Carson SA-500-16 14V - Manual
Carson SA-500-16 14V – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – AMPLIFIER INPUT POWER:; pounds; NOTICE
- Page 3 – emergency equipment.
- Page 4 – - The auxiliary input normally activates the Horn
- Page 5 – CONNECT IONS AT REAR OF UNIT WITH; ELECTRICAL CONNECTIONS; - The diagram shows the; Auxiliary Input Connection; - The Cutout Input turns off any siren
- Page 6 – OPERATION; Sound
- Page 8 – PARTS; Item Part
TB0355A
Page 1 of 8
09/27/05
Carson Manufacturing Co., Inc.
5451 North Rural Street
Indianapolis, IN 46220
Phone: (888) 577-6877 Fax: (317) 254-2667
www.carsonsirens.com
TECHNICAL BULLETIN
YELP
WAIL
STBY
RADIO
HORN
PA
VOLUME
MAN/PHSR
O
F
F
O
N
SA-500
RAD
INSTALLATION AND
OPERATING MANUAL
SA-500-16 14V
SPECIAL PROGRAMMED WITH YELP OVERRIDE
ON THE MAN/PHSR BUTTON
Carson is a trademark of Carson Manufacturing Company, Inc.
Sound
Hazard
- Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TB0355A Page 2 of 8 09/27/05 SA-500-16 SPECIFICATIONS AMPLIFIER INPUT POWER: 9-16 Volts DC, 8 Amps DC per 100W Speaker SIREN MODE OUTPUT POWER: 15 VDC input, 100W speaker(s) One speaker – 105 Watts RMS Two speakers - 180 Watts RMS AUDIO MODE OUTPUT POWER: 14 VDC input, 100W speaker(s) One speaker – ...
TB0355A Page 3 of 8 09/27/05 INSTALLATION Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties. SAFETY P...
TB0355A Page 4 of 8 09/27/05 Cut to Disable horn OPT ION JUMPERS FUSE T- T AUX I PHSR CUT P AUX P INSTALLER-SELECTABLE OPTIONS Carefully cutting programming resistor jumpers or traces on the printed circuit board inside the case can select various options. The cover must be removed to access the jum...
