Page 3 - Before adding the machine to a wireless LAN
Before adding the machine to a wireless LAN << Previous Next >> Check to make sure that the setup of the computer and wireless LAN or access point are complete. If they are not set up, you will not be able to use the machine on the wireless LAN network even if you perform the following s...
Page 4 - Connection procedure
Connection procedure << Previous Next >> 4 Once you have finished checking, connect the machine to the wireless LAN The diagram below shows the primary steps in connecting your imageCLASS device to the wireless LAN.
Page 7 - Turn the machine OFF/ON when the following screen disappears.
<< Previous Next >> 7 Switching the connection Method to Wireless LAN 5. Turn the machine OFF/ON when the following screen disappears. It is necessary to turn the machine OFF/ON to activate the settings.Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
Page 8 - Configuring with WPS Features(Recommended Method); Configuring Manually
Configuring with WPS Features(Recommended Method) Check whether the box or body of the wireless LAN router or access points that you are using supports the WPS function.As an example, a symbol such as show below can be seen on the shipping box or machine. This supports WPS (Wi-Fi Protected Setup).If...
Page 9 - Configuring with WPS Features; Is there a WPS button?; YES
<< Previous Next >> 9 Configuring with WPS Features Is there a WPS button? No YES Set the machine’s PIN code using “WPS PIN Code Mode” that is entered manually from the computer to the wireless LAN router or access point. Click Here Connect using “WPS Push Button Mode.” Click Here
Page 15 - Configuring with WPS Features (Pin Code Mode)
Configuring with WPS Features (Pin Code Mode) 15 << Previous Next >> Enter the PIN code generated by the machine to wireless LAN routers and/or access points for connection. 1. Press [ ] (Menu). 2. Press [ ] or [ ] to select <Network Settings>, and then press [OK]. 3. Press[ ] or [...
Page 21 - Preparing
21 Configuring Manually Preparing The following information is required.Check your wireless LAN routers and/or access points, and make a note of the information labeled on the bottom. * See the manual provided with your wireless LAN routers and/or access points, or contact the manufacturer for where...
Page 22 - Configuring Manually (Required Information); Access Point Name/Network Name
22 Configuring Manually (Required Information) Access Point Name/Network Name * It may be labeled as “SSID.” It is the distinguished name for specifying a particular access point.It is used for selecting an access point. Network Key *It is also called encryption key, WEP key, WPA/WPA2 passphrase, PS...
Page 23 - Insert the User Software CD-ROM into the slot on your computer.
23 Configuring Manually (Using the Wireless Setup Assistant) Checking the SSID or Network Key of the Wireless LAN Router/Access Point If the SSID and network key are not indicated on the body of the wireless LAN router or access point or if you are not sure because they are changed, you can check us...
Page 28 - Configuring Manually (Selecting Access Points)
28 Configuring Manually (Selecting Access Points) From the list of access points searched by the machine, select a wireless LAN router or an access point to be connected and enter a network key for connection. Selecting Access PointFor selecting access points, WEP 802.11 authentication system is set...
Page 33 - Enter the network key that you have written down.
33 Configuring Manually (Selecting Access Points) 9. Enter the network key that you have written down. ASCII text 1. Press [ ] (Tone), and the select <Entry Mode>.2. Enter the network key. Enter it using the numeric keys.3. Press [ ] or [ ] to select <Apply>, and then press [OK]. Hexadec...
Page 37 - Configuring Manually (Manually Entering SSID)
37 Configuring Manually (Manually Entering SSID) 1. Press [ ] (Menu). 2. Press [ ] or [ ] to select <Network Settings>, and then press [OK]. << Previous Next >> 3. Press [ ] or [ ] to select <Wireless LAN Settings>, and then press [OK]. 4. Press [OK].
Page 38 - Enter the SSID that you have written down.
38 Configuring Manually (Manually Entering SSID) 5. Press [ ] or [ ]to select <SSID Settings>, and then press [OK]. << Previous Next >> 6. Press [ ] or [ ] to select <Manual Settings>, and then press [OK]. 7. Enter the SSID that you have written down. After entering it using ...
Page 42 - Enter the network key that you have written down.
42 Configuring Manually (Manually Entering SSID) << Previous Next >> 11. Enter the network key that you have written down. ASCII text 1. Press [ ](Tone), and then select <Entry Mode>.2. Enter the network key, using the numeric keys.3. After entering, press [ ] or [ ] to select <...
Page 47 - Checking IP Address Settings; Checking IPv4 address settings
47 Checking IP Address Settings << Previous Next >> 1. Press [ ] (Status Monitor/Cancel). Follow the steps below to confirm the IP address set on the machine. Write down the IP address as you may need it when installing the software. Checking IPv4 address settings 2. Press [ ] or [ ] to ...
Page 49 - Installing the MF Drivers and MF Toolbox; Insert the User Software CD-ROM into the slot on your computer.
49 Installing the MF Drivers and MF Toolbox << Previous Next >> *When you are in an IPv6 environment, you may not be able to use the installation procedure below to install the MF drivers.See “Installing the MF Drivers on the WSD Network” to install the MF Drivers. *Note that you cannot ...
Page 51 - a computer via Network.
51 Installing the MF Drivers and MF Toolbox << Previous Next >> 3. When the following screen appears, select [Next] for [Connect Printer to a computer via Network.
Page 61 - You have successfully added your Canon imageCLASS device to your
61 Congratulations! << Previous Next >> You have successfully added your Canon imageCLASS device to your wireless network.