Canon MF8380CDW Manual - Free PDF Download

Page 4 - Before adding the machine to a wireless LAN

Before adding the machine to a wireless LAN << Previous Next >> Check to make sure that the setup of the computer and wireless LAN or access point are complete. If they are not set up, you will not be able to use the machine on the wireless LAN network even if you perform the steps outli...

Page 7 - Turn the machine OFF/ON when the following screen disappears.

<< Previous Next >> 7 Switching the connection Method to Wireless LAN 5. Turn the machine OFF/ON when the following screen disappears. It is necessary to turn the machine OFF/ON to activate the settings.Turn OFF the machine and wait for at least 10 seconds before turning it back ON. MF83...

Page 8 - Configuring with WPS Features (Recommended Method); Configuring Manually

<< Previous Next >> 8 Selecting a method for connecting to the wireless LAN Two methods are provided for connecting to the wireless LAN or access point, connecting using WPS (Wi-Fi Protected Setup) function or connecting manually.Select the appropriate setting method after checking the f...

Page 9 - Configuring with WPS Features; Is there a; WPS button; YES

<< Previous Next >> 9 Configuring with WPS Features Is there a WPS button ? No YES Set the machine’s PIN code using “WPS PIN Code Mode” that is entered manually from the computer to the wireless LAN router or access point. Click Here Connect using “WPS Push Button Mode.” Click Here

Page 15 - Configuring with WPS Features (Pin Code Mode)

Configuring with WPS Features (Pin Code Mode) 15 << Previous Next >> Enter the PIN code generated by the imageCLASS device to wireless LAN routers and/or access points for connection. 1. Press [ ] (Menu). 2. Select <Network Settings> using [ ] or [ ], and then press [OK]. 3. Select...

Page 20 - Select Access Point; Manual Entry

20 Configuring Manually If your wireless LAN routers and/or access points do not support WPS, enter the wireless LAN router and/or access point information to the machine for connection. Select Access Point From the list of access points searched by the machine, select a wireless LAN router or an ac...

Page 21 - Preparing

21 Configuring Manually << Previous Next >> Preparing The following information is required.Check your wireless LAN routers and/or access points, and make a note of the information labeled on the bottom. * See the manual provided with your wireless LAN routers and/or access points, or co...

Page 22 - Configuring Manually (Required Information); Access Point Name/Network Name; Type of Encryption (Only when Manually Entering SSID)

22 Configuring Manually (Required Information) Access Point Name/Network Name * It may be labeled as “SSID.” It is the distinguished name for specifying a particular access point.It is used for selecting an access point. Network Key *It is also called encryption key, WEP key, WPA/WPA2 passphrase, PS...

Page 23 - Insert the User Software CD-ROM into the slot on your computer.

23 Configuring Manually (Using the Wireless Setup Assistant) Checking the SSID or Network Key of the Wireless LAN Router/Access Point If the SSID and network key are not indicated on the body of the wireless LAN router or access point or if you are not sure because they are changed, you can check us...

Page 28 - Configuring Manually (Selecting Access Points)

28 Configuring Manually (Selecting Access Points) From the list of access points searched by the imageCLASS device, select a wireless LAN router or an access point to be connected and enter a network key for connection. Selecting Access PointFor selecting access points, WEP 802.11 authentication sys...

Page 33 - Enter the network key that you have written down.

33 Configuring Manually (Selecting Access Points) 9. Enter the network key that you have written down. ASCII text 1. Press [ ] (Tone), and the select <Entry Mode>.2. Enter the network key. Enter it using the numeric keys.3. Select <Apply> using [ ] or [ ], and then press [OK]. Hexadecima...

Page 37 - Configuring Manually (Manually Entering SSID)

37 Configuring Manually (Manually Entering SSID) 1. Press [ ] (Menu). 2. Select <Network Settings> using [ ] or [ ], and then press [OK]. << Previous Next >> 3. Select <Wireless LAN Settings> using [ ] or [ ], and then press [OK]. 4. Press [OK].

Page 38 - Enter the SSID that you have written down.

38 Configuring Manually (Manually Entering SSID) 5. Select <SSID Settings> using [ ] or [ ], and then press [OK]. << Previous Next >> 6. Select <Manual Settings> using [ ] or [ ], and then press [OK]. 7. Enter the SSID that you have written down. After entering it using the n...

Page 41 - Select the entry format that matches the number of network key

41 Configuring Manually (Manually Entering SSID) << Previous Next >> 10. Select the entry format that matches the number of network key characters (digits) that you have written down, using [ ] or [ ]then press [OK]. Either of the following screens is displayed.

Page 42 - Enter the network key that you have written down earlier

42 Configuring Manually (Manually Entering SSID) << Previous Next >> 11. Enter the network key that you have written down earlier ASCII text 1. Press [ ](Tone), and then select <Entry Mode>.2. Enter the network key, using the numeric keys.3. After entering, select <Apply> usi...

Page 46 - You have successfully added your Canon imageCLASS device to your

46 Congratulations! << Previous Next >> You have successfully added your Canon imageCLASS device to your wireless network.