Canon G16 - Manual - manualsarea.com

Page 2 - Getting Started; IMPORTANT

Getting Started The procedure for using the Wi-Fi function to send images from a camera to a computer is explained in the following four steps. Proceed in order from Step 1. IMPORTANT The position and shape of the operation buttons, screens displayed, and setting items may differ according to the mo...

Page 3 - Step 1: Preparing necessary items

Step 1: Preparing necessary items 1. Check the computer's requirements. The camera can connect via Wi-Fi to computers running the following operating systems. • Windows: Windows 8, Windows 7 Service Pack 1 • Macintosh: Mac OS X v10.6.8, v10.7, v10.8.2 or later. IMPORTANT • Windows 7 Starter and Home...

Page 9 - Step 3: Connecting the camera to the computer; NOTE

This completes the Wi-Fi setting procedure for the computer. Please proceed to Step 3: Connecting the camera to a computer. Step 3: Connecting the camera to the computer 1. Press the <Playback> ( ) button to turn the camera on. 2. Press the <Wi-Fi> ( ) button. NOTE When setting up Wi-Fi ...

Page 11 - AConnecting to WPS-Compatible Access Points; AConnecting to WPS-Compatible Access Points.

NOTE Once a computer is added, the computer name will be displayed on the screen in 4. To connect to a computer again, simply choose the computer name from the list. 5. A list of detected access points will be displayed in the [Access Point Connect] screen. Use the following method to connect with a...

Page 13 - The camera will connect to the access point.

5A-3. On the access point, hold down the WPS connection button for a few seconds. On the camera, press the < > button. • The camera will connect to the access point. • A list of computers connected to the access point will appear in the [Select a Device] screen. NOTE A WPS connection button is...

Page 15 - B Connecting to Access Points in the List

5B Connecting to Access Points in the List 5B-1. The access point's encryption key is necessary for connection. Refer to the user guide included with your access point to look up information on SSID, Network certificates, and security keys. NOTE • An encryption key (network key) is the key used when...

Page 17 - A screen like the one below will appear.; C Connecting to an access point manually.

A screen like the one below will appear. If you are using Mac or Windows with the drivers installed, the screen will turn off after the connection is terminated. Please proceed to Step 4: Sending images to a computer. For Windows users, when connecting your camera to your computer wirelessly for the...

Page 23 - Double-click the icon to begin driver installation.

7B-1. Windows 8 When the screen in step 7 is shown on the cameras LCD panel, move the computers pointer to the bottom right side of the desktop to display the Charms Bar, and then click [Settings] > [Control Panel] > [Add a Device]. 7B-2. The cameras icon will be displayed in the [Add a device...

Page 24 - Nothing will be displayed on the cameras LCD panel.

7B-3. When the connection between the camera and the computer has been established, a screen like the following will appear. Click [Tap to choose what happens with this device.] Nothing will be displayed on the cameras LCD panel.

Page 25 - Step 4: Sending images to the computer

7B-4. Click [Downloads images from Canon camera]. Step 4: Sending images to the computer

Canon G16 - Manual

Table of Contents:

Summary

Other Canon Models