Cadillac 2006 STS - Manual

Using Your Home or PresetDestinations These destinations are available for selection whiledriving. 1. Press the power/volume knob to turn the system on. 2. Insert the DVD map disc. See “Installing the Map DVD” under Maps on page 2-4 for more information. A notice may appear. Touch the I agree screen...

Guidance Volume To adjust the volume of voice guidance prompts, do thefollowing: 1. Press the CONFIG hard key. 2. Press the 3 (navigation set up) screen button. 3. Press the > Volume screen button. 4. Select the desired volume or select Off. The system will play back the new volume level. See “Vo...

Features and Controls Using the Navigation System This section presents basic information you will need toknow to operate the navigation system. Use the hard keys located on the navigation systemalong with the available touch screen buttons on thenavigation screen to operate the system. See Navigati...

SRCE (Source): Press the source key to switchbetween the audio sources. Pressing this key will switchbetween the radio and the CD/DVD player. SeeNavigation Audio System on page 3-2. AUX (Auxiliary): Press the AUX key to access screensfrom which you will operate Bluetooth ® , OnStar ® , or control vi...

A - Z (Alphabet): Touch this screen button to display tothe alpha keypad. Others: Touch this screen button to display specialcharacters. There are two pages of characters available.Use the right and left arrow screen buttons to view thepages. U (Space): Touch this screen button to enter a space betw...

Installing the Map DVD When your vehicle is delivered from the factory, thedealer may have installed the map DVD. If the map DVDwas not installed, use the following directions to loadthe map DVD: Read the following steps completely before operatingthis feature. 1. Turn the ignition on. 2. Load the m...

Scrolling the Map Touch anywhere on themap screen twice and thescroll symbol will appear.Use this feature toscroll across the map. Hold your finger in any direction outside of the scrollsymbol and the map will continue to scroll in thatdirection until you remove your finger from the mapscreen. If sc...

Guidance Windows Select the guidancewindow symbol, from themap, to display theguidance window options. Select from one of the following six options that allow youdifferent views and information of the map screen.Availability of these options depends on the current route. Single Map Mode Select the m...

Freeway Mode Select the highwayguidance symbol to displaythe upcoming exitnumber, distance to theexit, available POIs at theexit, and a window withdirection and distanceto the next maneuver. Use the up and down arrows to scroll through thedisplayed list. To view the available POIs for an exit,select...

Traveling Across Regions If you plan to drive across many states, you may haveto change the region selected as you travel to yourdestination. To do so, do one of the following: • Change the selected region in the search area asyou get closer to your destination. See Destinationon page 2-37. • Change...

Change Route Select Change Route to access the ROUTE OPTIONSmenu. The availability of these screens depends onif a route is planned or if you are driving a route. Youcan perform the following functions from this menu: H Search Condition Select this screen button from the ROUTE OPTIONSscreen to acces...

Destination Press the ROUTE key to access the Destination Entryscreen. From this screen, you can choose fromseveral options to plan a route by entering destinationpoints. Once your destination entry is complete, regardless ofwhich method of entry you used, a map screen with thedestination previewed ...

Region The DESTINATION ENTRY screen displays a map ofthe 48 contiguous United States and a part of Canadadivided into 11 regions. Before selecting a method of destination entry, reviewthe search area map to make sure your destinationis located in the highlighted region. Touch the REGION screen butto...

Address The address destination entry method allows you toinput an address by providing the system with a housenumber, street name, and city. C (Address): Touch this screen button to access the ADDRESS screen. At this point you can choose toenter the address one of three ways, either housenumber fir...

Map The map destination entry method allows you to choosea destination by scrolling on the map. I (Map): Touch this screen button from the DESTINATION ENTRY screen to enter the mapdestination entry method, then do the following: 1. Touch the map for the desired area you wish to set as your destinati...

Intersection The intersection destination entry method allows you toset two intersecting streets as your destination. M (Intersection): Touch this screen button to access the INTERSECTION screen. To use the intersection destination entry method, do thefollowing: 1. Enter the first of two streets in ...

Phone Number The phone number destination entry method allows youto choose a destination by entering a phone number.The phone number must be in the list of POIs, thatis contained on the map DVD, in order for the system toretrieve the destination. U (Phone Number): Touch this screen button to access ...

Freeway Entrance/Exit The freeway entrance/exit destination entry methodallows you to choose a destination by entering a freewayentrance or exit point. K (Freeway Entrance/Exit): Touch this screen button to access the FREEWAY ENT/EXIT screen. To use the freeway entrance/exit destination entrymethod,...

Emergency The emergency destination entry method allows you toenter a destination by choosing from three categories. | (Emergency): Touch this screen button to access the EMERGENCY screen. When in this screen, thesystem will display your current position address and thelongitude and latitude informa...

Memory Points The memory points destination entry method allows youto choose a destination from a list of points that youhave previously stored. N (Memory Point): Select this screen button from the DESTINATION ENTRY screen to access the MEMORYPOINTS screen. To use this destination entry method, do t...

To use the previous destination entry method, do thefollowing: 1. Choose a previous destination from the list. Use the arrow to the right of the destination to view theentire destination name as necessary. A map screen will appear with the destinationmarked. 2. Select the h (destination) symbol scre...

To use the coordinates destination entry method, do thefollowing: 1. Touch N or S next to LAT. to enter the direction of the latitude coordinate. 2. Input the numeric portion of the latitude coordinate using the keypad. 3. Touch E or W next to LONG. to enter the direction of the longitude coordinate...

2. Select the h (destination) symbol screen button to calculate the route. 3. Select the Guide screen button to start route guidance. See “Getting Started on Your Route” later in thissection for more information. Home L (Home): This feature allows you to plan a route to one previously stored destina...

Three Routes To access this screen, touch the 3routes button on themap screen while planning a destination. When applicable, the system will calculate up to threedifferent versions of your current route in three differentcolors: Quick, Normal, and Short. The routes areshown with distance to destinat...

Configure Menu Your vehicle’s system may have one of the followingconfigure menus. Press the CONFIG hard key todetermine which screen your vehicle’s system willdisplay. Press the CONFIG hard key to access this menu,allowing adjustment of several of the systems featuresand preferences. See “Memory” u...

Bluetooth ® E (Bluetooth ® ): Touch this screen button to access the Bluetooth ® setup screen. See Bluetooth ® Phone on page 6-2 for more information on the Bluetooth ® system. Audio Touch the Audio screen button to access a screenwhere several audio features may be turned on and offand several opti...

Category: This information will change depending onwhat audio source is selected. This button is onlyavailable when you are using the FM or XM™ audiomodes. Touch this button to turn the Category functionon. When on, the button will be available to select fromthe audio main menu. Traffic: This button...

PM: Touch this screen button when setting the timein PM. PST, MST, CST, EST: Touch one of these screenbuttons to choose between Pacific Standard Time (PST),Mountain Standard Time (MST), Central StandardTime (CST), and Eastern Standard Time (EST). GPS TIME: Touch this screen button to match thenaviga...

Vehicle Positioning At times, the position of the vehicle on the map may beinaccurate due to one or more of the followingreasons: • The road system has changed. • The vehicle is driving on slippery road surfacessuch as in sand, gravel and/or snow. • The vehicle is traveling on winding roads. • The v...

Problems with Route Guidance Inappropriate route guidance may occur under one ormore of the following conditions: • You have not turned onto the road indicated. • Route guidance may not be available when usingautomatic rerouting for the next right or left turn. • The route may not be changed when us...

Navigation Audio System Notice: Before adding any sound equipment to yourvehicle, such as an audio system, CD player, CBradio, mobile telephone, or two-way radio, make surethat it can be added by checking with your dealer.Also, check federal rules covering mobile radio andtelephone units. If sound e...

Finding a Station Press the band/source screen button, located in the topleft corner (AM, FM, CD, etc.), from any screen to accessthe audio source screen. Once this screen is displayed,press the BAND hard key to toggle between the bands ortouch the desired band screen button, to select it. Scan: To ...

Preset Stations Storing Preset Stations This feature allows you to store up to 24 preset stations.You can store six AM, six FM, six WX (weather), andsix XM™, if equipped. To store presets, do the following: 1. Turn the audio system on or select the BAND hard key. 2. Select the audio band. 3. Seek, s...

Audio Adjust e (Audio Adjust): Touch this hard key to access the AUDIO ADJUST menu and to adjust the tone, DigitalSignal Processing (DSP), fade, and balance for allsources. The system automatically stores audioadjustment settings as changes are made to a presetstation. Audio Pilot: Bose AudioPilot ®...

Each of the six category names displayed, include agrouping of other program types, see the following table.This is not available for AM or WX (weather) stations. Group Name Category POP Rock Classic Rock Adult Hits Top 40 Oldies Music Nostalgia College EASY Soft Rock Soft R&B Soft R&B Relig...

XM Radio Messages Radio Display Message Condition Action Required XM Updating Updating encryption code The encryption code in the receiver is being updated and no action is required. This process should take no longer than30 seconds. No XM signal Loss of signal The system is functioning correctly, b...

Playing an Audio CD The numbered screen buttons, 1 through 6, represent theorder of the discs loaded in the changer. If there are onlytwo discs loaded, only screen buttons 1 and 2 will beavailable. r (Play): Select this screen button or press one of the available screen buttons, 1 through 6, to begi...

Using an MP3 MP3 Format When creating an MP3 disc, the following is a list ofguidelines. If the customer does not follow theseguidelines when recording a CD-R(W), the CD maynot play. • Sampling rate: 16 kHz, 22.05 kHz, 24 kHz, 32 kHz,and 44.1 kHz. • Bit rates supported: 32, 40, 48, 56, 64, 80, 96, 1...

B RPT (Repeat Disc): If this symbol appears on the display after pressing the repeat screen button, thesystem will repeat all of the tracks on the disc currentlyplaying. Select the OFF screen button to turn offrepeat play. OFF: Select this screen button to turn off the scan,random, or repeat functio...

Search: Select this screen button to search through aDVD by Title/Group, or Chapter/Track. Touch Keypad toaccess the numeric keypad used to enter data in thesesearches. To use the search button, do the following: 1. Select the Search screen button from the DVD-Video or DVD-Audio screen. 2. Select th...

Tint: Select the plus (+) or minus ( − ) signs next to this symbol to increase or decrease the screen tint. ' (Color): Select the R (red) or G (green) next to this symbol to increase or adjust the color of the screen. p (Widescreen): Select this screen button to view a video DVD in widescreen format...

Auxiliary Devices The audio and video adapters allow you to connect audioand video devices, such as a hand-held computer, videocamera or a video cassette recorder, to the navigationsystem. The audio and video input from the playbacksource is viewed on the navigation system screen andthe audio is hea...

Auxiliary Video Image Screen To play other audio sources using the auxiliary device,do the following: 1. Connect the auxiliary device as explained previously. 2. Play the auxiliary device according to the auxiliary devices instructions. 3. Press the AUX hard key. 4. Select the Video In/Out screen bu...

Voice Recognition The navigation system’s voice recognition allows forhands-free operation of navigation, phone, audio system,climate controls, windows, OnStar ® , and memory features. Voice recognition can be used when the ignitionis on or when Retained Accessory Power (RAP) is active.See “Retained...

• Background noise may cause voice commands to bemisunderstood, including airflow noise from wind. • To use the voice recognition system, the map DVDmust be loaded. This system is able to recognize commands in fivedifferent languages. The system will only recognizecommands based on the language sele...

Voice Recognition Commands The following list shows all of the voice commandsavailable for the navigation system with a brief descriptionof each. The commands are listed with the optional wordsin brackets. To use the voice commands, refer to theinstructions listed previously. Display Commands Displa...

Map Commands Navigation zoom in, navigation zoom out: Thesecommands instruct the system to zoom in or out onthe map. Navigation [change] map direction: This commandinstructs the system to change the direction of the mapto heading up/north up depending on previous setting. Navigation store [this poin...

Shopping Locations • Navigation Convenience Store • Navigation Department Store • Navigation Grocery Store • Navigation Home and Garden • Navigation Pharmacy • Navigation Shopping Mall • Navigation Specialty Food Store • Navigation Other Retail Stores Transportation • Navigation Airport • Navigation...

Navigation delete all waypoints and destination,navigation cancel all waypoints and destination:These commands instruct the system to cancelthe current destination and all waypoints. The systemwill request that you confirm. After the prompt,state “Yes” to confirm or “No” to cancel. Navigation voice ...

Window Commands Windows up, windows down: These commandsinstruct the system to express up or express down thewindows. The system will request that you confirm.After the prompt, state “Yes” to confirm or “No” to cancel. Windows: This command instructs the system to assistwith window commands. Help co...

Vehicle Customization Personalization Your vehicle is equipped with personalization that allowsyou to program certain features to a preferred setting forup to two people. Features such as driver position, doorlock personalization, passenger window personalization,chime personalization, driver inform...

If the screens appear in a language that you do notunderstand, do the following: 1. Turn off the vehicle. 2. Open and close the door. Wait about 30 seconds. 3. Turn on the vehicle. 4. Press the map hard key. 5. Touch the globe symbol screen button from the WARNING screen. See Getting Started on page...

Personalization Menu Settings Off Mode If you choose not to use the Personalization Menu, the following defaults will be active on your vehicle: Feature Default Mode Lock/Unlock All Doors unlock in parkAll Doors unlock when PULLING front door handleKeyless Access All Doors lock eight seconds after l...

Lock/Unlock Your vehicle’s system may have one of the followinglock/unlock menus: After making selections, touch the Back screen buttonto return to the PERSONAL SETTINGS screen. Select this screen button to change automatic doorlocking and unlocking and keyless access transmitterlocking and unlockin...

When this feature is selected, choose from one of thefollowing options: DRIVER unlock at OFF: The driver’s door willautomatically unlock when the ignition is turned off. ALL doors unlock at OFF: All of the doors willautomatically unlock when the ignition is turned off. DRIVER unlock in PARK: The dri...

Driver Greeting: You can choose between a personalgreeting and a standard greeting for Driver 1 or Driver 2.This greeting is shown on the instrument cluster whenyou turn the vehicle on. If you choose to have a personal greeting, touch the Editscreen button. The alpha keypad will display. Type inthe ...

Remote Start Your vehicle’s system may have one of the followingremote start menus: After making selections, touch the Back screen buttonto return to the PERSONAL SETTINGS screen. When this feature or any of the following features areselected on, the button next to the name will appearhighlighted. 5...

Select this screen button to select the features thatremote start will activate. See “Remote Vehicle Start”under “Keyless Access System Operation” in the Index ofyour vehicle’s owner manual for more information. Selectany or all of the following items: The Remote Start screen button must be highligh...

Memory Infotainment Settings and Presets These settings and presets are set automatically.They include the following: • Radio presets • Navigation • Address Book • Language • HUD display • Climate control settings For more information, see each item in the Index ofyour vehicle’s owner manual. Memory...

2. Press any button on the appropriate keyless access transmitter to identify yourself as Driver 1 or Driver 2.The numbers on the back of the keyless accesstransmitters correspond to the driver number. 3. Press the CONFIG hard key. 4. Touch the Vehicle screen button. 5. Press the Memory screen butto...

STORE Driver Settings To store driver settings, do the following: STORE DRIVER Settings: This feature allows you tostore the seat, steering column, and outside mirrorspositions. To store driver settings, do the following: 1. Select the STORE Driver Settings screen button. 2. Adjust your settings for...

Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2 Bluetooth ® Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2 Section 6 Phone 6-1

Phone Bluetooth ® Phone The navigation system is equipped with Bluetooth ® . Bluetooth ® is a wireless communication system that allows you to use a Bluetooth ® compatible phone in a hands-free mode. You may also set up a phone directoryfor use in your vehicle. Up to 12 phones may beregistered with ...

Phone Book Screen This screen allows access to your Bluetooth ® Phone Book where you can store names and phone numbers.Information in this screen must be inputted using the Newscreen button or by copying and adding the number fromthe last 10 dialed or received options. This phone book isstored on th...

Edit: This screen button allows you to edit an existingphone book entry. Y All (Delete All): This screen button deletes all phone book entries. Last 10: This screen button will take you to a screenshowing your last 10 calls either sent or received usingthe Bluetooth system. You are able to place pho...

qr (Scroll to End/Beginning): These screen buttons will allow you to scroll through the entry asnecessary. Save: This screen button will allow you to save theentry in your phone book. Y All (Delete All): This screen button deletes all phone book entries in the screen you are currently in, eitherrece...