Page 2 - Important Usage Instructions
2 Introduction Important Usage Instructions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING:Unauthorized r...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
3 Intr oducti o n IMPORTANT SAFETY INSTRUCTIONS In these safety instructions the word “product” refers to the Canon HD Video Camera Recorder XH G1S A / XH A1S A and all its accessories. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do no...
Page 5 - Ultimate HD Quality
5 Intr oducti o n The XH G1S / XH A1S - A Broad Range of Capabilities Ultimate HD Quality Improved lens with 20x zoom The lens features not only 20x zoom but also improved operability thanks to the knurled focus, zoom, and iris rings. In addition, you can now manually focus while using the zoom. 3CC...
Page 6 - About this Manual; Troubleshooting; Conventions Used in this Manual; Operating modes; Trademark Acknowledgements
6 About this Manual Thank you for purchasing the Canon XH G1S / XH A1S . Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting ( 145). Conventions Used in this Manual : Precaution...
Page 7 - About the HD/HDV and SD/DV Specifications
7 Intr oducti o n About the HD/HDV and SD/DV Specifications In the manual, a distinction is made between video signal standards (camera section) and recording standards (recorder section). The video signal can be set to HD (high definition) or SD (standard definition) specifications; the recording s...
Page 8 - Contents
8 Contents Introduction The XH G1S / XH A1S - A Broad Range of Capabilities ................................................................................... 5 About this Manual ...........................................................................................................................
Page 10 - Checking the Supplied Accessories
10 Checking the Supplied Accessories CA-920 Compact Power Adapter DC-920 DC Coupler BP-950G Battery Pack WL-D5000 Wireless Controller SD Memory Card HDVM-E63PR Digital Videocassette 2 x AA (R6) Batteries (for the wireless controller) STV-290N Stereo Video Cable DTC-1000 Component Video Cable Adjustm...
Page 11 - Components Guide; Left side view
11 Intr oducti o n Components Guide External control mode*VCR/PLAY modePower offManualAutoShutter-PriorityAperture-PrioritySpotlightNightEasy Recording Left side view Recording programs dial * Reserved mode for future software development. DISP. (display) button ( 33) PEAKING button ( 39) MAGN. (mag...
Page 12 - Right side view
12 * only. Right side view ZOOM SPEED switch ( 35) / (card/tape) switch ( 114) VIDEO 2 terminal ( 81) HD/SD SDI terminal* ( 79) GENLOCK terminal* ( 46) TIME CODE terminal* ( 46) MIC (external microphone) terminal ( 49) switches ( 50) switches ( 52) Lens hood ( 22) Lens hood locking screw ( 22) switc...
Page 13 - Front view
13 Intr oducti o n , Using tripods Do not use tripods with mounting screws longer than 5.5 mm (0.2 in.) as this may cause damage to the camcorder. To use tripods featuring 3/8" mounting screws, attach first the supplied tripod adapter base and attach the tripod to the adapter base. About the Ter...
Page 14 - Top view
14 Top view (pause) button ( 107) / DRIVE MODE button ( 117) (stop) button ( 107) / (metering mode) button ( 118) (rewind) button ( 107) / – button ( 120) (play) button ( 107) / SLIDESHOW button ( 120) (fast forward) button ( 107) / + button ( 120) REC (record) button ( 86) START/STOP button ( 30) L...
Page 15 - WL-D5000 Wireless Controller
15 Intr oducti o n WL-D5000 Wireless Controller PHOTO button ( 114) START/STOP button ( 30) MENU button ( 27) TV SCREEN button ( 74) SLIDESHOW button ( 120) DATA CODE button ( 110) INDEX WRITE button ( 74) AUDIO MONITOR button ( 83) END SEARCH button ( 34) SEARCH SELECT button ( 109, 110) REC PAUSE ...
Page 16 - Preparing the Power Supply; Charging the Battery Pack; Attaching the Battery Pack; To Remove the Battery
16 Preparations Preparing the Power Supply Charging the Battery Pack Disconnect the DC coupler from the compact power adapter before charging. Remove the terminal cover of the battery pack. 1. Connect the power cord to the compact power adapter. 2. Plug the power cord into a power outlet. 3. Attach ...
Page 17 - dial set to OFF for at least 24 hours.
17 Pre p arations Using a Household Power Outlet 1. Turn the dial to OFF. 2. Attach the DC coupler to the camcorder. Open the battery compartment cover and slide the DC coupler all the way into the compartment and press gently until it clicks. 3. Connect the power cord to the power adapter. 4. Plug ...
Page 18 - Charging, Recording and Playback Times; Battery Pack; HDV
18 Charging, Recording and Playback Times The following times are approximate and vary according to the charging, recording and playback conditions. * Approximate times for recording with repeated operations such as start/stop, zooming, power on/off. Actual time may be shorter. Battery Pack BP-930...
Page 19 - Preparing the Camcorder; Attaching and Detaching the Eye Cup; Attaching the Eye Cup; Dioptric Adjustment
19 Pre p arations Preparing the Camcorder Attaching and Detaching the Eye Cup Attaching the Eye Cup Attach the eye cup so that it covers the rubber portion of viewfinder unit. • The dioptric adjustment lever can be operated even with the eye cup attached.• For left eye use, attach the eye cup so tha...
Page 20 - Using the LCD Display; OPEN switch in the direction; Adjusting the Viewfinder/LCD Display; Adjust the setting with the SELECT/SET dial and press the dial.
20 Using the LCD Display 1. Slide the OPEN switch in the direction of the arrow to unlock the LCD panel. 2. Pull out the LCD panel. 3. Rotate the LCD panel and adjust it to the desired position. You can change the LCD display to black & white ( 21). By default, the viewfinder display is turn...
Page 21 - Using the Viewfinder and the LCD Display Simultaneously; Press the MENU button to close the menu.; Attaching an External Microphone; Loosen the microphone lock screw on the
21 Pre p arations Using the Viewfinder and the LCD Display Simultaneously By default, the viewfinder display is turned off while you use the LCD display. Follow the procedure below to use both of them simultaneously. 1. Press the MENU button. 2. Turn the SELECT/SET dial to select [DISPLAY SETUP/ ] a...
Page 22 - Place the lens hood on the front of the lens
22 Fastening the Grip Belt Adjust the grip belt so that you can reach the zoom lever with your index and middle finger, and the START/STOP button with your thumb. Attaching the Shoulder Strap Pass the ends through the strap mount and adjust the length of the strap. Be careful not to drop the camcord...
Page 23 - Opening and Closing the Terminal Covers; Opening the Terminal Covers; Open the terminal cover and pull it out.; Closing the Terminal Covers
23 Pre p arations Opening and Closing the Terminal Covers Open the covers for the following terminals in order to access them. * only. Opening the Terminal Covers 1. Open the terminal cover and pull it out. 2. Grasp the strip connecting the cover to the camcorder and pull. This step is not necessary...
Page 24 - Using the Wireless Controller; Inserting the Batteries; Insert the batteries following the + and –; Make sure to replace both batteries at the
24 Using the Wireless Controller When you press the buttons on the wireless controller, point it at the camcorder’s remote sensor. Inserting the Batteries The wireless controller operates with two AA (R6) batteries. 1. Open the battery cover. 2. Insert the batteries following the + and – markings. 3...
Page 25 - Loading/Removing a Cassette; Use only videocassettes marked with the; switch to open; Close the cassette compartment by
25 Pre p arations Loading/Removing a Cassette Use only videocassettes marked with the logo. For recording in HDV we recommend you use videocassettes designed for HDV recording. 1. Slide the OPEN/EJECT switch to open the cassette compartment cover. The cassette compartment opens automatically. 2. Loa...
Page 26 - Inserting/Removing a Memory Card; You can use only; Inserting the Card
26 Inserting/Removing a Memory Card You can use only SDHC (SD High Capacity) memory cards, SD memory cards or MultiMedia Cards (MMC) with this camcorder. Inserting the Card 1. Set the dial to OFF. 2. Push the OPEN switch in the direction of the arrow to open the battery/memory card compartment cover...
Page 27 - Changing Settings with the MENU Button; Selecting Menus and Settings; Press the MENU button to open the
27 Pre p arations Changing Settings with the MENU Button Many of the camcorder’s functions can be changed from the on-screen menu. Selecting Menus and Settings 1. Press the MENU button to open the menu. 2. Turn the SELECT/SET dial to select a submenu and press the dial. 3. Turn the SELECT/SET dial t...
Page 28 - Press the MENU button to close the menu and start the clock.
28 Language and Date/Time Settings Changing the Display Language The default language for displays and menu items is English. The language can be changed to German, Spanish, French, Italian, Polish, Russian, simplified Chinese or Japanese. To change the display language, open the menu and select [DI...
Page 30 - Recording; Recording; Press the lock button and set the; When You Have Finished Recording; Before You Begin Recording
30 Recording Recording The default recording standard is HDV. About the audio recording, refer to the relevant chapter ( 49). Recording 1. Remove the lens cap. 2. Move the / (card/tape) switch to . 3. Press the lock button and set the dial to a recording program. 4. Press the START/STOP button to be...
Page 31 - Power Saving Mechanisms; Power Save Function; VCR Stop Function
31 Recor d ing Low-angle Recording The carrying handle is equipped with a duplicate set of recording and zoom controls, ideal for low-angle recording. Slide the LOCK switch in the direction of the arrow to prevent the accidental operation of these controls. Power Saving Mechanisms Power Save Functio...
Page 32 - Screen Displays while Recording; Time code; Remaining battery charge
32 Screen Displays while Recording Time code You can select between drop frame or non-drop frame time code ( 44). Remaining tape Indicates the remaining time on the tape in minutes.“ END” will appear when the tape reaches the end. • When the time left is less than 15 seconds, the remaining tape time...
Page 33 - Selecting the On-Screen Displays; Reviewing the Recording; Press and release the
33 Recor d ing Selecting the On-Screen Displays You can select the amount of information shown on the screen from full, partial or no display. Repeatedly pressing the DISP. button will cycle through the options in the following sequence. 1 This level cannot be selected if [SYSTEM SETUP/ ] [ALL DISPL...
Page 34 - Locating the End of the Last Scene; Press the END SEARCH button.
34 Selecting the Signal Standard and Aspect Ratio You can select the signal standard of your recording (high definition or standard definition) and, for standard definition recordings, also the aspect ratio of the recording. Since the displays on the camcorder have an aspect ratio of 16:9, when you ...
Page 35 - Zooming; Move the zoom lever toward; Zoom Speed; Zoom lever on the side grip:; ZOOM SPEED switch; VAR
35 Recor d ing Zooming You can operate the zoom using the zoom lever on the side grip or the one on the carrying handle. You can also use the zoom ring on the lens or the zoom buttons on the wireless controller. With the customized functions ( 97) you can change the direction and response sensitivit...
Page 36 - Zoom buttons on the carrying handle:; Zoom buttons on the supplied wireless controller:; Zoom Preset; Presetting the Zoom; Set the POSITION PRESET switch to; Returning to the Preset Zoom Position; Move the POSITION PRESET ON/SET switch to ON.
36 Zoom buttons on the carrying handle: The zoom speed is constant and can be set to one of 16 zoom speed levels. Set the ZOOM SPEED switch to C (constant) and change the zoom speed level as described previously. Zoom buttons on the supplied wireless controller: The zoom speed is constant and cannot...
Page 37 - Adjusting the Focus; The camcorder can be set to Autofocus or Manual Focus.; and Magnifying functions (; Autofocus; Follow the procedure below to change the autofocus mode.; Temporary Focus Override
37 Recor d ing Adjusting the Focus The camcorder can be set to Autofocus or Manual Focus. Autofocus The autofocus can be set to Normal AF or Instant AF*. The camcorder has also a Push AF function to allow for a temporary autofocus while focusing manually. Manual Focus With the customized functions (...
Page 38 - Manual focus; Turn the focus ring to adjust the focus.
38 When recording under bright conditions, the camcorder closes down the aperture. When the aperture value used is too large, the picture may appear blurred. Turn the built-in ND filter on/off according to the screen display ( 41). When you attach the optional Wide Converter to the camcorder, set ...
Page 39 - Using the Focus Assist Functions (Peaking and Magnifying); Peaking
39 Recor d ing Using the Focus Assist Functions (Peaking and Magnifying) In order to make manual focusing easier, you can use two assist functions: Peaking emphasizes the outlines of the subject creating a clearer contrast, and Magnifying enlarges the image on the screen. You can also combine both f...
Page 40 - Focus Preset; Presetting the Focus; Set the POSITION PRESET switch to FOCUS.; Setting the Focus Preset Speed; Returning to the Preset Focus position; Focus Limit and Macro Shooting
40 Focus Preset This function enables a focus position to be memorized. Later, you can return to the preset focus position instantly. You can also select the speed at which the camcorder returns to the preset focus position. Presetting the Focus 1. Set the focus mode switch to M. “MF” appears. 2. Se...
Page 41 - Using the ND Filter; Screen display
41 Recor d ing Using the ND Filter When recording under bright conditions, the camcorder closes down the aperture. When the aperture value used is too large, the picture may appear blurred. Turn the built-in ND filter on/off according to the screen display. When using a recording program other than ...
Page 42 - Selecting the Frame Rate
42 Selecting the Frame Rate You can select from the following frame rates depending on the recording mode: 60i, 30F, 24F (2:3 pulldown-converted) 60i, 30F, 24F (2:3 pulldown-converted or 2:3:3:2 pulldown-converted) 60i Mode Records 60 interlaced fields per second, the same as standard-definition TV ...
Page 43 - Selecting the 24F Pulldown Mode; SD
43 Recor d ing Selecting the Frame Rate Open the menu and select [SIGNAL SETUP]. Select [FRAME RATE], select a setting option and select [YES] to confirm the selection and close the menu. The selected frame rate appears on-screen. Selecting the 24F Pulldown Mode Open the menu and select [CAMERA SETU...
Page 44 - Setting the Time Code; Selecting the Frame Setting; The time code runs only when recording.
44 Setting the Time Code Selecting the Frame Setting When recording in a mode other than SD at a frame rate of 24F, you can select between drop frame or non-drop frame time code. Open the menu and select [SIGNAL SETUP]. Select the [TIME CODE] submenu and then [FRAME SETTNG]. Select a setting option ...
Page 46 - Synchronizing the Camcorder’s Time Code; camcorder offers the following synchronization options.; Connection Diagram; Genlock
46 Synchronizing the Camcorder’s Time Code You can synchronize this camcorder’s time code to an external time code generator. You can also include in the recording the user bit signal received from the TIME CODE terminal ( 48). The camcorder offers the following synchronization options. Genlock When...
Page 47 - About the Side Panel Indications
47 Recor d ing While a time code signal is being received, the [FRAME SETTNG] and [COUNT-UP] settings of the camcorder will be ignored and the external time code’s drop-frame bit will be used instead (if the external time code is non-drop frame, “NDF” will appear on the side panel). The Genlock ...
Page 48 - Setting the User Bit; the external user bit on the tape.; setting option and press the SELECT/SET dial.; Displaying the User Bit
48 Setting the User Bit The user bit display can be selected from the date or the time of recording, or an identification code consisting of 8 characters in the hexadecimal system that is useful for labeling tapes. There are sixteen possible characters: the numbers 0 to 9 and the letters A to F. If ...
Page 49 - Audio Recording; Selecting the DV Audio Mode
49 Recor d ing Audio Recording When recording on the tape in either HDV or DV standard, audio is recorded on two channels. The audio transfer rate is 384 kbps and the sampling frequency is 48 kHz. You can record audio in 16-bit mode (sampling frequency 48 kHz), or 12-bit mode (sampling frequency 32 ...
Page 50 - Recording Audio; Selecting the Audio Channel; External Microphones that can be Connected; Condenser microphones with independent power supply.
50 Recording Audio Select the audio input from the built-in microphone or external microphone (MIC terminal), XLR MIC (XLR terminals) or XLR LINE (XLR terminals). You can select the audio input independently for channel 1 and channel 2. Selecting the Audio Channel Open the menu and select [AUDIO SET...
Page 51 - Using the XLR terminals; Connect a microphone to one of the XLR; Adjusting the Audio Recording Level; microphone connected to the XLR terminal) to ATT.
51 Recor d ing Using the XLR terminals 1. Connect a microphone to one of the XLR terminals. To supply a microphone with phantom power, set the corresponding switch to ON. Make sure to connect the microphone first, before turning the phantom power on. Keep the microphone connected when turning off th...
Page 52 - Manual Audio Adjustment
52 Hiding/Displaying the Audio Level Indicator Open the menu and select [DISPLAY SETUP/ ]. Select [AUDIO LEVEL], select a setting option and close the menu. The audio level indicator can also be turned on/off with a custom key ( 73). Automatic Audio Adjustment Set the corresponding switch to A. Wh...
Page 53 - Embedded Audio
53 Recor d ing You can activate the audio peak limiter to prevent audio distortions. When activated, the audio peak limiter will limit the amplitude of audio input signals when they exceed -4 dBFS. The audio peak limiter can be activated if at least one of the channels is set to manual audio adjus...
Page 54 - Image Stabilizer
54 Image Stabilizer You can select to activate the image stabilizer or turn it off depending on the recording conditions. Open the menu and select [CAMERA SETUP]. Select [IMG STAB], select a setting option and close the menu. The image stabilizer cannot be turned off in the Easy Recording mode. We...
Page 55 - Using the Programmed AE Modes; Auto; Moving subjects may leave a trailing afterimage.
55 Recor d ing Using the Programmed AE Modes Programmed auto exposure modes provide advanced automated recording techniques ensuring professional results in various shooting conditions. Manual ( 58) This mode offers the creative freedom of a complete range of manual controls. In Manual mode, you hav...
Page 56 - Press the lock button and turn the; The symbol of the selected mode appears.
56 Easy Recording The camcorder automatically controls the focus, shutter speed, aperture, gain, white balance, and AE Shift allowing you to simply point and film. This mode locks all of these features and options, making them fixed and unadjustable. Selecting the Programmed AE Modes Press the lock ...
Page 58 - Recording in Manual Mode; Available settings; dial to
58 Recording in Manual Mode You can set the exposure at any combination of shutter speed and aperture. The aperture value can be adjusted in 1/8 EV stops; however, the aperture value displayed on the screen will change only in 1/4 EV stops. Available settings * Can only be selected if the custom fun...
Page 59 - Push AE
59 Recor d ing With the custom function [LANC AE SHIFT] ( 97), you can change the function of the AE SHIFT dial on the optional ZR-2000 Zoom Remote Controller and use it to change the aperture value. Push AE In M Manual mode you can use the Push AE function when you want the camcorder to re-establ...
Page 60 - Available shutter speeds when recording still images:; Select the shutter speed with the
60 Recording in Shutter-Priority (Tv) Mode Available shutter speeds when recording movies depend on the selected frame rate: Available shutter speeds when recording still images: 1/4, 1/8, 1/15, 1/30, 1/60, 1/100, 1/250, 1/500 1. Set the dial to Tv. 2. Select the shutter speed with the SHUTTER dial....
Page 61 - Select the aperture with the iris ring.; Av
61 Recor d ing Recording in Aperture-Priority (Av) Mode The aperture value can be adjusted in 1/8 EV stops; however, the aperture value displayed on the screen will change only in 1/4 EV stops. Available aperture values F1.6, F1.8, F2.0, F2.2, F2.4, F2.6, F2.8, F3.2, F3.4, F3.7, F4.0, F4.4, F4.8, F5...
Page 62 - Adjusting the Exposure; Exposure Lock; AE Shift; or; option and close the menu.
62 Adjusting the Exposure Exposure Lock 1. Set the dial to , Tv or Av . 2. Press the EXP. LOCK button. • The exposure indicator appears. Use the exposure indicator as an estimate. • The mark above the indicator indicates the standard exposure (calculated by the camcorder). The mark of the indicator ...
Page 63 - Gain; Assigning Gain Values to the GAIN Switch Positions; and then one of the GAIN switch options.; Gain level
63 Recor d ing Gain The gain control adjusts the level of the video signal generated depending on the lighting and shooting conditions. You can select from automatic gain control or one of 3 preset gain levels (L: low, M: middle, H: high) to which you can independently assign gain values from -3 dB ...
Page 64 - Gain Fine Tuning; Selecting the Gain Level
64 Gain Fine Tuning 1. Set the dial to M , , Tv or Av . 2. Open the menu and select [CAMERA SETUP]. Select the [GAIN SETTING] submenu and then one of the GAIN switch options. 3. Select [TUNE 0.0dB] and press the SELECT/SET dial. 4. Turn the SELECT/SET dial to select the desired gain level and press ...
Page 65 - White Balance; Selecting the Automatic White Balance; Set the AWB switch to ON.; Selecting One of the Preset Modes; dial to a recording mode; White balance setting
65 Recor d ing White Balance The camcorder uses an electronic white balance process to calibrate the picture for accurate color display under different lighting conditions. In addition to the fully automated mode, white balance modes include an indoor mode, an outdoor mode, a color temperature setti...
Page 66 - Setting the Color Temperature; Setting a Custom White Balance; Recording with a Custom White Balance Previously Set
66 Setting the Color Temperature 1. Set the dial to a recording program other than . 2. Set the AWB switch to OFF and the WHITE BAL. switch to PRE. 3. Set the WHITE BAL. PRESET switch to . The color temperature currently set will be displayed. 4. Press the WHITE BAL. button. The color temperature di...
Page 67 - Zebra Pattern; Selecting the Zebra Pattern Level; Activating the Zebra Pattern
67 Recor d ing Zebra Pattern This camcorder has a zebra pattern feature that shows black and white diagonal stripes over the areas that are overexposed. The zebra pattern is only displayed on the screen and will not affect your recordings. The zebra pattern will not be displayed while the Peaking fu...
Page 68 - Color Correction; Determining the Color to be Corrected; Adjusting the Color Correction
68 Color Correction With the color correction function you can set the camcorder to detect the characteristics of a certain color or pattern (color phase, chroma, area and Y level) and correct them automatically when recording. You can set the color correction for up to two different colors (A and B...
Page 69 - Activating the Color Correction
69 Recor d ing Activating the Color Correction 1. Open the menu and select [CAMERA SETUP] and select the [COLOR CORR.] submenu. 2. Select [CORRECT], select a correction mode and close the menu. • You can correct only the predefined A area, only the predefined B area or both.• appears. MENU ( 27) CAM...
Page 70 - Skin Detail Function; Determining the Tone to be Detected as Skin Area; Activating the Skin Detail Function; Select a setting option and close the menu.
70 Skin Detail Function With the skin detail function you can set the camcorder to detect the characteristics of a certain color or tone. Detail in the targeted areas will be softened in order to conceal skin imperfections. Targeted areas will be identified on the screen by a zebra pattern alternati...
Page 71 - Selective Noise Reduction; Determining the Area to be Corrected; Activating the Selective Noise Reduction
71 Recor d ing Selective Noise Reduction With the selective noise reduction function you can set the camcorder to detect the characteristics of a certain color or tone and automatically reduce noise in the targeted areas. This is particularly useful for chroma keying, as targeting the selective nois...
Page 72 - Clear Scan; Turn the SHUTTER dial to set the shutter
72 Clear Scan This feature allows you to record a computer’s CRT screen or other equipment without displaying black band or flicker on the screen. You can adjust the frequency from 60.1 Hz to 203.9 Hz. 1. Set the dial to M or Tv. 2. Turn the SHUTTER dial to set the shutter speed to “CS”. 3. Open the...
Page 73 - Custom Keys; To check the current custom key settings:
73 Recor d ing Custom Keys You can assign frequently used functions to the custom keys. The custom keys can have different functions assigned to them in each of the operating modes. Default settings: To check the current custom key settings: In a recording mode: Open the menu and select [DISPLAY SET...
Page 76 - [CP BKWD KEY] Custom Preset Backward Key; Press the CUSTOM KEY 2 button.
76 [CP BKWD KEY] Custom Preset Backward Key Press the CUSTOM KEY 2 button. Usually, pressing the CUSTOM PRESET SELECT button will cycle forwards to the following custom preset file. Pressing the custom key button instead will cycle backwards to the preceding custom preset file.CP backward key can on...
Page 77 - Color Bars/Audio Reference Signal; 7) you can choose between SMPTE standard-definition color bars; Select the standard of the color bars signal
77 Recor d ing Color Bars/Audio Reference Signal You can generate and record color bars signals and a 1 kHz audio reference signal. With the customized functions ( 97) you can choose between SMPTE standard-definition color bars ([TYPE 1]) and ARIB multiformat HDTV color bars ([TYPE 2]) and you can a...
Page 78 - Video Signal Output Standards; The standard of the video signal output from the HD/SD SDI (; Standard of Video Output while Recording
78 External Connections Video Signal Output Standards The standard of the video signal output from the HD/SD SDI ( only), HD/SD COMPONENT OUT and HDV/DV terminals depends on the standard used for recording (or the standard of the recording on the tape being played back) and on various menu settings....
Page 79 - Connecting to a Monitor/TV; Connection to a High Definition Monitor or HDTV; Using the HD/SD SDI Terminal; OUT and VIEWFINDER
79 Exter n al Connections Connecting to a Monitor/TV The different recording modes and the corresponding output terminals are given in the table below: 1 only. 2 The VIEWFINDER COMPONENT OUT terminal is output as 480i. Connection to a High Definition Monitor or HDTV Using the HD/SD SDI Terminal HD/S...
Page 81 - Using the HDV/DV Terminal; Using the A/V1 or VIDEO 2 Terminal; TV sets equipped with the Video ID-1 System
81 Exter n al Connections Using the HDV/DV Terminal • When connecting the camcorder to a monitor or TV that supports DV input, you may need to carry out a procedure on the monitor or TV to recognize the camera. • If necessary, turn on the DV conversion and select whether to convert a tape recorded i...
Page 82 - Connection to a Standard Definition TV or Monitor
82 Connection to a Standard Definition TV or Monitor Using the HD/SD COMPONENT OUT or VIEWFINDER COMPONENT OUT Terminal • Refer to the connection diagram in the previous section ( 80). • Select the appropriate component video signal depending on the TV or monitor you connect. Open the menu and selec...
Page 83 - Audio Output; Selecting the Audio Output Level; Selecting the Audio Monitor
83 Exter n al Connections Audio Output Selecting the Audio Channel You can select the channel for audio signal output from the A/V1 terminal. * Default value in mode. Open the menu and select [AUDIO SETUP]. Select [OUTPUT CH], select a setting option and close the menu. While recording external vide...
Page 85 - Digital Video Control; If the button was pressed while the camcorder was recording:
85 Exter n al Connections Digital Video Control This feature enables the camcorder to control the record and stop functions of an external digital device connected to the camcorder through the HDV/DV terminal. The device must comply with the IEEE1394 AV/C protocol. Use the optional CV-250F (4 pin-6 ...
Page 86 - Copyright Signal
86 Recording an External Video Signal (HDV/DV In, Analog Line-In) You can record on the tape an external video signal, either from the HDV/DV input (SD or HD standard) or from the analog video input (SD standard). HDV/DV In When recording from an external digital device you can select the time code ...
Page 88 - Connecting to a Computer
88 Connecting to a Computer To connect the camcorder to a computer you will need a computer equipped with an IEEE1394 (DV) terminal and video editing software with video capturing capability installed. Use the optional CV-250F (4 pin-6 pin) DV cable or a commercially available 6 pin-6 pin DV cable. ...
Page 89 - Custom Preset Settings; Custom Preset Parameters
89 Custo m iz atio n Customization Custom Preset Settings You can select preset level for a number of picture-related parameters (23 parameters when recording movies, 17 when recording still images). A list of the parameters is given in the following table and you can find more detailed descriptions...
Page 90 - Changing Custom Preset Parameters; SELECT CP] and then select the name of the custom
90 Changing Custom Preset Parameters 1. Open the menu, select [CUSTOMIZE] and then select the [CUSTOM PRESET] submenu. The custom preset submenu appears. 2. Select [ EDIT] from the column on the left. The cursor will move to the bottom bar of the custom preset editing screen. To return one level bac...
Page 91 - Renaming a Custom Preset File; When you finish renaming the custom preset file, press the dial.; Protecting a Custom Preset File; Resetting a Custom Preset File
91 Custo m iz atio n Renaming a Custom Preset File Follow steps 1-3 in Changing Custom Preset Parameters ( 90) to select the custom preset file you want to rename. 1. From the bottom bar, select [ RENAME]. The first character of the custom preset file name will start flashing. 2. Turn the SELECT/SET...
Page 92 - Activating the Custom Preset Settings; Copying a Custom Preset File to the Memory Card
92 Activating the Custom Preset Settings 1. Press the CUSTOM PRESET SELECT button. • Repeatedly pressing the button will cycle through the available custom preset files. You can also set a custom key as [CP BKWD KEY] to cycle through the custom preset files in reverse order (from last to first) ( 73...
Page 93 - Reading a Custom Preset File from a Still Image; 7) you can select to save the custom preset settings; CARD
93 Custo m iz atio n Reading a Custom Preset File from a Still Image With the custom function [PHOTO BUTTON] ( 97) you can select to save the custom preset settings currently in use along with a still image recorded in mode (simultaneous recording, 115). This is very useful when you want to load the...
Page 97 - Customized Functions; mode. You can adjust up to 3 different; Changing the Custom Function Settings; Make the selection as necessary and press the dial.
97 Custo m iz atio n Customized Functions You can customize to your personal preferences many aspects of the operation of the camcorder, most of them governing how the camcorder operates in mode. You can adjust up to 3 different custom function files and save them on the camcorder or to a memory car...
Page 98 - Copying a Custom Function File to the Memory Card; Select the destination file on the memory card [; Reading a Custom Function File from the Memory Card; the settings from the memory card.
98 Resetting a Custom Function File 1. Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION] submenu. 2. From the column on the left select the custom function file you want to reset. 3. From the bottom bar select [ RESET]. 4. Select [OK], press the SELECT/SET dial and close the me...
Page 100 - List of Custom Functions and Setting Options; The default value for all items is the option assigned to 00.
100 Availability of custom functions in each recording program/playback mode ( Still Images) * Only during exposure lock. List of Custom Functions and Setting Options The default value for all items is the option assigned to 00. [SHCKLSS WB/GN] Shockless White Balance/Gain The shockless setting will...
Page 103 - Customized On-Screen Displays; Changing the Custom Display Settings; dial. Make the selection as necessary and press the dial.; press the dial and close the menu.; Resetting a Custom Display File
103 Custo m iz atio n Customized On-Screen Displays You can customize which icons to display on the screen according to your personal preferences and needs. You can save your personal settings as a custom display file on the camcorder or on the memory card. To activate the on-screen displays at the ...
Page 104 - [DV REC MODE] Recording Mode in Standard Definition
104 Reading a Custom Display File from the Memory Card 1. Open the menu, select [CUSTOMIZE] and then select [CUSTOM DISPLAY]. 2. From the column on the left select [ READ FROM CARD]. 3. Select [OK], press the SELECT/SET dial and close the menu. When the operation is finished, “TASK COMPLETED” will a...
Page 105 - [TAPE REMAINDER] Remaining Time on the Tape; [CARD] Icons Related to Recording Still Images
105 Custo m iz atio n [TAPE] Tape-Related Icons and Displays Setting Options: [TIME CODE] Time code display: [OFF], [ON] [OPERATION MODE] Icon of the current tape operation: [OFF], [ON] [DV CONTROL] DV control icon: [OFF] , [ON] [TAPE REMAINDER] Remaining Time on the Tape You can select to display t...
Page 106 - Location of the Custom Displays
106 Location of the Custom Displays / 03 02 02 06 04 00 01 02 06 14 07 07 19 19 18 21 08 08 10 09 11 19 12 12132005121418 03 02 02 06 04 00 01 02 06 07 07 16 15 21 15 16 14 17192005 08 14
Page 107 - Playing Back a Tape; Special Playback Modes
107 Playback Playback Playing Back a Tape Select a playback standard according to the tape you wish to play back. 1. Turn the dial to and set the / (card/tape) switch to . 2. Open the menu and select [SIGNAL SETUP]. Select [PLAYBACK STD] and set it to [AUTO], [HDV] or [DV] to match the tape you wish...
Page 108 - Adjusting the Volume of Headphones or the Built-in Speaker; Turn the SELECT/SET dial to adjust the volume.; DV
108 (frame advance) Plays back frame-by-frame. Repeatedly press the button on the wireless controller during playback pause. Hold the button pressed down to enter the continuous frame advance playback. (slow forward) Plays back at about 1/3 normal speed. Press the SLOW button on the wireless control...
Page 109 - Returning to a Pre-marked Position; This function is operated with the wireless controller.; Index Search; Press the SEARCH SELECT button to display the
109 Playback Returning to a Pre-marked Position If you wish to return to a particular scene later, mark the point with the zero set memory, and the tape will stop at that point when you rewind/fast forward the tape. This function is operated with the wireless controller. 1. During playback, press th...
Page 110 - Date Search; Data Code; Selecting the Data Code; Displaying the Data Code; Press the DATA CODE button on the wireless controller.
110 Date Search You can locate the change of the date/time zone with the date search function. This function is operated with the wireless controller. 1. Press the SEARCH SELECT button to display the icon. 2. Press the or button to begin searching. • Press more than once to search for further date c...
Page 111 - Remote Sensor Mode; To change the remote sensor mode of the camcorder; To change the remote sensor mode of the wireless controller
111 Playback Remote Sensor Mode Two remote sensor modes and an off setting are available to prevent interference from other Canon wireless controllers being used nearby. To change the remote sensor mode of the camcorder Open the menu and select [SYSTEM SETUP/ ]. Select [WL.REMOTE], select a setting ...
Page 112 - Selecting the Still Image Quality/Size; Changing the Still Image Quality; You can choose from Super fine, Fine and Normal.; Changing the Still Image Size
112 Using a Memory Card Selecting the Still Image Quality/Size Changing the Still Image Quality You can choose from Super fine, Fine and Normal. * Only when playing back a tape. Open the menu and select [RECORDING SETUP]. Select [IMG QUALITY], select a setting option and close the menu. Changing the...
Page 113 - File Numbers
113 Using a Mem o ry Ca rd Number of still images that can be recorded on a memory card These figures are approximate. They vary according to recording conditions and the subject. The total number of still images that can be recorded will decrease if you store custom preset files on the card. * Appr...
Page 114 - Recording Still Images on a Memory Card; dial to a recording program and set the
114 Recording Still Images on a Memory Card You can record still images directly on the memory card. You can also record still images on the memory card simultaneously while recording video on the tape and capture still images while playing back a tape. 1. Turn the dial to a recording program and se...
Page 115 - Capturing a Still Image from a Tape; 7) you can select to activate the capturing of a still
115 Using a Mem o ry Ca rd If [CAMERA SETUP] [FOCUS PRI.] is set to [ON]: When you press the PHOTO button fully, before turns green, it may take up to 2 seconds (4 seconds in Night mode) until the focus is adjusted. If the subject is not suitable for autofocus, the camcorder locks the focus. In th...
Page 116 - Screen Displays during Still Image Recording; Reviewing a Still Image Right After Recording; Image Quality and Size; ” Card Access Display
116 Screen Displays during Still Image Recording Reviewing a Still Image Right After Recording You can select to display a still image for 2, 4, 6, 8 or 10 seconds after it has been recorded. Open the menu and select [CAMERA SETUP]. Select [REVIEW], select a setting option and close the menu. Rega...
Page 117 - Drive Mode; Changing the Drive Mode; Auto Exposure Bracketing
117 Using a Mem o ry Ca rd Drive Mode Changing the Drive Mode 1. Set the dial to a recording program other than and move the / (card/ tape) switch to . 2. Press the DRIVE MODE button to switch between the drive modes. Pressing the button will cycle through the drive modes. The icon of the selected d...
Page 118 - Metering Mode; and set the
118 Metering Mode 1. Set the dial to M , , Tv or Av , and set the / (card/tape) switch to . 2. Press the button. • Pressing the button will cycle through the metering modes. The icon of the selected metering mode will appear on the screen. • If you selected Spot AE, the Spot AE frame appears in the ...
Page 119 - Using an Optional Flash; Connecting a Speedlite Flash; dial to a recording mode other than
119 Using a Mem o ry Ca rd Using an Optional Flash You can use E-TTL II-compatible Canon Speedlite flashes designed for use with Canon SLR cameras, including the 420EX/430EX/430EX II/550EX/580EX/580EX II models, to record natural still images under low light conditions. Refer also to the instruction...
Page 120 - Playing Back Still Images from a Memory Card; Slideshow
120 Playing Back Still Images from a Memory Card 1. Turn the dial to and set the / (card/tape) switch to . 2. Press the + or – button to move between images. Pressing the + button displays the next image and the - button displays the previous image. Still images not recorded with this camcorder, u...
Page 121 - Image Jump Function; Press and hold the; Displaying the Recording Data; Repeatedly press the DISP. button to display the recording data.
121 Using a Mem o ry Ca rd Image Jump Function You can locate still images without displaying them one by one. The number in the upper right of the screen indicates the number of the current still image out of the total number of still images. Press and hold the + or – button. When you release the b...
Page 122 - Erasing Still images; You can erase still images one at a time or all at once.; Erasing a Single Still Image; Select the still image you wish to erase.; Erasing All Images
122 Erasing Still images You can erase still images one at a time or all at once. Be careful when erasing still images. Erased still images cannot be recovered. Erasing a still image that had a custom preset file embedded (recorded with the [PHOTO + CP DATA] setting) will erase the still image a...
Page 123 - Protecting Still images; Protecting a Single Still Image; Select the still image you wish to protect.; Protecting Still Images from the Index Screen; Move the zoom lever toward; Select the image you wish to protect and press the dial.; Close the menu to return to the index screen.
123 Using a Mem o ry Ca rd Protecting Still images You can protect important still images from accidental erasure when displaying a single image or the index screen. If a memory card is initialized, all still images, even protected ones, will be erased permanently. Protecting a Single Still Image 1....
Page 124 - Initializing a Memory Card
124 Initializing a Memory Card Initialize new memory cards, or when you get the message “CARD ERROR”. You can also initialize a memory card to erase all data recorded on it. The regular initialization option [INITIALIZE] will clear the file allocation table but will not physically erase the stored d...
Page 125 - Print Order Settings; Selecting Still Images for Printing (Print Order); Select the still image you wish to print.; Setting Print Orders from the Index Screen; Close the menu to return to the index screen.; Erasing All Print Orders
125 Using a Mem o ry Ca rd Print Order Settings You can select still images for printing and set the number of copies. These print order settings are compatible with the Digital Print Order Format (DPOF) standards and can be used for printing on DPOF-compatible printers. A maximum of 998 still image...
Page 126 - Menu Options and Default Settings; and 2 will be output.; Setting
126 Additional Information Menu Options and Default Settings In the following tables, default settings are shown in boldface and the availability of menu settings in different operating modes is indicated with the following icons: : CAMERA MENU ( dial set to one of the recording modes, / switch set ...
Page 132 - Custom Preset Submenu (CUSTOMIZE CUSTOM PRESET)
132 * Available only when recording movies. Custom Preset Submenu (CUSTOMIZE CUSTOM PRESET) Submenu item Action (Parameter and) Setting Options EDIT SELECT CP 1 PRESET_A , 2 PRESET_B, 3 PRESET_C, 4 PRESET_D, 5 PRESET_E, 6 PRESET_F, 7 VIDEO.C, 8 CINE.V, 9 CINE.F TUNE [GAM] GAMMA* NORMAL , CINE1, CI...
Page 133 - Custom Function Submenu (CUSTOMIZE CUSTOM FUNCTION)
133 Addi tional Inform ation Custom Function Submenu (CUSTOMIZE CUSTOM FUNCTION) Submenu item Action (Custom Function and) Setting Options C.Fn1,C.Fn2,C.Fn3 APPLY THIS SET DISABLED, ACTIVE TUNE 00 SHCKLSS WB/GN 00 (00 to 03) 01 AE RESPONSE 00 MIDDLE , 01 HIGH, 02 LOW 02 ZOOM RING CTRL 00 NORMAL , ...
Page 134 - Custom Displays
134 Custom Displays Menu item Action (Custom Display and) Setting Options CUSTOM DISPLAY TUNE 00 REC PROGRAMS 00 OFF, 01 ON 01 CAMERA DATA1 03 (00 to 03) 02 CAMERA DATA2 07 (00 to 07) 03 ZOOM 00 OFF, 01 ON(NORMAL) , 02 ON(ALWAYS) 04 FOCUS 00 OFF, 01 ON(NORMAL) , 02 ON(ALWAYS) 05 ND 00 OFF, 01 ON 0...
Page 135 - Settings Memorized and Retained
135 Addi tional Inform ation Settings Memorized and Retained The following lists show the settings that are memorized and retained under different circumstances like turning off the camcorder or changing operating modes. If the built-in lithium button battery discharges completely, all settings will...
Page 136 - Screen Displays; Screen Displays during Recording
136 Screen Displays Screen Displays during Recording You can find additional explanations on pages 32 and 116. Most of the on-screen displays and icons can be customized using the custom displays ( 103). Programmed AE ( 55) Shutter speed* ( 58, 60) Aperture* ( 58, 61) Exposure lock ( 62)/ AE shift (...
Page 137 - Screen Displays during Playback
137 Addi tional Inform ation Screen Displays during Playback Audio monitor ( 83) Audio output ( 83) Custom function ( 97) Custom keys ( 73) Data code ( 110) Date search ( 110)/ Index search ( 109)/ End search ( 34) Recording standard ( 34) Frame rate ( 42) Tape operation ( 107) Recording Record paus...
Page 138 - Side panel
138 Side panel Time code Tape has reached the end Remaining battery chargeGenlock Audio level indicator Time code setting Video output signal from the HD/SD SDI Terminal Time code synchronization setting
Page 139 - List of Messages; Message
139 Addi tional Inform ation List of Messages (in alphabetical order) Message Explanation CARD ERROR A memory card error occurred. The camcorder cannot record or play back the image.The error may be temporary. If the message disappears after 4 seconds and flashes in red, turn the camcorder off, remo...
Page 140 - Camcorder Handling Precautions; Be careful of heat generated by lighting equipment.; Storage; make sure that the camcorder is still working properly.; Cleaning; Camcorder Body and Lens; volatile solvents such as paint thinner.; LCD Screen; it with a soft dry cloth.
140 Maintenance/Others Camcorder Handling Precautions Do not carry the camcorder by the viewfinder, the LCD panel, or the microphone. Do not leave the camcorder in places subject to high temperatures, such as a sun-heated car, and high humidity. Do not use the camcorder in places subject to st...
Page 141 - Viewfinder; Battery Pack Handling Precautions; cause a short circuit and damage the battery pack.
141 Addi tional Inform ation Viewfinder 1. Open the protecting cover (e.g. using a flathead screwdriver). 2. Clean the glass with a cotton swab. 3. Reattach the protecting cover. Be careful not to scratch the glass when cleaning it. Battery Pack Handling Precautions Charged battery packs continue ...
Page 142 - About the battery terminal cover; Cassette Handling Precautions; stored for a long time.; Protecting Tapes from Accidental Erasure; Memory Card; card reader or PC/PCMCIA memory card adapter.
142 About the battery terminal cover The battery terminal cover has a [ ]-shaped hole. This is useful when you wish to differentiate between charged and uncharged battery packs. For example, with charged battery packs, attach the terminal cover so that the [ ]-shaped hole shows the blue label. Casse...
Page 143 - Built-in Rechargeable Lithium Battery; To recharge the built-in lithium battery:; Video Heads; Consult a Canon Service Center.
143 Addi tional Inform ation Moving a memory card rapidly between hot and cold temperatures may cause condensation to form on its external and internal surfaces. If condensation forms on the card, put it aside until the droplets have evaporated completely. Do not touch or expose the terminals to...
Page 144 - Condensation; Condensation may form in the following cases:; How to avoid condensation:; Using the Camcorder Abroad; Power Sources
144 Condensation Moving the camcorder rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if condensation is detected. Continued use may damage the camcorder. Condensation may form in the following cases: When...
Page 145 - Power Source
145 Addi tional Inform ation Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Recording/Playback Recording Problem Cause Solution Camcorder will not turn on. Battery pack is not cor...
Page 147 - System Diagram; (Availability differs from area to area)
147 Addi tional Inform ation System Diagram (Availability differs from area to area) ZR-1000 Zoom Remote Controller Battery Video LightVL-10Li ll FS-72U Filter Set WL-D5000 Wireless Controller MiniDV Video Cassette HC-4200 System Case TA-100 Tripod Adapter SS-1100 Shoulder Strap DC-920 DC Coupler BP...
Page 148 - Optional Accessories; Battery Packs
148 Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center. Battery Packs The BP-950G is also available as an optional accessory.Th...
Page 149 - ZR-2000 Zoom Remote Controller; Product Codes; Provided accessories:
149 Addi tional Inform ation CH-910 Dual Battery Charger/Holder The CH-910 can charge two battery packs consecutively. You can also power the camcorder by connecting the CH-910 with charged battery packs to the camcorder. When you attach two battery packs, a battery pack can be exchanged without int...
Page 150 - Specifications; System
150 Specifications XH G1S / XH A1S * The camcorder’s operations have been tested with SD/SDHC memory cards up to 16 GB. Performance cannot be guaranteed for all memory cards. ** The camcorder supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication betwe...
Page 151 - CA-920 Compact Power Adapter; Terminals
151 Addi tional Inform ation CA-920 Compact Power Adapter BP-950G Battery Pack Weight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice. Terminals Video Terminals A/V1 : ∅ 3.5 mm mini jack (audio and video), VIDEO 2 : BNC jack (video only) 1 Vp-p/75 ohms...
Page 152 - Index
152 Index A Abroad, using the camcorder . . . . . . . . . . . . . . . . . . . . . . . 144 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 148 AE shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 AEB - Auto exp...
Page 154 - CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY; CANADA
154 CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED STATES The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to Canon Consumer Digital Video Equipment (the “Equipment”) purchased in the United States. This limited warranty is only e...