Canon C50 - Manual

Canon MultiPASS C50 Getting Started ENGLISH I-5 Attaching the Output Tray Extension (2-13) The ends of the metal support fit into the slots on the output tray, as shown below. To install it, squeeze the ends of the support toward each other, insert them into the slots, and gently release them. Attac...

Canon MultiPASS C50 Getting Started ENGLISH I-6 Connecting the MultiPASS C50 to Your PC (2-14) 1. Make sure the computer is turned off and the MultiPASS C50 is unplugged. 2. Connect the parallel cable to your MultiPASS C50: 3. Open the ferrite core and attach it to the parallel cable near the end cl...

Canon MultiPASS C50 Getting Started ENGLISH I-7 Connecting the Power Cord (2-18) 1. Plug the supplied power cord into the power receptacle on the MultiPASS C50. 2. Plug the other end of the power cord into the outlet. Installing the BJ Cartridge (2-31) 1. Make sure the MultiPASS C50 is plugged in. 2...

Canon MultiPASS C50 Getting Started ENGLISH I-8 5. Peel the protective foil off the new BJ cartridge’s protective packaging, and remove the cartridge. 6. Lift the orange cap off the cartridge’s print head, then remove the orange tape. 7. Hold the cartridge so the label faces outward, tilt it slightl...

Canon MultiPASS C50 Getting Started ENGLISH I-9 Loading Print Media for Manual Feed (2-49) You will need to select manual feed from the print dialog box of your Windows application before printing. (See the MultiPASS Desktop Manager User’s Guide for instructions.) Load the sheet when the dialog box ...

Canon MultiPASS C50 Getting Started ENGLISH I-10 Entering Your Identification Information (2-58) When the C50 is connected to your PC, we recommend that you use the Setup Options dialog box in the Desktop Manager for Windows. Do not make your changes via the operation panel of the C50. C50 data is o...

Canon MultiPASS C50 Getting Started ENGLISH I-11 Installing the Desktop Manager Software If you are attempting to reinstall the Desktop Manager software, you must first uninstall your current installation of the software. For instructions on uninstalling the software, refer to Chapter 8, ”C50 Setup ...

Canon MultiPASS C50 Getting Started ENGLISH I-13 Notes

Canon MultiPASS C50 Getting Started ENGLISH II-1 MultiPASS TM C50 GETTING STARTED ENGLISH II. Quick Reference Guide The following pages have been copied from the MultiPASS C50 User Documentation to get you started. Please use these manuals for full details. The Operation Panel .........................

Canon MultiPASS C50 Getting Started ENGLISH II-2 Getting Acquainted with Your MultiPASS C50 Paper Rest Paper Guide Sheet Feeder Printer Cover Operation Panel Output Tray Paper Output Guides Sending Document Support Automatic Document Feeder(ADF) Document Guides Document Support For ScannedDocuments ...

Canon MultiPASS C50 Getting Started ENGLISH II-4 Special Function Buttons (2-25) 1 2 3 4 5 6 PRINTER RESET TONE/+ D.T. R CARTRIDGE FUNCTION RESUME J FUNCTION buttonUse this button to access different functions, such as when entering user information, running the MultiPASS C50’s self-cleaning process...

Canon MultiPASS C50 Getting Started ENGLISH II-5 Sending Documents Memory Sending (4-10) Memory sending is a quick and easy way to send a fax. When you use memory sending, the MultiPASS C50 scans the document into its memory as it dials the fax number. If the line is free, the MultiPASS C50 begins s...

Canon MultiPASS C50 Getting Started ENGLISH II-6 Using One-Touch Speed Dialling (3-8) 1. Prepare the document and load it, face down, into the Automatic Document Feeder (ADF). 2. Press the one-touch speed dialling button assigned to the number to which you wish to fax. 1 6 ~ R 3. Press START/COPY. U...

Canon MultiPASS C50 Getting Started ENGLISH II-7 Different Ways to Receive a Fax (5-2) The MultiPASS C50 provides you with four different modes for receiving faxes. To decide which mode will best suit your requirements, consider how you want to use the MultiPASS C50: J FAX ONLY MODE: Use this mode i...

Canon MultiPASS C50 Getting Started ENGLISH II-8 Making Copies (6-13) 1. Prepare the document and load, face down, into the Automatic Document Feeder (ADF). 2. Press START/COPY. J The display now shows COPY, the reduction size the copy will be printed at (the default is 100%), and the number of copi...

Canon MultiPASS C50 Getting Started ENGLISH II-9 Storing Numbers for Coded Speed Dialling (3-10) You can store up to 50 telephone/fax numbers for coded speed dialling. As with one-touch speed dialling, you can register the numbers directly from the operation panel of the MultiPASS C50 or from the De...

Canon MultiPASS C50 Getting Started ENGLISH II-10 Storing Numbers for One-Touch Speed Dialling (3-3) Your MultiPASS C50 can store up to 6 of your most frequently dialled numbers under the one-touch speed dialling buttons. You can register the numbers directly from the MultiPASS C50 operation panel o...

Canon MultiPASS C50 Getting Started ENGLISH II-11 Creating Groups for Group Dialling (3-17) The numbers you use in a group must already be stored under one-touch speed dialling buttons or coded speed dialling codes. Each group is stored under a one- touch speed dialling button or a coded speed diall...

Canon MultiPASS C50 Getting Started ENGLISH II-13 Sending a Fax from Your Computer (PC Faxing) (5-2) You can send a PC fax from any Windows application that allows printing. To PC fax, you create and then print a document from the desired Windows application using the C50 fax driver. The following i...

Canon MultiPASS C50 Getting Started ENGLISH II-14 Receiving a Fax (5-11) An incoming fax is received by your C50 and can be uploaded to the Desktop Manager. The uploaded fax is stored in the In Box folder for your review. A flashing arrow next to the folder name signals that you have received a new ...

Canon MultiPASS C50 Getting Started ENGLISH II-15 Printing a Document (3-2) Once you have installed the software, you are ready to print a document – from a Windows application, such as Word for Windows – using the C50. Printer options are initially installed with default settings, enabling you to p...

Canon MultiPASS C50 Getting Started ENGLISH II-16 Scanning with the Desktop Manager (6-4) You can use the C50 and the Desktop Manager to scan a monochrome image of a document. The resulting document in the Desktop Manager is automatically provided a unique system-assigned name. You can rename the do...

Canon MultiPASS C50 Getting Started ENGLISH II-17 Scanning from a Windows Application (6-5) You can use the C50 to scan documents directly into a Windows application that supports a TWAIN interface (such as Corel Print House Magic). Some applications allow multiple page scans, while others do not. I...

Canon MultiPASS C50 Getting Started ENGLISH II-18 Setting Up Speed Dial Assignments (8-15) On the Speed Dial tab, you can set up fax numbers for speed dialling with the C50. You use the fax recipients set up in your Address Book, and assign the desired individual recipients to speed dial codes. If t...

Canon MultiPASS C50 Getting Started ENGLISH II-19 Using MultiPASS Diagnostics (8-26) If you have difficulties with your MultiPASS software or hardware, you can use the MultiPASS Diagnostics. You use the MultiPASS Diagnostics to verify your MultiPASS software and hardware installation, and identify h...

Canon MultiPASS C50 Getting Started ENGLISH II-20 Jams in the Automatic Document Feeder (ADF) (8-6) 1. Press STOP. 2. Open the operation panel by gently pulling it toward you. 3. Remove the jammed page by pulling it in either direction. 4. Gently push the operation panel shut until it clicks. 5. Pre...