Campbell Hausfeld DG480000CK - Manual

Operating Instructions
Instructions d’Utilisation
Manual de Instrucciones

20

Notes
Notes
Notas

Detail Sander

Operating Instructions

DG480000CK

Description

Detail sanders are designed for
uniform sanding and polishing in
corners and tight spaces. Ideal for flush
sanding along edges This sander has a
built-in dust port for vacuum or dust
bag attachment.

Unpacking

When unpacking this product, carefully
inspect for any damage that may have
occurred during transit.

General Safety
Information

This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.

Danger

indicates

an imminently hazardous situation
which, if not avoided, will result in
death or serious injury.

Warning

indicates

a potentially hazardous situation
which, if not avoided, COULD result in
death or serious injury.

Caution

indicates

a potentially hazardous situation
which, if not avoided, MAY result in
minor or moderate injury.

Notice

indicates

important information, that if not
followed, may cause damage to
equipment.

CALIFORNIA PROPOSITION 65

You can create dust when you
cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth

defects, or other reproductive harm.
Wear protective gear.

This

product

or its power cord contains chemicals
known to the State of California to
cause cancer and birth defects or other
reproductive harm. Wash hands after
handling.

The following safety precautions must
be followed at all times along with any
other existing safety rules.

1. Read all manuals

included with this
product carefully. Be
thoroughly familiar with
the controls and the
proper use of the equipment.

2. Only persons well acquainted with

these rules of safe operation should
be allowed to use this tool.

Safety glasses and ear
protection must be worn
during operation.

3. Do not wear loose fitting clothing,

scarves, or neck ties in work area.
Loose clothing may become caught
in moving parts and result in serious
personal injury.

IN714301AV 12/06

4. Do not wear jewelry when

operating any tool. Jewelry may
become caught in moving parts and
result in serious personal injury.

5. Always use attachments designed

for use with this tool. Do not use
damaged or worn attachments.

6. Never trigger the tool when not

applied to a work object.
Attachments must be securely
attached. Loose attachments can
cause serious injury.

7. Never point a tool at oneself or any

other person. Serious injury could
occur.

8. Use steady, even pressure when

using tool. Do not force. Too much
pressure can cause tool to overheat.

9. Keep all nuts, bolts and screws tight

and ensure equipment is in safe
working condition.

© 2006 Campbell Hausfeld/Scott Fetzer

B U I L T T O L A S T

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

See Warranty on page 5 for important information about commercial use of this product.

For parts, product & service information

visit

www.chpower.com

Specifications

Voltage

120V 60Hz

Power Rating

0.8 A

Weight

2 lbs.

MANUAL