is turned on. • Check the transmitter battery. • Make sure th...