Page 2 - Features and Design
2 Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ♦ Compact Design Th...
Page 3 - Table of Contents; Trademarks
3 Table of Contents Trademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design . . . . . . . . . . . . . . 2 Table of Contents . . . . . . . . . . . . . . . . . 3 To the Owner . . . . . . . . . . . ...
Page 4 - To the Owner; RISK OF ELECTRIC SHOCK; Safety Precaution; bECOME DETERIORATED .
4 To the Owner CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN ...
Page 6 - Safety Instructions
6 Safety Instructions Immediately turn the power off, unplug the projector, and contact your dealer under the following conditions, otherwise a fire or an electric shock may result. – If smoke comes out from it. – If it emits a strange odor, or makes a strange noise. – If lamp goes out with a loud b...
Page 7 - Precaution During Use
Safety Instructions 7 Safety Instructions – Remove the batteries when they have been exhausted or not in use for an extended period of time. – Be sure to replace both batteries at the same time. Do not mix batteries of different types. – Insert batteries correctly according to the “+” and “-“ markin...
Page 8 - Moving the Projector; CAUTION IN CARRYING OR; Installing the Projector in Proper; CAUTION
8 Safety Instructions Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the f...
Page 9 - Compliance; AC Power Cord for the United States and Canada:; AC POWER CORD REQUIREMENT; Federal Communications Commission Notice; Canadian Radio Interference Regulations; This Class B digital apparatus complies with Canadian ICES-003.
Safety Instructions 9 Compliance The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certif...
Page 10 - Part Names and Functions
10 Part Names and Functions Back Bottom ⑭ ⑦ ⑩ ⑨ ⑥ ⑪ ⑬ ⑫ ⑧ ⑮ ① Infrared Remote Receiver ② Zoom Ring ③ Focus Ring ④ Projection Lens CAUTION Do not cover the light beam in front of the lens. High temperature from light beam may damage the lens. ⑤ Lens Cap (See page 64 for attaching.) ⑥ Speaker ⑦ Exha...
Page 11 - Rear Terminal
11 Part Names and Functions Rear Terminal ③ ④ ① ⑤ ⑥ ⑪ ⑦ ⑨ ⑧ ⑩ ⑥ S-VIDEO IN Connect the S-VIDEO output signal from video equipment to this jack (p.17). ⑧ AUDIO IN Connect the audio output signal from video equipment connected to ⑥ or ⑨ to this jack. For a mono audio signal (a single audio jack), conn...
Page 12 - Top Control
12 Part Names and Functions Top Control ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑨ LAMP REPLACE indicator Lights yellow when the projection lamp reaches its end of life (pp.65, 72). ⑧ WARNING indicator – Lights red when the projector detects an abnormal condition. – Blinks red when the internal temperature of the projecto...
Page 13 - Remote controller
Part Names and Functions 13 Part Names and Functions Note: To ensure safe operation, please observe the following precautions: – Do not bend, drop or expose the remote controller to moisture or heat. – For cleaning, use a soft dry cloth. Do not apply benzene, thinner, spray, or any chemical materi...
Page 14 - Two AAA size; Remote controller Operating Range; MENU button; WARNING
14 Part Names and Functions To ensure safe operation, please observe the following precautions : ● Use two (2) AAA type batteries. ● Always replace batteries in sets. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the remote controller to moistu...
Page 15 - Positioning the Projector; Installation; Adjustable Feet
Part Names and Functions 15 Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. Installation Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambie...
Page 16 - Connecting to a Computer; Cables used for connection; • Audio Cables
16 Installation Connecting to a Computer Cables used for connection • VGA Cables (Mini D-sub 15 pin) * • Audio Cables • HDMI-DVI cable (*One cable is supplied; other cables are not supplied with the projector.) Note: • When the MIC function is set to Off in the Sound menu, the MIC function is disa...
Page 17 - Connecting to VIDEO Equipment; • Audio Cable
Installation 17 Installation Connecting to VIDEO Equipment Cables used for connection • Video and Audio Cable (RCA x 3) • S-VIDEO Cable • Audio Cable • HDMI Cable (Cables are not supplied with the projector. ) Note: When the AUDIO OUT is plugged-in, the projector's built-in speaker is not availabl...
Page 18 - Connecting to COMPONENT
18 Installation Connecting to COMPONENT VIDEO and SCART Equipment Note: • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • See page 76 for ordering optional cables. External Audio Equipment COMPUTER AUDIO IN 1 Audio cable (stereo) Audio cable (stereo) Audio In...
Page 19 - Connecting the AC Power Cord; NOTE ON THE POWER CORD
Installation 19 Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100-240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical sh...
Page 20 - Turning On the Projector; Selected Input Source and Lamp mode; Basic Operation; Video Selection
20 The preparation display will disappear after 30 seconds. (See page 56 for Lamp mode status.) Turning On the Projector Connect the projector’s AC power cord into an AC outlet. The POWER indicator lights red. Open the lens cap.Press the POWER button on the top control or on the remote controller. T...
Page 21 - Enter a PIN code; PIN code
21 Basic Operation What is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector. A PIN code consists of a four-digit number. Refer to the PIN code lock functi...
Page 22 - Turning Off the Projector; Direct Power Off Function
22 Basic Operation TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROjECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF . Power off? disappears after 4 seconds. Turning Off the Projector Press the POWER button on the top control or on the remote controller, and Power off? appears on th...
Page 23 - How to Operate the On-Screen Menu
Basic Operation 23 Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting pr...
Page 24 - Main Menu
24 Basic Operation Main Menu For detailed functions of each menu, see “Menu Tree” on pages 70-72. Main Menu ③ Image select For both of computer and Video sources, used to select an image mode from among Presentation , Standard , High contrast , Cinema, Blackboard(Green) , Colorboard and User 1-4 . (...
Page 25 - Zoom and Focus Adjustment; Auto Setup Function
Basic Operation 25 Basic Operation Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. Zoom and Focus Adjustment If a projected picture still has keystone distortion after pressing the AUTO SET button, correct the image manually as follows: Press the KEYS...
Page 26 - Menu Operation; Direct Operation; Sound Adjustment
26 Basic Operation 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Sound . Press the Point ► button or the OK button to access the submenu items. Press the VOLUME+/– buttons on the top control or on the remote controller to adjust the volume. The volume di...
Page 27 - Remote controller Operation; Language
Basic Operation 27 Basic Operation Remote controller Operation Using the remote controller for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the COMPUTER 1/2, HDMI, VIDEO, ...
Page 28 - User
28 Basic Operation BLANK button Press the P-TIMER button on the remote controller to operate the Count up/Count down function. Refer to p.54 for detail of Setting for the P-timer function. To stop the count time, press the P-TIMER button. To cancel the P-timer function, press and hold the P-TIMER bu...
Page 29 - COMPUTER 1; Computer Input; OR; COMPUTER 2
Basic Operation 29 Choose either COMPUTER 1 (ANALOG PC) or COMPUTER 2 (ANALOG PC) by pressing the COMPUTER 1 or COMPUTER 2 button on the remote controller. Or you can press the INPUT button on the top control to choose the desired input source. Before using these buttons, correct input source should...
Page 30 - Computer System Selection; Selecting Computer System Manually
30 Computer Input PC System Menu PC System Menu Computer System Selection This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes...
Page 31 - Auto PC Adjustment
Computer Input 31 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync , Total dots , Horizontal position and Vertical position to conform to your computer. PC adjust Menu Auto PC Adjustment To store adjustment parameters The adjusted parameters from the Auto PC A...
Page 32 - Manual PC Adjustment
32 Computer Input PC adjust Menu Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent me...
Page 33 - Reset
Computer Input 33 Computer Input Store To store the adjusted data, select Store and then press the Point ► button or the OK button. Move the highlight to one of the Mode 1 to 10 in which you want to store, and then press the OK button. Mode free To clear the stored data, select Mode free and then pr...
Page 34 - Image Mode Selection
34 Computer Input Image select Menu IMAGE button Presentation High contrast User 1 User 2 User 3 Image Mode Selection User 4 Blackboard(Green) Standard Remote controller IMAGE button Select the desired image mode among Presentation , Standard , High contrast , Cinema , Blackboard (Green) , Colorboar...
Page 35 - Image Adjustment; Mid
Computer Input 35 Computer Input Image Adjust Menu Image Adjustment Reset Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► button or the OK button. 1 2 Use the Point ▲▼ buttons to select the desired item and then press th...
Page 36 - Aspect Setting; True; Normal
36 Computer Input Aspect Setting Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Aspect and then press the Point ► button or the OK button. Use the Point ▲▼ buttons to select the desired item and then press the OK button. This projector has the picture screen ...
Page 38 - VIDEO Input; Input Source Selection (VIDEO
38 VIDEO Input Choose VIDEO or S-VIDEO by pressing the INPUT button on the top control, or the VIDEO or the S-VIDEO button on the remote controller. Before using these buttons, correct input source should be selected through menu operation as described below. 1 2 VIDEO Input Source Selection (VIDEO ...
Page 39 - Input Menu; Input Source Selection (COMPONENT; HDMI
39 VIDEO Input VIDEO Input Choose COMPUTER 1(COMPONENT) or COMPUTER 1 (SCART) by pressing the COMPONENT or the COMPUTER 1 button on the remote controller. Choose HDMI by pressing the HDMI button on the remote controller or you can press the INPUT button on the top control to choose the desired input...
Page 40 - VIDEO System Selection; PAL; VIDEO
40 VIDEO Input VIDEO System Selection 1 AV System Menu (VIDEO or S-VIDEO) AV System Menu (COMPONENT) 2 If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL , SECAM , NTSC , NTSC 4.43 , PAL-M and PAL-N . PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N The...
Page 44 - Aspect Menu; Full
44 VIDEO Input Aspect Setting This projector has the picture screen resize function, which enables you to customize the image size. Normal Aspect Menu 1 2 Provide the image to fit the screen size while maintaining the aspect ratio of the input signal. Custom adj. Note: • When no signal is detected...
Page 46 - Setting Menu; Setting
46 Setting Setting Menu Press the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ► button or the OK button to access the submenu items. 1 2 Use the Point ▲▼ buttons to select the desired item and then press the Point ► button or the OK but...
Page 50 - Current
50 Setting Enter a Logo PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ◄► buttons to fix the number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point ◄► buttons to move the pointer to the number you want to...
Page 52 - P in P
52 Setting Picture in Picture Picture in Picture Select the Picture in Pictrue mode among P in P , P by P and Off . Mode P in P: Provide the images of Main picture and Sub picture at the ratio of Screen aspect in the Screen Menu. P by P: Provide the images of Main picture and Sub picture at the rati...
Page 54 - Restart
54 Setting Standby mode This function is available when operating the projector via network. Network .. Supply the power to the network function even after turning off the projector by pressing the POWER button on the remote controller. You can turn on/off the projector via network, modify network e...
Page 55 - Closed caption
Setting 55 Setting Closed caption Closed caption Closed caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼ buttons to select Off , CC1 , ...
Page 58 - Fan
58 Setting Use the Point ▲▼ buttons to select Off , On 1 or On 2 , and then press the OK button to make a choice. Change the PIN code lock setting Enter a PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ◄ ► buttons to fix the number and move the red frame pointer to the next box...
Page 59 - Filter
Setting 59 Setting Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector. Off ................ Normal speed. Set this function to Off when using the projector in non- high altitude environment. On 1 ............. Faste...
Page 61 - Input Source Information Display; Information
Setting 61 Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. H-sync freq. V-sync freq. Lamp counter Information Menu The horizontal frequency of the input signal is displayed in KHz , or - - -...
Page 62 - WARNING indicator; Maintenance and Cleaning
62 The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. WARNING indicator The projector is shut down and the WARNING indicator is blinking red. When the temperature inside the ...
Page 63 - Resetting the Filter Counter; Filter counter reset; Replacing the Filters
63 Maintenance and Cleaning Maintenance and Cleaning RECOMMENDATION We recommend avoiding dusty/smoky environments when you operate the projector. Usage in these environments may cause poor image quality. When using the projector under dusty or smoky conditions, dust may accumulate on a lens, LCD pa...
Page 64 - Cleaning the Projector Cabinet
64 Maintenance and Cleaning Cleaning the Projector Cabinet Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non- abrasive camera lens cleaner, or use a lens cleaning paper or commercially avai...
Page 65 - Lamp Replacement
Maintenance and Cleaning 65 Maintenance and Cleaning When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator shoul...
Page 66 - the projector has cooled down.; IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE; caused by pieces of broken glass.; LAMP HANDLING PRECAUTIONS; ORDER REPLACEMENT LAMP
66 Maintenance and Cleaning This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of th...
Page 67 - Appendix; Troubleshooting
Maintenance and Cleaning 67 Problem: – Solutions No power – Plug the power cord of the projector into the AC outlet. – See if the POWER indicator lights red. – Wait until the POWER indicator stops blinking to turn on the projector again. The projector can be turned on after the POWER indicator turns...
Page 70 - Menu Tree
70 Appendix Menu Tree Computer Input/HDMI/ Input/VIDEO Input Volume Mute On/Off Sound 0-63 ANALOG PC COMPONENT ANALOG PC SCART Input VIDEO COMPUTER 1 COMPUTER 2 MIC On/Off MIC GAIN 0-63 STANDBY MIC OUT On/Off Presentation Cinema Blackboard (Green) User 1 Image select Standard Colorboard Red/Blue/Yel...
Page 71 - HDMI Input/VIDEO Input
Appendix 71 Appendix HDMI Input/VIDEO Input Auto 1080i 1035i 720p 575p 480p 575i 480i 0–63 0–63 Off System (2) Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N System (3) Image Adjust Contrast Brightness Color Tint Red Green Blue Sharpness Reset Store Gamma Progressive 0–63 0–63 0–63 0–15 0–15 User 1 Yes/N...
Page 72 - Projector Condition; green; Indicators; yellow; Indicators and Projector Condition
72 Appendix Check the indicators for projector condition. • • • green • • • red • • • off • • • blinks green. When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. (p. 65) ...
Page 73 - Compatible Computer Specifications; The specifications are subject to change without notice.
Appendix 73 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. ON-SCREEN DISPLAY RESOLUTION H-Freq. (KHz) ...
Page 74 - • The specifications are subject to change without notice.
74 Appendix Note: • The specifications are subject to change without notice. • Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings. • When you project a DVI signal, connect the cables, turn the projector on, then se...
Page 75 - Technical Specifications
Appendix 75 Appendix Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 13.78" x 3.52" x 10.90" (350.0 mm X 97.0 mm X 276.9 mm ) (Not including protrusions) Net Weight 7.51 lbs (3.4 kg) Feet Adjustment 0˚ to 12˚ Panel Resolution LC...
Page 76 - Remote Controller; Accessories; Optional Parts
76 Appendix Model No. COMPONENT-VGA Cable : LV-CA32 Remote Controller : LV-RC04 Projector Attachment : LV-CL16 Ceiling Attachment : LV-CL18 High Ceiling Attachment : LV-CL19 The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales d...
Page 77 - Pj Link Notice; To Ceiling Mount
Appendix 77 Appendix This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password...
Page 78 - COMPUTER IN 1 / COMPONENT IN; Configurations of Terminals; LAN TERMINAL
78 Appendix COMPUTER IN 1 / COMPONENT IN Terminal: Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of Terminals Red/Cr Input Ground (Horiz.sync.) Green/Y Input ----- Blue/Cb Input Ground (Red)Ground (Green)Ground (Blue) 1 5 2 4 3 678 +5V Power Horiz. sync. Input/Out...
Page 79 - PIN Code Protection
Appendix 79 Appendix PIN Code Protection Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code. While the projector is locked with the PIN code. o : Picture in Picture combinations are enabled. x : Picture in Picture combinations are disabl...
Page 80 - Dimensions
80 Appendix Dimensions Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.47) 67.9 (2.67) 212.4 (8.36) 216.5 (8.52) 350 (13.78) 176.3 (6.94) 79.7 (3.14) 254.4 (10.02) 256.0 (10.08) 91.4 (3.60) 109.7 (4.32) 76.6 (3.01) 99.1 (3.90) 38.8 (1.53) 52.3 (2.006) 48.7 (1.92) 240.0 (9.45) 78...
