Page 2 - Introduction; Important Usage Instructions
2 E Introduction Important Usage Instructions CAUTION:CUSTOMERS IN THE U.K. SHOULD READ THIS BEFORE USING THIS PRODUCT. CHANGING THE FUSE THE MAINS LEAD ON THIS PRODUCT IS FITTED WITH A NON-REWIREABLE(MOULDED) PLUG, INCORPORATING A 3 AMP FUSE. SHOULD THE FUSE NEED TOBE REPLACED AN ASTA OR BSI APPROV...
Page 3 - Contents
Important Usage Instructions ....................2Thank you for Choosing a Canon ..............4Introducing the MV4/MV4i/MV4i MC ....5 Finding Your Way Around the Camera ......6 ~ Preparations ~ Powering Your Camcorder ........................9Loading a Cassette ..................................12 ...
Page 4 - Thank you for Choosing a Canon; Getting started
4 E Introduction Thank you for Choosing a Canon Your camcorder is supplied with thefollowing accessories: Wireless ControllerMV4/MV4i:WL-D76MV4i MC:WL-D75 Two AA batteries Lens cap and lens capcord BP-406 Battery Pack S-150 S-video Cable STV-250N StereoVideo Cable Lithium button battery DC-400 DC Co...
Page 5 - From wide-angle to 10
Using a DV cable, connectthe MV4/MV4i/MV4i MCto a PC equipped with aDV terminal and transferyour original images toyour PC. 5 E Introduction Stabilizes yourrecordings even in longtelephoto shots. Introducing the MV4/MV4i/MV4i MC The MV4/MV4i/MV4iMC has the technology tocapture crisp, clear,digital s...
Page 6 - Finding Your Way Around the Camera
6 E Mastering the Basics Finding Your Way Around the Camera CARD (LINE-IN) REC SEARCH D.EFFECTS MIX/SLIDE SHOW INDEX SCREEN REC PAUSE ON/OFF MENU button (p. 36) Start/stop button (p. 15) EXP button (p. 69) FOCUS/DATA CODE button (p. 72, 75) OPEN/EJECT switch (p. 12) LCD panel OPEN button (p. 20) BAT...
Page 9 - Powering Your Camcorder; Provide power from a mains outlet; or; Charge a battery pack; move the adapter away from the TV or the aerial cable.; Connecting the camera to a mains outlet; • Press the BATT. release button and remove the coupler.
9 E Mastering the Basics Powering Your Camcorder Before operating your camera, you will need to use the power adapter to: Provide power from a mains outlet or Charge a battery pack • The power adapter converts current from a household power socket (100–240 V AC, 50/60 Hz) to the DC current used by y...
Page 10 - Charging and attaching the battery packs
10 E Mastering the Basics Charging and attaching the battery packs Your battery pack was partially charged before it left the factory. It should haveenough power for you to check that your camera is working properly. However,you must charge the battery pack fully if you want it to power the camera f...
Page 11 - • When powering your camcorder from a mains outlet, you do not need to; CA-410 Compact Power Adapter
11 E Mastering the Basics • When powering your camcorder from a mains outlet, you do not need to remove battery packs attached to the adapter, but charging will not take placeuntil you remove the DC coupler from the adapter. • Do not connect the power adapter to an unspecified product.• You can find...
Page 12 - Loading a Cassette; Make sure that you have attached a power source.
12 E Mastering the Basics Loading a Cassette 1. Make sure that you have attached a power source. 2. Slide the OPEN / EJECT 5 switch upwards to release the cassette compartment cover. • Pull the cover fully open (while holding the button upwards) and wait a couple of seconds for the cassette compartm...
Page 13 - Protecting tapes from accidental erasure; mark flashes in the display. (The MV4i and MV4i MC; Cassette memory; damage the camcorder.; Handling cassettes
13 E Mastering the Basics Protecting tapes from accidental erasure To protect your recording from accidental erasure, slide the tab on the cassette sothat it exposes the hole. (This switch position is usually labelled SAVE or ERASEOFF.)If you load this cassette and put the camera in record pause mod...
Page 14 - Basic Recording; • Removed the lens cap (; Before you start recording
14 E Mastering the Basics Basic Recording Have you completed the following steps?• Attached a power source ( 9). • Removed the lens cap ( 126). • Chosen the display: viewfinder ( 126) or LCD screen ( 20). • Extended the viewfinder ( 126)/adjusted the LCD screen ( 20). • When you’re using the viewfin...
Page 15 - Slide the program selector to; point and shoot without making any manual adjustments (; Press and release the start/stop button once to begin recording.; • The camera returns to record pause mode and PAUSE reappears in the; When you have finished recording
15 E Mastering the Basics 3. Slide the program selector to [ . • This selects the camera’s Easy Recording program. It allows you to simply point and shoot without making any manual adjustments ( 55). 4. Press and release the start/stop button once to begin recording. • For still image recording to a...
Page 16 - SP or; About all 3 extended recording modes; Changing the recording mode; In
16 E Mastering the Basics REC MODE••••SP VCR SET UP ( 34) To change the recording mode, open the menu and select VCR SETUP. Then select REC MODE, set it to LP, SP or LP and close the menu. About all 3 extended recording modes • When recording and playing back tapes in one of the extended recording m...
Page 17 - About SP and LP modes
17 E Mastering the Basics 16:9 (Widescreen TV recording) Produces images in the 16:9 format forplayback on widescreen TVs. To switch 16:9 to ON, open the menu and select CAM.SET UP. Thenselect 16:9, set it to ON and close the menu. • “16:9” is shown in the display when you switch the 16:9 mode on.• ...
Page 18 - Confirmation/Warning beeps
18 E Mastering the Basics The camera’s short operation confirmation beeps are indicated by ` in the illustrations. Beeps sound upon certain camera operations such as when you turnthe camera on, during the self-timer countdown, right before the camera’sautomatic shut-off, and also upon any unusual co...
Page 19 - digital zoom; Zooming; optical zoom
19 E Mastering the Basics 40 × digital zoom Magnifies the camera's zoom range by up to 4 × . The zoom control continues to work as usual. You can freely zoom in and outbetween 1 × and 40 × magnification — the camera automatically switches between optical zooming (up to 10 × ) and digital zooming (10...
Page 20 - Using the LCD Screen; Open the LCD screen; it flat against the side of the camera.
20 E Mastering the Basics Using the LCD Screen Push the LCD panel OPEN button andopen the panel by pulling it away fromthe camera. This automaticallyswitches the LCD screen on and theviewfinder off. When you close theLCD panel, the LCD screenautomatically switches off and theviewfinder switches back...
Page 21 - Adjusting the LCD screen; You can adjust the brightness of the LCD screen.; outdoors or in a window. Doing so could cause damage.; About the LCD Screen
21 E Mastering the Basics Adjusting the LCD screen You can adjust the brightness of the LCD screen. BRIGHTNESS•• DISP.SET UP – + ( 34) • Be careful not to leave the LCD, viewfinder or lens exposed to direct sunlight outdoors or in a window. Doing so could cause damage. • Bright light falling on the ...
Page 22 - • These and all other indicators appear normally in the viewfinder.; Allowing the subject to monitor recording
22 E Mastering the Basics REC REC PAUSE EJECT NO CARD < < < < CARD ACCESS • These and all other indicators appear normally in the viewfinder. The indicators that appear in the LCD display when MIRROR isturned on: Allowing the subject to monitor recording When you turn the LCD panel so th...
Page 23 - Playing Back a Cassette; Attach a power source and turn the POWER dial to PLAY (MV4i; • The power indicator lights up green.
23 E Mastering the Basics Playing Back a Cassette You can use the LCD screen for instant, on-the-spot playback. The camera alsoplays back the sound track via the built-in speaker ( 26). • When you play back a tape, you can also close the LCD panel with its screen side facing up. Operate the camera w...
Page 24 - Playback pause; Other playback modes
24 E Mastering the Basics Playback pause Press the a a (pause) button. To resume normal playback, press it again, or press the e e (play) button. The camera automatically goes into stop mode after about 5 minutes’ playback pause. Fast forward playback To play back the recording at about 11.5 times n...
Page 25 - ae; Special playback
25 E Mastering the Basics Frame Advance To play back frame by frame, press the +/ ae button repeatedly during playback pause.Press and hold to play back continuous frameadvance. Frame Reverse To play back in reverse frame by frame, pressthe –/ 4a button repeatedly during playback pause.Press and hol...
Page 27 - Connections for Playback on a TV Screen; Attaching the DU-300 Docking Unit; Attaching the Ferrite Core
27 E Mastering the Basics Connections for Playback on a TV Screen You can connect the camera to a TV or VCR in order to play back yourrecordings. You will need to attach a power source to the camera ( 9). Power off all devices before starting the connections. See your TV or VCR instruction manual fo...
Page 28 - ø 3.5 mm stereo minijack; in; Connect the red plug to the red audio terminal; VIDEO
28 E Mastering the Basics Specifications S-video terminal output 1 Vp-p (Y signal), 0.3 Vp-p (C signal) (MV4i/MV4i MC: input/output)Microphone terminal ø 3.5 mm stereo minijack – 57 dBV (with 600 ohm mic)/ at least 5 kohms Headphone terminal ø 3.5 mm stereo minijack LANC u u terminal ø 2.5 mm mini m...
Page 29 - • Attach the DU-300 Docking Unit in order to use the S-video terminal (
29 E Mastering the Basics • Attach the DU-300 Docking Unit in order to use the S-video terminal ( 27). • Use the S-150 S-video Cable to connect the S-video terminals. Use the STV-250N Stereo Video Cable to connect the AUDIO terminals. Connect thewhite plug to the white AUDIO terminal L (left). Conne...
Page 30 - plug to the white audio terminal; television to VIDEO.
30 E Mastering the Basics • If you are going to use the TV as a monitor while you are shooting, remember to keep the TV volume turned down as long as the camera’s audio terminals areconnected. If the sound from the TV speakers is picked up by the microphone,an unpleasant high-pitched squeal, called ...
Page 31 - Tips for Making Better Videos; Composition; lens and the microphone.; Holding the camera
31 E Mastering the Basics Tips for Making Better Videos Composition The most important element in the scene does not have tobe in the centre. For a more interesting picture, try toposition your subject so it is slightly to one side. Leavesome space on the side of the frame that the subject isfacing ...
Page 32 - Picture angle
32 E Mastering the Basics Picture angle Camera moves Close-up Instead of zooming while recording, tryto choose your picture angle before youbegin. A good way to tell a story withvideo is to begin with a long shot thatestablishes the situation, and then movein with medium shots and close-ups toshow t...
Page 33 - Turning the Image Stabilizer Off; • The
33 E Using the Full Range of Features Turning the Image Stabilizer Off MENU With most camcorders, even the slightest hand movements will be noticeableduring telephoto recording. However, the MV4/MV4i/MV4i MC’s imagestabilizer allows you to obtain steady recordings even at high magnification. To turn...
Page 34 - Using the Menus; There are 2 main menus:
34 E Using the Full Range of Features Using the Menus Many of the camera’s advanced functions are selected from menus which appearin the display. There are 2 main menus: CAM. MENU Camera menu ( 37) PLAY (MV4i and MV4i MC: VCR) MENU( 38) The MV4i MC has 2 additional main menus: C. REC MENU Card recor...
Page 35 - Selecting from the Menus
35 E Using the Full Range of Features Selecting from the Menus The following icons are used throughout this manual to show the setting for thePOWER dial. O F F POWER VC R P.SCAN MOVIE P.SCAN VCR MOVIE O F F POWER VC R P.SCAN MOVIE CARD REC CARD PLA Y P.SCAN CARDR E C CARDPLAY VCR MOVIE O F F POWER P...
Page 36 - Turn the SELECT dial and move the arrow to the desired
36 E Using the Full Range of Features TV SCREEN SET MENU MENU 1. Turn the POWER dial to the appropriate setting.2. Press the MENU button to open the menu. • One of the main menus appears, according to the POWER dial setting. 3. Turn the SELECT dial and move the arrow to the desired submenu. 4. Press...
Page 37 - Digital effects submenu; List of Menus
37 E Using the Full Range of Features CAM.SET UP SEL.SETSET MENUCLOSE SHUTTER•••••AUTO D.ZOOM••••••ON IMAGE S. •ON 16:9••••••••OFF WHITE BAL.••AUTO RETURN o !1 !3 !0 !2 !4 D.EFFECTS SEL.SETSET MENUCLOSE D.E.SELECT•• FADER•••••••––– EFFECT••••••––– M.S.SPEED•••––– M.S.SPLIT•••––– RETURN OFF q e t w r...
Page 38 - VCR set up submenu
38 E Using the Full Range of Features VCR SET UP SEL.SETSET MENUCLOSE REC MODE••••SP WIND SCREEN•ON AUDIO MODE••12bit RETURN !5 !7 !6 !8 DISP.SET UP SEL.SETSET MENUCLOSE BRIGHTNESS•• MIRROR••••••ON TV SCREEN•••ON D/T DISPLAY•OFF RETURN – + !9 @1 @3 @0 @2 r VCR set up submenu !5 Record mode ............
Page 41 - Display set up submenu
41 E Using the Full Range of Features 2 C. PLAY MENU (MV4i MC only) Appears when the POWER dial is set to . There are 4 submenus within the C. PLAY MENU. CARDPLAY C.PLAY MENU SEL.SETSET MENUCLOSE CARD OPER. VCR SET UP DISP.SET UP SYSTEM RETURN 1 3 5 2 4 DISP.SET UP SEL.SETSET MENUCLOSE BRIGHTNESS•• ...
Page 42 - Return; Return; System submenu; Return
42 E Using the Full Range of Features q -2 Card operations submenu (when displaying an index screen) y To image protect ................. 112 u To print mark ...................... 113 i Return w VCR set up submenu o Record mode ......................... 16 !0 Return e Display set up submenu !1 Brig...
Page 43 - Using the Wireless Controller/Tally Lamp; Inserting batteries
43 E Using the Full Range of Features Using the Wireless Controller/Tally Lamp The supplied wireless controller canoperate the camera from a distance ofup to 5 m (16 feet). Point it at thecamera’s remote sensor while you pressthe buttons. There are some functions that cannot beoperated without the w...
Page 44 - When Operating 2 Canon DV Camcorders (Remote Sensor Mode); To turn the remote sensor off:; • The selected mode will appear on the display for 4 seconds.; Press and hold the REMOTE SET button on the wireless controller.
44 E Using the Full Range of Features To prevent interference from otherCanon wireless controllers being used nearby, there are 2 remote sensormodes and an off setting. The wirelesscontroller and the camera have to be setto the same mode in order to becompatible. When Operating 2 Canon DV Camcorders...
Page 45 - If your wireless controller isn’t working:; You may therefore decide to turn it off.
45 E Using the Full Range of Features If your wireless controller isn’t working: Make sure the camera and the wireless controller are both set to the same mode.Check the mode the camera is set to by pushing any button other than theREMOTE SET button on the wireless controller. The camera’s mode appe...
Page 46 - Setting the Date and Time; Setting the time zone/daylight saving time; • If you are now in daylight saving time, select the time zone with the
46 E Using the Full Range of Features Setting the Date and Time The date and/or time display forms part of the data code. You can choose todisplay or hide it during playback ( 75). Set the date and time display when you first start using your camera. Install thebackup battery before you begin ( 129)...
Page 48 - • The year display starts to flash.; Turn the SELECT dial up and down to change the year. Press the; and time again from the start.; Setting the clock; Date and time display
48 E Using the Full Range of Features 1. Open the menu and select SYSTEM. 2. Select D/TIME SET. • The year display starts to flash. 3. Turn the SELECT dial up and down to change the year. Press the dial in to move to another part of the display. • Once you move from the year, the next part of the di...
Page 49 - Recording in Progressive Scan Mode; Set the POWER dial lock lever to the; • When you finish recording, return the lock lever to the
49 E Using the Full Range of Features Recording in Progressive Scan Mode 1. Set the POWER dial lock lever to the 2 2 2 2 position. 2. Turn the POWER dial to P.SCAN. • The power indicator lights up red.• PRO.SCAN appears in the display. 3. Press the start/stop button to begin recording. • When you fi...
Page 50 - Taking Still Pictures to a Cassette; tape for approximately 6 seconds (8 seconds in
50 E Using the Full Range of Features Taking Still Pictures to a Cassette You can record still pictures like a photograph. The camcorder records the pictureand sound to tape for several seconds. The exposure is automatically adjusted.MV4i MC only: Copy still photos automatically to a memory card ( 1...
Page 51 - Press the PHOTO button halfway down and hold it:
51 E Using the Full Range of Features 1. Press the PHOTO button halfway down and hold it: • “PHOTO” flashes at the bottom right of display.• Exposure is locked.• During autofocus F flashes white in the display as the camcorder adjusts the focus and it is displayed continuously as a green mark when t...
Page 52 - Searching and Reviewing While Recording; • Noise may appear on the screen when you play the tape backwards.; Record search; • The + button plays the recording forwards and the – button plays it
52 E Using the Full Range of Features Searching and Reviewing While Recording When the camera is in record pause mode, you can use record review to play backthe last few seconds of your recording and then return automatically to recordpause mode. You can quickly make sure that a scene has recorded p...
Page 53 - Using the Various Recording Programs; the program selector to the; Availability of functions in each recording program
53 E Using the Full Range of Features Using the Various Recording Programs The camera provides you with a choice of 7 recording programs. They usedifferent combinations of camera settings in order to adjust the exposure and otherfunctions to match the recording situation.• For simple point-and-shoot...
Page 54 - Slide the program selector to; • The program will appear in the display.; Setting the program AE mode
54 E Using the Full Range of Features 1. Slide the program selector to Q (program AE) mode. 2. Press the SELECT dial in to display the program menu. 3. Turn the SELECT dial to move the arrow up or down the display. 4. Press the SELECT dial in to select the desired program. • The program will appear ...
Page 55 - Easy Recording
55 E Using the Full Range of Features The simplest way to use the camera is with theprogram selector set to the [ position. The camera will take care of focus, exposure andother adjustments, leaving you free to point andshoot. Easy Recording Sports This program is useful for recording high-speedspor...
Page 56 - Spotlight
56 E Using the Full Range of Features Use this program in places where thebackground is so bright that the subject appearsunderexposed in the display — a sunny beach orski resort, for example. You may notice someshudder when recording moving subjects. Sand & Snow Spotlight This program is design...
Page 57 - Using Digital Effects; POWER dial and the recording program.; Availability of digital effects by mode
57 E Using the Full Range of Features Using Digital Effects • The types of digital effects you are able to use depends on the setting of the POWER dial and the recording program. Use the camera’s digital effects for more interesting productions. • Faders: Start or end scenes on a tape with a fade to...
Page 58 - • Digital effects operated during PLAY (MV4i and MV4i MC: VCR) mode are
58 E Using the Full Range of Features • When you do not want to use digital effects, set D.E.SELECT to OFF through the menu. • The camera remembers your chosen digital effect setting until you change it. • Digital effects can be selected but not operated on a blank blue screen (appears in PLAY mode ...
Page 59 - Faders
59 E Using the Full Range of Features Fade Trigger (FADE-T) Wipe (WIPE) When you start recording, the picturebegins as a thin vertical line in thecentre of the screen which graduallyexpands sideways until it fills thewhole of the screen. When you end ascene, the image is wiped from bothsides of the ...
Page 60 - Makes the image black and white.; Effects
60 E Using the Full Range of Features Black and White (BLK & WHT) Makes the image black and white. Adds a paint-like effect, calledsolarization, to the image. Art (ART) Sepia (SEPIA) Mosaic (MOSAIC) Makes a monochrome image with abrownish tint. Blurs the image by enlarging the size ofsome pixels...
Page 61 - buttons on the wireless controller; Operating faders; • The menu returns to the submenu.
61 E Using the Full Range of Features Digital effects can be set with the controls on the body of the camera or thewireless controller. Pressing the ▲ / ▼ buttons on the wireless controller correspond to turning the SELECT dial up and down, and pressing the SET buttoncorresponds to pressing the SELE...
Page 62 - Operating effects; If you’re in MOVIE or
62 E Using the Full Range of Features Operating effects Sound records/plays back normally.When operating effects in MOVIE, P.SCAN or CARD REC mode, make sure theprogram selector is set to Q . 1. Open the menu and select D.EFFECTS. 2. Select D.E.SELECT. 3. Select EFFECT. • You return to the D.EFFECTS...
Page 63 - Operating the multi-image screen; Select multi-image screen; Using the Multi-Image Screen
63 E Using the Full Range of Features Operating the multi-image screen When operating the multi-image screen in MOVIE, P.SCAN or CARD RECmode, make sure the program selector is set to Q . In PLAY (MV4i and MV4i MC: VCR) mode, you can only operate the multi-image screen in the following playback mode...
Page 64 - the last image is captured.
64 E Using the Full Range of Features 7. Select the desired setting. 8. Close the menu. • The digital effects menu disappears.• MULTI-S flashes in the display. 9. Push the D.EFFECTS ON/OFF button. • Manual: As you press the ON/OFF button, scenes will be captured one after another the indicated numbe...
Page 65 - Audio Recording; • “16 bit” is shown in the display for approximately 4 seconds.; External microphone and headphones
65 E Using the Full Range of Features Audio Recording To switch to the 16 bit mode, open the menu and select VCR SET UP.Then select AUDIO MODE, set it to 16 bit and close the menu. • “16 bit” is shown in the display for approximately 4 seconds. • For details on adding new sound, see p. 89.• For deta...
Page 66 - Wind screen; Attach the microphone to the adapter bracket.
66 E Using the Full Range of Features To turn it off, open the menu and select VCR SET UP. Then select WINDSCREEN, set it to OFF and close the menu. • WS | is shown in the display when you turn the wind screen off. • When the wind screen is on, some low sounds are cut out along with the sound of the...
Page 67 - Setting the Self-Timer; self-timer button on the body of the camera; For movies
67 E Using the Full Range of Features Setting the Self-Timer 1. Press the self-timer button on the body of the camera or the SELF TIMER button on the wireless controller. • SELF-T appears in the display.• To have the subject monitor recording, rotate the LCD panel 180° ( 22). 2. Press the start/stop...
Page 68 - Press a PHOTO button on the camera body or the wireless; mark flashes white then turns green
68 E Using the Full Range of Features 2. Press a PHOTO button on the camera body or the wireless controller. • The camera automatically adjusts the focus 2 seconds before thecountdown is complete. The F mark flashes white then turns green after the focus and exposure are set. If you are using the wi...
Page 69 - Adjusting Exposure Manually; Exposure lock
69 E Using the Full Range of Features Adjusting Exposure Manually To make the recorded image brighter,turn the SELECT dial upwards (to amaximum of +11). This may benecessary if the background is verybright, or if the subject is lit frombehind. To make the recorded image darker,turn the SELECT dial d...
Page 70 - Make sure the camera is set the; AUTO
70 E Using the Full Range of Features 1. Make sure the camera is set the Q (program AE) mode. 2. Press the SELECT dial in and choose AUTO from the program menu. 3. Open the menu and select CAM.SET UP. 4. Select SHUTTER. 5. Press the SELECT dial in to select the desired shutter speed. 6. Close the me...
Page 71 - Guidelines for shooting using high shutter speeds
71 E Using the Full Range of Features Guidelines for shooting using high shutter speeds • When shooting with a shutter speed of 1/1000 or higher, do not shoot the sun directly. Recommended shutter speeds when shooting: • People doing outdoor sports such as golf or tennis • Moving cars or trains or o...
Page 72 - Manual focus; Focus lock; Adjusting Focus Manually
72 E Using the Full Range of Features FOCUS/ DATA CODE Manual focus Use the SELECT dial to set the focus. • Turn the SELECT dial downward to move the focus farther away. • Turn the SELECT dial upwards to bring the focus nearer. • You cannot adjust the focus without the e mark before M.FOCUS in the d...
Page 73 - Setting the White Balance; Make sure the camera is set to the; appears in the display when you set the white balance to; b) To set the white balance yourself, point the camera at a white; have finished setting the white balance.
73 E Using the Full Range of Features Setting the White Balance 1. Make sure the camera is set to the Q (program AE) mode. 2. Open the menu and select CAM.SET UP. 3. Select WHITE BAL. 4. a) For the indoor, outdoor or auto settings, press the SELECT dial in to choose the setting. • T / U appears in t...
Page 74 - Subjects with one dominant colour, such as sky, sea or forest
74 E Using the Full Range of Features Setting the white balance manually will probably work betterthan auto white balance when shooting: Subjects with one dominant colour, such as sky, sea or forest Close-ups In rapidly changing lighting conditions In places lit by certain types of fluorescent or me...
Page 75 - • Press it once to display, once more to hide it.
75 E Using the Full Range of Features During PLAY (MV4i and MV4i MC: VCR) mode, the data code can be displayedor hidden while the camera is in play, slow or still mode. Camera data may be displayed as “– – –” during fast forward, rewind, reverseplayback, forward and reverse × 2 playback. Press the D...
Page 76 - Setting the data code; Camera data; • The data code will read “– – –” in the following situations:; Possible data code combinations:
76 E Using the Full Range of Features You can also choose to display camera data (shutter speed and exposure settings)in cassette data codes. DATA CODE•••DATE/TIME DISP.SET UP ( 34) Setting the data code Date/Time Camera data Date/Time & Camera data Time Date & Time Date DATA CODE (cassette ...
Page 77 - • When 6SEC.DATE is turned on but DISPLAYS (
77 E Using the Full Range of Features Six-second auto date The 6-second auto date appears for 6 seconds to mark the changeover of a day ifthe tape was being recorded at 12:00 midnight. It also appears for 6 seconds whenyou start playback and have the data code turned off. The 6-second auto date will...
Page 78 - Press the SEARCH SELECT button to choose between photo/date
78 E Using the Full Range of Features Searching the Tape (Photo Search/Date Search) This allows you to move quickly through still pictures recorded anywhere on atape (photo search) or between different days or areas of recording (date search)on a tape. 1. Press the SEARCH SELECT button to choose bet...
Page 79 - Returning to a Pre-Marked Position; Press the ZERO SET MEMORY button on the wireless controller; RTN
79 E Using the Full Range of Features Returning to a Pre-Marked Position Use the wireless controller to mark a point on a tape that you want to return tofollowing playback. 1. Press the ZERO SET MEMORY button on the wireless controller during playback at a point you want to return to later. • The ti...
Page 80 - Editing; Editing to a VCR; Preparations
80 E Editing Editing to a VCR 1. Find a point on your recorded cassette slightly before the section you want to copy. 2. Start to play it back while you monitor the picture on the TV. 3. Start recording on the VCR as soon as the section you want to copy appears on the screen. 4. Pause the VCR at the...
Page 81 - Dubbing with Digital Video Equipment; • Connect the Canon CV-150F DV cable (optional) with the side of the; images on the tape that is being recorded to.; Dubbing
81 E Editing Dubbing with Digital Video Equipment Digital video equipment fitted with the DV terminal lets you edit, copy andtransfer data digitally, with virtually no generation loss in image and soundquality. MV4 Side with arrow : Signal flow 1. Connect the camera and the other digital device. • C...
Page 82 - MV4i and MV4i MC; Connect the camera and the other digital device.; • Connect the Canon CV-150F DV cable (optional) with the sides of the; Turn the camera’s POWER dial to VCR and load a blank; • DV IN appears in the display.
82 E Editing REW PLAY FF REC PAUSE SEARCH SELECT ZERO SET MEMORY AUDIO DUB. STOP A/V INSERT PAUSE REMOTE SLOW + / – / × 2 REC PAUSE (LINE-IN) ON/OFF D.EFFECTS REC SEARCH MV4i and MV4i MC The MV4i and MV4i MC are equipped with the DV Recording function. TheMV4i and MV4i MC are only available in certa...
Page 83 - Copyright signal; • The camera enters record pause mode.; Start playback on the other digital device while you monitor the
83 E Editing Copyright signal Certain pre-recorded software tapes are copyright protected. If you try to playback such a cassette, “COPYRIGHT PROTECTED PLAYBACK ISRESTRICTED” appears in the display for a few seconds and then the cameradisplays a blank blue screen; you cannot view the contents of the...
Page 84 - “Connections for Playback on a TV Screen” on p. 27.; Turn the camera’s POWER dial to VCR and load a blank cassette.; Example recording from a VCR
84 E Editing OUTPUT VIDEO S(S1)-VIDEO AUDIO L R S REC PAUSE ON/OFF D.EFFECTS REC SEARCH (LINE-IN) 1. Connect the camcorder to the VCR. 2. Prepare the device. • Set the TV/Video selector on the television to Video. For further details, see “Connections for Playback on a TV Screen” on p. 27. • Turn on...
Page 85 - you want to copy and set it to playback pause mode.; • You can monitor the picture in the viewfinder or LCD.
85 E Editing 1. Find a point on your recorded cassette slightly before the section you want to copy and set it to playback pause mode. 2. Press the REC PAUSE button. • S-video and A/V IN/OUT terminals automatically work as input terminals.• The camcorder enters record pause mode. 3. Start playback o...
Page 87 - Turn the MV4i/MV4i MC’s POWER dial to VCR and load a
87 E Editing The playback tape: Use only tapes without non-recorded portions.If there are non-recorded portions or changes in the recording mode, you may notbe able to insert A/V correctly.You cannot insert A/V in the following cases:• The playback tape has been poorly recorded.• During special play...
Page 88 - appear in the display.
88 E Editing 3. Press the A/V INSERT button. • A/V INSERT and 2a appear in the display. 4. Play back the cassette in the VCR. 5. To start inserting, press the PAUSE button of the MV4i/MV4i MC. • 2a changes to 2 . 6. To stop inserting, press the STOP button of the MV4i/MV4i MC. • Inserting stops and ...
Page 89 - • To use your TV to monitor video, connect the S-video terminal (; Audio Dubbing; To connect an external microphone:; 5) in order to use an external microphone.
89 E Editing • When you add sound using the built-in microphone make sure not to connect any cables to the MIC terminal (on the DU-300). • To use your TV to monitor video, connect the S-video terminal ( 29) or the A/V terminal (use only the video plug) to your TV. You can monitor the soundwith headp...
Page 90 - Locate the point where you want to start audio dubbing, then press; • The camera becomes set to playback pause mode.; When you get to the point where you want to stop dubbing, press; 9) at the place you want to stop
90 E Editing Do not connect/disconnect any cables to/from the camera when dubbing audio orpreparing to dub audio. 1. Locate the point where you want to start audio dubbing, then press the PAUSE button. • You can use the playback buttons on the body of the camera or the special playback functions on ...
Page 91 - 5) when playing back a tape with
91 E Editing • You can not use the DV terminal while adding sound.• You might want to adjust the audio mix ( 95) when playing back a tape with added sound. • There may be a loss of sound quality if you add sound to a tape recorded on a camcorder other than the MV4. • After adding sound 3 or more tim...
Page 92 - To connect other audio equipment:
92 E Editing OUTPUT AUDIO L R - For MV4i/MV4i MC (For MV4, 89). You can add sound to the original sound on a pre-recorded tape from audioproducts (AUDIO IN) or with the internal or external microphone (MIC. IN). Theoriginal sound will not be erased. For best results, add sound to tapes that havebeen...
Page 94 - Locate the point where you want to start audio dubbing, then press
94 E Editing 4. Locate the point where you want to start audio dubbing, then press the PAUSE button. • You can use the playback buttons on the body of the camera or the special playback functions on the wireless controller in the same way as in playbackmode. • The camera becomes set to playback paus...
Page 95 - Setting the Audio Mix; • To simply choose STEREO1, STEREO2 or MIX/FIXED, make sure your
95 E Editing Setting the Audio Mix AUDIO MONITOR MIX BALANCE ST-1 ST-2 O F F PO WER P.SCAN MO VIE P L AY When you play back a tape that was recorded in 12 bit mode, you can set theaudio output to play: stereo 1 (the original sound), stereo 2 (any new sound,dubbed to the tape after recording), or mix...
Page 96 - Open the menu and select VCR SET UP. Then select OUTPUT CH,
96 E Editing When you play back a tape whose audio has been recorded on multiple channels,you can change the output channels of that sound. 1. Load a tape recorded with multiple-channel audio. 2. Open the menu and select VCR SET UP. Then select OUTPUT CH, set it to the desired setting and close the ...
Page 97 - household power socket using the power adapter.; Connecting to a PC
97 E Editing By using a DV cable and connecting the camcorder to a PC equipped with a DVterminal conforming to IEEE 1394/DV compatible capture board, you can transferimages taken with the camcorder to your PC.• While connected, it is recommended that you power your camcorder from a household power s...
Page 98 - Using a Memory Card; Memory Card Introduction; Front; SD Memory Card SDC-8M; Back; Important
98 E Using a Memory Card (MV4i MC only) The camcorder can take, store and manage still images on 2 types of memorycards: the SD (Secure Digital) Memory Card (supplied with the camcorder) or aMultiMediaCard (commercially available). The SD Memory Card has the protectswitch to protect your recording f...
Page 99 - Inserting and removing the memory card; • When you set the POWER dial to CARD PLAY, the last image recorded; Selecting the recording image quality; Select the quality of a still image to be recorded.; Make sure the POWER dial lock lever is switched to the
99 E Using a Memory Card (MV4i MC only) Inserting and removing the memory card 1. Turn the POWER dial to OFF. 2. Slide the memory card compartment cover in the direction of the arrow and open. 3. Insert straight or remove the memory card. • Push the memory card all the way in.• Remove the memory car...
Page 100 - • The number of images that can still be recorded on a memory card may
100 E Using a Memory Card (MV4i MC only) * These figures are approximate. The actual number you will be able to record varies depending on the images. Remember that the sample images alreadyrecorded on the supplied SD Memory Card are included in the total number. • The number of images that can stil...
Page 101 - File numbers; CONTINUOUS
101 E Using a Memory Card (MV4i MC only) File numbers The images you take are automatically assigned file numbers from 0101-9900 andstored in folders of 100 images each. Each folder is numbered from 101 to 998and recorded on the memory card. Sample images have been pre-recorded on thesupplied SD Mem...
Page 102 - Turning the shutter sound off
102 E Using a Memory Card (MV4i MC only) Turning the shutter sound off Makes the sound of a shutter being released when a still image is recorded to amemory card. SHTR SOUND•••••ON CARD SET UP ( 34) To turn the shutter sound off, open the menu and select CARD SETUP. Then select SHTR SOUND, set it to...
Page 103 - Recording Still Images to a Memory Card
103 E Using a Memory Card (MV4i MC only) Recording Still Images to a Memory Card -MV4i MC only- 3 PHOTO 2 1 O F F P O W E R V C R P.SCAN M O VIE CARD REC CARD PLA Y 4 PHOTO Take still images to a memory card. You can also record onto a memory cardimages from a tape in the camcorder, or images input ...
Page 105 - Recording an Image from a Cassette as a Still Image; Progressive Scan mode (; the PHOTO button halfway down and hold it.; still be recorded on the memory card appears in the display.; Press the PHOTO button fully down to record the image to the; image with only 1 full press of PHOTO button.
105 E Using a Memory Card (MV4i MC only) Recording an Image from a Cassette as a Still Image -MV4i MC only- 2 PHOTO CARD REC SEARCH D.EFFECTS MIX/SLIDE SHOW INEX SCREEN ON/OFF 3 PHOTO Record an image from a cassette onto a memory card. To automatically recordmultiple still images from a cassette to ...
Page 106 - Recording from Another DV Device as a Still Image; Connect the camera to the other digital device.; marked with the arrows facing as shown above.; Load a memory card. Then push the button next to the POWER; appears in the display.; • The shutter sound does not sound in VCR mode.; Recording
106 E Using a Memory Card (MV4i MC only) Recording from Another DV Device as a Still Image -MV4i MC only- PHOTO PHOTO O F F POW ER V C R P.S C A N MOVIE CARD REC CARD PLA Y 1. Connect the camera to the other digital device. • Connect the Canon CV-150F DV cable (optional) with the sides of the plugs ...
Page 107 - Viewing Still Images; Still images whose image file names have been changed on a PC; There are 3 ways to view still images:; One after the other automatically in order of recording; Single Image; • The last image recorded appears in the display.; Search for the desired still image by pressing the CARD +/–; the first image will take you to the last image.
107 E Using a Memory Card (MV4i MC only) Viewing Still Images -MV4i MC only- O F F PO W ER VC R P. S C AN M O V IE CARD REC CARD PLAY CARD SLIDE SHOW CARD REC SEARCH D.EFFECTS MIX/SLIDE SHOW INEX SCREEN ON/OFF Play back and view still images recorded on a memory card. (For details onconnecting to a ...
Page 108 - Card Jump Function; Slide Show
108 E Using a Memory Card (MV4i MC only) ● Card Jump Function You can jump from the current image to the desired image of unadjacent imagenumber without displaying the images one by one.The numbers shown in the upper right in CARD PLAY mode indicate the imagenumber of the current still image / total...
Page 109 - Settings of the Still Image recorded to memory card; Preventing accidental erasure (Protect; To mark an image for printing or erase print marks one at a time
109 E Using a Memory Card (MV4i MC only) Settings of the Still Image recorded to memory card -MV4i MC only- Immediately after you have recorded a still image to a memory card, you cancheck the image without switching the operation mode by the POWER dial.(CARD PHOTO REVIEW) You can also easily erase ...
Page 110 - button to; Erasing still images; To erase images one at a time
110 E Using a Memory Card (MV4i MC only) 1. During/after recoding a still image, press the CARD – button to open the CARD PHOTO REVIEW menu. • If you press the button after recording a still image, the last image recorded appears in the display. • If you press the button while recording a still imag...
Page 112 - Protecting an image while viewing an index screen
112 E Using a Memory Card (MV4i MC only) Preventing Accidental Erasure (Protect) -MV4i MC only- CARD CARD This section describes how to protect the still image from the Card Operationsubmenu when displaying an index screen in CARD PLAY mode (including theway to cancel the setting) .You can also prot...
Page 113 - Marking an image for printing while viewing an index screen; Marking a Still Image for Printing (Print Mark)
113 E Using a Memory Card (MV4i MC only) This section describes how to mark the still image for printing from Cardoperation submenu in CARD PLAY mode (including the way to cancel thesetting).– When displaying an index screen, you can mark the image for printing.– When playing back a single image, yo...
Page 114 - Erasing all print marks; • ERASE ALL PRINT MARKS; Select YES and press the SELECT dial in.
114 E Using a Memory Card (MV4i MC only) PRINT MARKS ALL ERASE CARD OPER. ( 34) Erasing all print marks Make sure a memory card that has images recorded on it has been inserted intothe camcorder. 1. With an image in the display, open the menu and select CARD OPER. 2. Select PRINT MARKS ALL ERASE. • ...
Page 115 - Erasing Still Images
115 E Using a Memory Card (MV4i MC only) CARD CARD IMAGE ERASE CARD OPER. ( 34) This section describes how to erase the still image from the Card Operationsubmenu when playing back a single image in CARD PLAY mode. (SINGLE orALL)You can also erase a still image through CARD PHOTO REVIEW ( 110) or Fi...
Page 116 - purple and is unselectable.; Select YES and press the SELECT dial in.; To erase all images on the memory card at once
116 E Using a Memory Card (MV4i MC only) 5. Select YES and press the SELECT dial in. • The image is erased and the previous image appears.• To erase another single image, move to that image with the CARD +/– buttons, and select YES. • If the image you are trying to erase is a protected image, YES ap...
Page 117 - Combining Images and Recording Them to a Cassette (Card Mix); Select from 3 types of Card Mix effects:
117 E Using a Memory Card (MV4i MC only) CARD MIX h h i i i MOVIE P.SCAN PHOTO VCR CARD REC CARD PLAY Combining Images and Recording Them to a Cassette (Card Mix) -MV4i MC only- Liven up your productions by superimposing one image on top of the other.Combine 2 still images or a still image and a mov...
Page 118 - Make sure the program selector is set to; Open the menu and select; Select; Mix level
118 E Using a Memory Card (MV4i MC only) CAM. CHROMA (Camera chroma key) - 2 pre-recorded sample images Superimpose the currently recording image on top of a still image, whichbecomes its background. Shoot the subject of the currently recording imageagainst a blue background, such as a blue curtain....
Page 119 - Press the PHOTO button halfway down and hold it.
119 E Using a Memory Card (MV4i MC only) 4. Select the desired setting. • Your currently recording image is combined with the pre-recorded still image. 5. Select MIX LEVEL. 6. Adjust the mix level. • Turning the SELECT dial upwards adjusts to the right and turning downwards adjusts to the left. 7. C...
Page 120 - Copying Still Images from a Cassette; Locate the first still image on the cassette that you want to copy; Press the stop button when your desired images have finished
120 E Using a Memory Card (MV4i MC only) Copying Still Images from a Cassette -MV4i MC only- MIX/SLIDE SHOW INEX SCREEN Copies multiple still images from a tape to the memory card, using the PhotoSearch function.• The still images’ data codes will reflect the date and time the copies are made. Make ...
Page 121 - Copying Memory Card Still Images to a Cassette; Locate the point on the cassette where you want to start copying
121 E Using a Memory Card (MV4i MC only) Copying Memory Card Still Images to a Cassette -MV4i MC only- MIX/SLIDE SHOW INEX SCREEN Make sure a memory card that has images recorded on it and a cassette that hasenough recordable space have been inserted into the camcorder. 1. Locate the point on the ca...
Page 122 - Formatting a Memory Card; with the camcorder, not a PC or other device.
122 E Using a Memory Card (MV4i MC only) Formatting a Memory Card -MV4i MC only- Format new memory cards, if you get the message CARD ERROR, or topermanently and quickly erase all the images on a memory card, includingprotected images (this includes the pre-recorded card mix sample images). The SD M...
Page 123 - Other Information and Precautions; on most types of laptop PCs.; Memory card operating precautions
123 E Using a Memory Card (MV4i MC only) Other Information and Precautions The camcorder formats memory cards in DCF (Design rule for Camera Filesystem).Images recorded on a memory card with this camcorder can be transferred to aPC with the use of the following products made for SD Memory Cards orMu...
Page 124 - Sample images
124 E Using a Memory Card (MV4i MC only) • Do not use memory cards in places subject to strong magnetic fields.• Do not disassemble memory cards.• Do not bend or drop memory cards, or expose them to strong vibrations or external shocks. • Do not get memory cards wet. • Do not remove the memory card’...
Page 125 - Card luminance key; SD Memory Card standard
125 E Using a Memory Card (MV4i MC only) Card luminance key Camera chroma key SD Memory Card Specifications Capacity 8 MB Interface SD Memory Card standard Operating temperature range 0°C – 40°C (32°F– 140°F) Dimensions 32 × 24 × 2.1 mm Weight 2 g Weight and dimensions are approximate.Errors and omi...
Page 126 - Preparing the Camera; Adjust the viewfinder
126 E Additional Information Preparing the Camera • Turn the POWER dial to MOVIE mode. Extend the viewfinder straight out, thenadjust the viewfinder focusing lever tosuit your eyesight. • The viewfinder extends straight out for comfortable viewing. Store the camerawith the viewfinder flush with the ...
Page 127 - Notes on Using the Batteries; Charging and recording times; How much power is left?
127 E Additional Information Notes on Using the Batteries Charging and recording times Battery pack BP-406 BP-412 BP-422 (optional) (optional) Time needed for 45 min. 1 hr. 1 hr. 25 min. full rechargeMaximum Using the viewfinder: 55 min. 1 hr. 40 min. 3 hr. 20 min. recording time Using the LCD scree...
Page 128 - Taking care of the battery pack; Always attach the terminal cover.; • Do not allow any metal objects to; Keep the terminals clean.; When to recharge
128 E Additional Information Taking care of the battery pack Always attach the terminal cover. • Do not allow any metal objects to touch the terminals, as this can causea short circuit and damage the batterypack. Attach the terminal coverwhenever the battery pack is notbeing used. Keep the terminals...
Page 129 - Treat the battery pack with care.; Installing the backup battery; mark flashes in the
129 E Additional Information DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode).• Do not expose the battery pack to temperatures greater than 60°C (140°F). Do not leave it near a heater, or inside a car in hot weather, for example. • Do not try to disassemble or...
Page 130 - Maintenance; form on the lens and internal parts (; Cautions
130 E Additional Information Maintenance Avoid high temperatures and high humidity. • Do not leave the camera inside a car in hot weather, for example.• Be careful of heat radiating from video lighting equipment.• Do not take the camera into a humid room. Avoid sudden changes in temperature. • If yo...
Page 131 - Viewfinder; • Clean the viewfinder screen using a; LCD; treated cloth or volatile solvents such as paint thinner.
131 E Additional Information Viewfinder • Clean the viewfinder screen using a cotton swab. First, pull the viewfinderout until it stops. Then, press and holdthe finder release button with a sharpobject and pull the viewfinder all theway out. To reattach the viewfinder, firstposition the base horizon...
Page 132 - Power sources; Using the camera abroad; Video heads; • When mosaic-like noise appears on the playback picture,
132 E Additional Information Power sources • You can use the compact power adapter to operate your camera and charge battery packs in any country where the electricity supply is between 100 and240 V AC, 50/60 Hz. Contact your Canon dealer for information about plugadapters for overseas use. TV playb...
Page 133 - Condensation; Protecting the camera from condensation; When the camera is left in a humid room
133 E Additional Information Condensation Condensation may form on the camera when it is moved from a cold place to awarm place. Using the camera while condensation is present can damage both thetape and the camera. Condensation may become a problem: When the camera is taken from an air-conditioned ...
Page 134 - Troubleshooting; Cause and/or what to do about it
134 E Additional Information Troubleshooting Refer to this checklist first if you have any problems with your camcorder.Possible explanations are given for each problem on the list — turn to the pagenumbers in parentheses for more information. Make sure that the camera is properly connected if you a...
Page 135 - Problem
135 E Additional Information Problem ? Some/all of the digital effectsdon’t work. ? The e e (play) button doesn’t work. ? There’s a bright stripe on thescreen. • Some subjects are not suitable for autofocus. In these situations, you will often get better results using manual focus ( 72). Focus on so...
Page 136 - Memory card operations MV4i MC only
136 E Additional Information • The video heads need cleaning ( 131). • The video heads need cleaning ( 131). • The TV/VIDEO selector on the TV isn’t set to VIDEO ( 27). • The speaker has been turned off with the SELECT dial ( 26). • Headphones are being used. ? The playback picture is rough(with mos...
Page 137 - Miscellaneous
137 E Additional Information Miscellaneous Cause and/or what to do about it • The remote sensor mode is set to OFF B in the menu ( 44). • The remote sensor modes of the wireless controller and the cameraitself are different ( 44). • The batteries are dead or not inserted. • Check the screen displays...
Page 139 - Optional Accessories; BP-400 Series Battery Packs; Using LCD screen
139 E Additional Information Optional Accessories BP-400 Series Battery Packs Extra batteries for use with the MV4/MV4i/MV4i MC. BP-422 BP-406 CH-910 Dual Battery Charger/Holder This holds two battery packs and cancharge them both consectively.It can then be connected directly to theMV4/MV4i/MV4i MC...
Page 140 - Zoom Remote Controller ZR-1000; terminal of a Canon camcorder, it; CB-400 Car Battery Adapter; • Charge the BP-900 Series battery packs
140 E Additional Information SA-1 Adapter Bracket Attaches a video light or microphonesecurely to the camera. Zoom Remote Controller ZR-1000 When this product is plugged into theLANC m terminal of a Canon camcorder, it is possible to control functions such as thestart and stop of recording and the z...
Page 141 - CD-300 Digital Printer
141 E Additional Information This mark identifies genuine Canon video accessories. When youuse Canon video equipment, we recommend Canon-brandaccessories or products bearing the same mark. C A N ON GEN U IN E V ID E O AC CE SS O R Y SC-1000 Soft Carrying Case A handy camera bag with paddedcompartmen...
Page 142 - Screen Displays; Turning off the LCD screen displays; the displays do not disappear when displaying an index screen.; For instructions on how to hook the camera up to your TV, see p. 27.
142 E Additional Information Screen Displays To display the date and time, press theDATA CODE button. See also p. 75. Press the wireless controller’s TVSCREEN button or turn TV SCREENon through the menu to see the otherdisplays on the TV screen. (Thedisplays appear white on-screen.) Theywill not be ...
Page 145 - Standard
145 E Additional Information DV IN Mix balance ( 95) DV input ( 82, 106) (MV4i andMV4i MC only) Condensation warning( 133) Memory Card Displays (MV4i MC only) No memory card isinserted ( 99) Image quality ( 99) Standard Fine Image resolution ( 100) Folder number-Filenumber ( 101) Slide show inprogre...
Page 146 - and 5 images; Recording reminder
146 E Additional Information The number of stillimages that can stillbe recorded on thememory card ( 101) (Green: 6 or more images. Yellow: Between 1 and 5 images Red: No more images) Accessing a memorycard ( 98) Current stillimage/Total numberof still images on thememory card ( 104) Protect mark ( ...
Page 147 - Caution phrases
147 E Additional Information Appears as a warningto protect the tape andalso whencondensation isdetected. Remove thetape as soon aspossible after thecamera has displayedthe caution. Refer to p.83 Refer to p.83 Appears when you tryto do audio dubbingor A/V insert (MV4iand MV4i MC only)on a tape recor...
Page 148 - For MV4i MC only; flashes
148 E Additional Information Appears if you havetried to mark 51 ormore images forprinting, or if a markfile cannot be edited.( 113) A memory card hasnot been insertedinto the camcorder.( 99) There are no imagesrecorded on thememory card. You are using an SDMemory Card and itis set for erasure preve...
Page 149 - Specifications; Maximum recording time (with an 80
149 E Additional Information Specifications MV4/MV4i/MV4i MC Power Supply (rated): 7.4 V DC Power Consumption (while recording with the AF turned on): 4.4 W (Using viewfinder), 5.4 W (Using LCD screen) Television system: CCIR standard (625 lines, 50 fields)PAL colour signal Video recording system: 3...
Page 150 - Operating temperature range:; Rechargeable lithium ion; Operating temperature:
150 E Additional Information Operating temperature range: 0°–40 ° C (32°–104 ° F) Dimensions: 48 × 106 × 86 mm (1 7 / 8 × 4 1 / 8 × 3 3 / 8 in) Weight: 390 g (13 3 / 4 oz) Battery type: Rechargeable lithium ion battery Rated voltage: 7.4 V DC Operating temperature: 0°–40°C (32°–104°F) Battery capaci...
Page 151 - Index; Copying from Memory Card to
151 E Additional Information Index 16:9, 17 Å Abroad, Using the Camera, 132Accessories, 4, 139Adapter, AC, 9, 11AE Programs, 53Analog line-in, 84Art, 60Audio Dubbing, 89Audio Mix, 95Audio Mode, 65Audio Output, 96Audio Recording and Playback, 26, 65 Audio/Video Terminal, 30Auto, 55Autofocus, 72A/V In...
Page 152 - Optional Accessories, 139
152 E Additional Information Ò LANC, 80LCD Screen, 20Lens Cap, 126Loading Cassettes, 12Lock lever, 7, 18Low Light, 56LP Mode, 16 ˜ Maintenance, 130Making Better Videos, 31Manual Exposure Control, 69Manual Focus, 72Memory Card Introduction*, 98Menus, 34Microphone, 65, 89, 92Monitor Recording, 22Mosai...
Page 154 - Menu at a Glance; Function
154 E Additional Information * MV4i MC only Menu at a Glance Use the list below to quickly navigate the camera’s menu. Functions are listedalphabetically. 16:9 effect 6-sec. Date Audio Mode Beep Brightness Card mix* Copy- card to cassette* Copy- cassette to card* Data code Date/time display Date/tim...
Page 156 - DIGITAL VIDEO CAMCORDER; Instruction Manual; PAL
0024W503PUB.DIE-165 © CANON INC. 2001 PRINTED IN JAPAN XX00A/ABXXXX DY8-9020-100-000 IMPRIME AU JAPON CANON INC. Canon Europa N.V. P.O. Box 2262, 1180 EG Amstelveen, the Netherlands Canon UK Ltd. Ribcon WayLuton Bedfordshire LU4 9URTelephone 0870-241-2161 Canon Australia Pty. Ltd 1 Thomas Holt Drive...