Canon 4000D - User Manual - manualsarea.com

Page 2 - Contents; Foreword

- 01 - - 02 - Foreword Warning Names of Parts Body LCD Panel Battery Installing Batteries Battery Level Indication Setting the Flash Trigger Power Switch Automatically Enter Power Saving Mode Power Switch of AF Assist Beam Channel Settings Wireless ID Settings Mode Settings Output Value Settings Fla...

Page 4 - SYNC; LCD Panel; Names of Parts; Battery

1 2 3 CH 01 ABC M 1 /128 5 6 7 8 9 SYNC V0.2 1/4 BLUE.T. BEEPZOOM 11 4 10 4 LCD Panel 1. Channel (32) 2. Camera Connection 3. Modeling Lamp Master Control4. High-Speed/Rear Curtain Sync 5. Sound 6. Battery Level Indication7. Group 8. Mode 9. Power 10. ZOOM Value 11. Version Names of Parts Installing...

Page 5 - ON

Setting the Flash Trigger Slide the Power Switch to ON, and the device is on and status indicator lamp will not reveal. Note: In order to avoid power consumption, turn off the transmitter when not in use. Power Switch 1. The system will automatically enter standby mode after stop operating the trans...

Page 6 - Output Value Settings; Flash Exposure Compensation Settings

Setting the Flash Trigger Output Value Settings In the M mode 1 . Press the group button to choose the group, turn the select dial, and the power output value will change from Min to 1/1 in 0.3 stop increments. Press the <SET> button to confirm the setting. 2. Press <ALL> button to choos...

Page 7 - Modeling Lamp Settings; BEEP; Shutter Sync Settings; ZOOM Value Settings; ZOOM; Sync Socket Settings

1/4 ZOOM SYNC V0.2 BLUE.T. BEEP Modeling Lamp Settings 1. Long press the <MENU> button for 2 seconds to control the ON/OFF of the modeling lamp. Setting the Flash Trigger 1/4 ZOOM SYNC V0.2 BLUE.T. BEEP OFFON Shutter Sync Settings Press the < MENU > button to enter C.Fn BEEP and press th...

Page 8 - SHOOT Function Settings; DELAY

Setting the Flash Trigger SHOOT Function Settings Press the < MENU > button to enter C.Fn SHOOT. Press the < SET > button to choose one-shoot or multi- shoots, and press the < MENU > button again to back to the main menu. One-shoot: When shooting, choose one-shoot. In the M and Mul...

Page 9 - SCAN; Zoom; mm; SLAVE; CH

Setting the Flash Trigger Setting Signs 1/128(0.3)1/256(0.3)1/128(0.1)1/256(0.1)3.0(0.1)2.0(0.1)5 (A-E)3 (A-C)60sec 30min 60minOFF12secOFFON-3-+3 Settings and Description The minimum output is 1/128(change in 0.3 step)The minimum output is 1/256(change in 0.3 step)The minimum output is 1/128(change ...

Page 11 - GDBH A7BC

Using the Flash Trigger Using the Flash Trigger 6. As a Flash Trigger with 3.5mm Sync Cord Jack Operation method: 6.1 The connection method please refers to the contents of “As a Wireless Studio Flash Trigger” and “As a Wireless Shutter Release”. 6.2 Set the transmitter end’s sync cord jack as an ou...

Page 12 - Compatible Smartphone Models

7.5 Full match and back to APP main interface. 7.6 When started the Bluetooth function, the Bluetooth icon will be displayed on the transmitter’s panel. 7.7 Set the channels of the slave flash and the transmitter to the same, and parameters e.g. slave flash mode, power value, modeling lamp and beep ...

Page 13 - Compatible Flash Models; The relationship of; Compatible Camera Models

Compatible Flash Models Receiver - ST-III R-C PRO AC 2.4GHz ST-I 2.4GHz Flash CITI 600 series/ CITI 400 series Hybrid 360 TTL series PIKA 200 series Li-ion58 0II series/ Li-ion350II Series / STORM II/ LUMI II KINO II+ series 600EX-RT/ 580EXII / 580EX / 430EXII Li-ion580 ETTL HYBRID360 Manual, RIKO40...

Page 14 - Restore Factory Settings; Technical Data; Firmware Upgrade

Technical Data ST-III Plus -C Canon EOS cameras (E-TTL II autoflash) Support for the cameras that have PC sync socket. iphone, Huawei, Samsung(see the compatible smartphone models for details) 2*AA batteries E-TTL II Yes Yes Yes Yes, ±3 stops in 1/3 stop increments Yes Yes Yes Yes Control the beeper...

Page 15 - Attentions; The Reason & Solution of Not Triggering in; Caring for Flash Trigger

Attentions 1. Unable to trigger flash or camera shutter. Make sure batteries are installed correctly and Power Switch is turned on. Check if the transmitter and the receiverare set to the same channel, if the hotshoe mount or connection cable is well connected, or if the flash triggers are set to th...

Page 16 - FCC Statement

A. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. B. Warning: Changes o...

Canon 4000D - User Manual

Table of Contents:

Summary

Other Canon Models