Cadillac 2000 - Manual
Cadillac 2000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Installation Procedure
- Page 7 – Quarter Panel Sectioning; Removal Procedure
- Page 13 – Preparation Of Service Part
- Page 14 – Rear Rail Sectioning
- Page 16 – FRT
- Page 17 – Engine Compartment Dimensions – 2000 Cadillac; Description
- Page 18 – Underbody Dimensions – 2000 Cadillac DeVille
- Page 19 – Body Side Dimensions – 2000 Cadillac DeVille
2000 Cadillac DeVille
Outer Wheelhouse Sectioning 1-12
Inner Front Pillar Sectioning 1-9
Inner Center Pillar Sectioning 1-10
Outer Front Pillar Sectioning 1-2
Outer Center Pillar Sectioning 1-4
Rear Rail Sectioning 1-13
Quarter Panel Sectioning 1-6
Body Dimensions 1-17/18
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation Procedure IMPORTANT: Remove all foam prior to weldingthis section of the service panel. 1. Prepare mating surfaces.2. Apply weld-through primer to mating surfaces prior to assembly. 3. Weld backing plates to vehicle at rocker. IMPORTANT: Replace hinge pillar blocksprior to welding outer...
1-6 2000 cadillac deville Quarter Panel Sectioning Removal Procedure The service part comes with lower quarter panelextension and taillamp pocket attached. Theseparts can be left on the vehicle if not damaged.Drill out factory welds on the car and service partand use the outer panel only. IMPORTANT:...
1-12 2000 cadillac deville Outer WheelhouseSectioning Removal Procedure 1. Locate horizontal laser-weld line in upper quarter area (Fig. 1-18). 2. Measure down 25␣ mm (1␣ in) and scribe a cut line. 3. On the vehicle rocker area, locate and scribe a vertical cut line in the recommended sectionarea. 4...
