Canon CB 2LGE - Troubleshooting Guide

A Troubleshooting Guide for Canon cameras focuses on resolving power, performance, and operational issues across various functions. The document addresses common electrical and battery-related problems like charging failures, power-on malfunctions, and rapid drain, while also covering broader camera operations–such as shooting errors (e.g., misaligned image numbering or exposure flaws), flash/lighting inconsistencies, playback artifacts (blurry displays, flickering images), and connectivity challenges (HDMI failures, file naming conflicts). Solutions often involve adjusting settings, checking hardware connections, or verifying compatibility with accessories like memory cards or printers.

Page 1 – Power-Related Troubleshooting
Page 2 – Common Camera Operation and Card Issues
Page 3 – Shooting and Image Quality Corrections
Page 4 – Flash and Lighting Settings Adjustments
Page 5 – Live View and Movie Shooting Problems
Page 6 – Playback and Recording Defects
Page 7 – Connectivity and File Naming Solutions
Page 8 – File Management and Card Functionality

Loading the manual

242

If a problem occurs with the camera, first refer to this Troubleshooting
Guide. If this Troubleshooting Guide does not resolve the problem,
contact your dealer or nearest Canon Service Center.

Do not recharge any battery pack other than a genuine Canon Battery
Pack LP-E10.

If there is a problem with the battery charger, the protective circuit will stop
the charging operation and the charge lamp will blink in orange. If this
happens, disconnect the charger’s power plug from the power outlet and
remove the battery pack. Attach the battery pack to the charger again and
wait a while before connecting the charger to a power outlet again.

Make sure the card/battery compartment cover is closed (p.28).

The battery is not properly installed in the camera (p.28).

Recharge the battery (p.26).

Press the <

> button (p.46).

If the power is turned off while an image is being recorded to the card,
the access lamp will still continue to light/blink for a few seconds.
When the image recording is completed, the power will turn off
automatically.

Use a fully-charged battery pack (p.26).

The rechargeable battery pack performance will degrade over
repeated use. Purchase a new one.

Troubleshooting Guide

Power-Related Problems

The battery pack does not recharge.

The battery charger’s lamp blinks.

The camera does not operate even when the power switch is set to <

The access lamp still blinks even when the power switch is set to <

The battery becomes exhausted quickly.

COP

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: Canon
Model: CB 2LGE
Document type: Troubleshooting Guide
Language(s): English
Pages: 8
File size: 474.8 KB
Format: PDF

Summary

Page 1 - Power-Related Troubleshooting

Troubleshooting power issues including battery recharging failures, charger lamp behavior, camera operation when powered on, access lamp status, and rapid battery drainage.

Page 2 - Common Camera Operation and Card Issues

Solutions for factors reducing shot count, automatic power-off behavior, recording failures, card usage errors, and related solutions.

Page 3 - Shooting and Image Quality Corrections

Resolutions for issues such as incorrect image numbering, out-of-focus images, horizontal stripes or exposure/color tone problems, slow continuous shooting speed, and ISO setting limitations.