Canon Scanner- User Manual
Canon Scanner– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installing CapturePerfect
- Page 3 – Using the CapturePerfect; Starting CapturePerfect
- Page 4 – Closing CapturePerfect
CapturePerfect Setup Guide
The setup disc included with the scanner contains the following software:
●
ISIS/TWAIN driver
This driver allows this scanner to be used with ISIS-compatible application
software or TWAIN-compatible application software. The driver must be
installed in order to be able to use the scanner.
●
CapturePerfect
This is a TWAIN-compatible software application. Install this application
if necessary.
This Setup Gide explains the procedure how to install the CapturePerfect.
As for the installation of the ISIS/TWAIN Driver, please refer to the separated
manual “ISIS/TWAIN Driver Instructions”.
Notice
Before installing the CapturePerfect, be sure to open and read the Readme.txt
file on the setup disc.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Canon Scanner
Summary
Installing CapturePerfect Follow the procedure described below to install CapturePerfect. 1. Turn on your PC. Windows starts. Notice If you are using Windows NT 4.0 Workstation, Windows 2000 Professional,or Windows XP, be sure to log on as a user with administrator privileges. 2. Load the setup disc...
Using the CapturePerfect Follow the procedure described below to start and close CapturePerfect. Note The basic method for scanning using CapturePerfect is described in theCapturePerfect help. From the Help menu on the CapturePerfect menu bar,click Help, then refer to the explanation of how to use C...
Closing CapturePerfect 1. On the File menu, click Exit. CapturePerfect closes. Note When the scanner is scanning or some operation is pending after scanning hasbeen started (such as when scanning has been interrupted), the mouse pointerchanges to an hourglass. If the mouse pointer appears as an hour...
