Canon G1- Manual

Description of the main parts Illustration 1 7 4 10 9 3 2 8 6 5 [1] The main parts of High Capacity Stacker-G1 Main parts Part Description 1 Front door The front door gives access to the registration unit andthe error locations A1-A7. 2 Front cover The front cover gives access to the flip rings and ...

Part Description 9 Eject tray The eject tray receives the stack from the stack tray.Then the eject tray moves horizontally out of the stacker.When the eject tray is outside the stacker, you can re-move the stack. In the meantime, the filling of the stacktray can continue. When you empty the eject tr...

Description of the stacker control panel Illustration A B C D E [2] The items of the stacker control panel Description of the stacker control panel Item Description A Filling level indicator (off, orange or red). B Stack height indicators. C Eject button.The eject button LED can have the following s...

Status Description 1 stack height indicator is lit. The stack traycontains at least 1 sheet. All stack height indicators are lit. The stackheight comes close to the factory default valueof 302 mm (11.9").Stacks with a height of maximum 302 mm(11.9") are always ejected properly. For highersta...

Turn the stacker on The power switch is optional. If the switch is missing, the high capacity stacker is turned onautomatically when the printer is turned on. CAUTION Never plug in the power plug while your hands are wet. Doing so creates the risk of electric shock. Illustration [3] The location of ...

Turn the stacker off The power switch is optional. If the switch is missing, the high capacity stacker is turned offautomatically when the printer is turned off. CAUTION Never unplug the power plug while your hands are wet. Doing so creates the risk of electric shock. Illustration [4] The location o...

Eject a stack manually Eject a stack When you press the eject button on the stack‐er Then 1xThe eject button on the stacker control panelblinks slowly (green). The stack will be ejected on the next possibleset boundary. Then the filling of the stackercontinues.Therefore, the stack will usually conta...

Filling scenarios Filling scenarios Scenario Description Where to define the settings? Filling with defaultsettings The stack tray is filled until thestack reaches the factory defaultheight of 302 mm (11.9"). Thenthe stack is ejected. Next job, next tray Each new job is delivered to anempty stac...

Change the default stacker settings Introduction In the Settings Editor on the PRISMAsync controller, a key operator can define a number ofdefault stacker settings ([Preferences] -> [Print job defaults] - [Stacker]). These settings aredescribed below. Some of these default settings can be overrul...

Setting Description [Maximum stackheight] See the section 'Set the maximum stack height'. Procedure 1. Access the Settings Editor on the PRISMAsync controller. 2. Click [Preferences] - [Print job defaults]. 3. Scroll down to the [Stacker] section. 4. Click the setting you want to change. 5. Change t...

Set the maximum stack height Introduction The maximum stack height is 355 mm (14") or 3,000 sheets A4/LTR (80 g/m² / 20 lb bond).However, to guarantee a safe ejection of the stack, the factory default is set to 302 mm (11.9").Depending on your needs, you can set the maximum stack height to a...

Set the minimum filling level Introduction NOTE The [Minimum filling level] setting is only applied when, on the printer control panel, the [Next output tray] setting is set to [When tray is full] (under [System] -> [Setup] -> [Workflow profile] -> [Output]). Purposes The [Minimum filling l...

Examples of using the [Maximum stack height] and the [Minimum filling level] settings Example 1 - Fill a box Assumption In the Settings Editor, the [Maximum stack height] setting is set to 302 mm (11.9"). In the Settings Editor, the [Minimum filling level] setting is set to 80%. 1 job using plai...

250 mm / 9.8” 250 mm / 9.8” 80% 80% Example 3 - Keep sets together Assumption In the Settings Editor, the [Maximum stack height] setting is set to 302 mm (11.9"). In the Settings Editor, the [Minimum filling level] setting is set to 80%. 1 job with a stack height of 100 mm (3.9"). 4 copies r...

302 mm / 11.9” 302 mm / 11.9” 80% 80% Example 5 - Two jobs exceed the maximum stack height Assumption In the Settings Editor, the [Maximum stack height] setting is set to 302 mm (11.9"). In the Settings Editor, the [Minimum filling level] setting is set to 80%. On the printer operator panel, the...

Error location labels Introduction The stacker has various labels inside that indicate error locations. You can access these locationsto remove error sheets or jammed paper. Illustration A9 A6 A2 A3 A4 A5 A7 A1 [5] Example of a label inside the stacker Error codes and locations Overview of error cod...

Remove an error sheet from the internal error tray (A1) When to do A red LED lights up at the stacker control panel. Illustration [6] Indication at the stacker control panel Remove an error sheet from A1 Step Action Illustration 1 Open the front door. 2 Remove the sheets from the internal errortray ...

Clear a paper jam in the input paper path (A2-A5) When to do A red LED lights up at the stacker control panel. Illustration [7] Indication at the stacker control panel Clear a paper jam at A2-A5 Step Action Illustration 1 Open the front door. 2 Turn A7 to remove jammed paper. CAUTION When you turn t...

Clear a paper jam in the input paper path of the registration unit (A6-A7) When to do A red LED lights up at the stacker control panel. Illustration [8] Indication at the stacker control panel Clear a paper jam at A6-A7 Step Action Illustration 1 Open the front door. 2 Turn A7 to remove the jammed p...

Step Action Illustration 3 Remove the jammed paper from A6. CAUTION If the lower input paper path ofthe registration unit also con‐tains jammed paper, only au‐thorized and trained personsare allowed to remove the jam‐med paper. 4 Close the front door. Clear a paper jam in the input paper path of the...

Clear a paper jam in the paper path (B1) When to do A red LED lights up at the stacker control panel. Illustration [9] Indication at the stacker control panel Clear a paper jam at B1 Step Action Illustration 1 Open the top cover. 2 Open B1 and remove the jammed paper. 4 Clear a paper jam in the pape...

Clear a paper jam at the flip wheel (C1) When to do A red LED lights up at the stacker control panel. Illustration [11] Indication at the stacker control panel Clear a paper jam at C1 Step Action Illustration 1 Open the front cover. 2 Open C1 and remove the jammed paperfrom the flip wheel. 3 Close t...

Use the EasyLift to unload the stacker Introduction The optional EasyLift is a manual device that helps you to remove a stack of paper more easily. NOTE The EasyLift is delivered with a user guide. Refer to the EasyLift user guide for more information. This section contains a brief description for r...

Specifications Item Specification Paper size/weight/type Paper size (Top tray, stack tray, eject tray):A3, B4, A4R, A4, B5R, B5, A5RLGL, LTR, LTRR, STMTR, SRA3, EXEC, EXECR11" x 17", 12" x 18", 13" x 19"Custom sizes: 140 mm x 182 mm - 330.2 mm x 487.7 mm(5.5" x 7.2" -...

Index E Eject a stack manually As soon as possible......................................... 16 At the next set boundary................................. 16 Error sheet A1...................................................................... 30 Internal error tray........................................

CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON LATIN AMERICA, INC....