Carson SA-400-93 PG - Manual
Carson SA-400-93 PG – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – NOTICE
- Page 3 – emergency equipment.
- Page 4 – Wire Size and Termination; power relay may be used.; Optional Auxiliary Input Connection (White); WIRING HARNESS
- Page 5 – OPERATION; Sound; The; OVERRIDE FUNCTIONS
TB0325B
Page 1 of 7
10/18/03
Carson Manufacturing Co., Inc.
5451 North Rural Street
Indianapolis, IN 46220
Phone: (888) 577-6877 Fax: (317) 254-2667
www.carsonsirens.com
TECHNICAL BULLETIN
RADIO
HORN
MAN
WAIL
YELP
PHASER
SIREN
PA
VOL
SA400
OFF
ON
INSTALLATION AND
OPERATING MANUAL
SA-400-93 14V
SA-400-93 28V
SA-400-93 PG (Positive GND)
Carson is a trademark of Carson Manufacturing Company, Inc.
Sound
Hazard
- Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TB0325B Page 2 of 7 10/18/03 SA-400-93 SPECIFICATIONS INPUT POWER: 11-16 Volts DC, 8 Amps DC per Speaker (SA-400-93 14,PG) 22-32 Volts DC, 4 Amps DC per Speaker (SA-400-93 28) SIREN MODE OUTPUT POWER: 15 VDC input, 100W speaker(s) (SA-400-93 14,PG) 30 VDC input, 100W speaker(s) (SA-400-93 28) One sp...
TB0325B Page 3 of 7 10/18/03 INSTALLATION Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties. SAFETY P...
TB0325B Page 4 of 7 10/18/03 ELECTRICAL CONNECTIONS Disconnect vehicle battery before making any electrical connections. Electrical connections to the amplifier are made using the wiring harness supplied. If the amplifier needs service the connector can be easily removed without unwiring the harness...
