Page 2 - Read This Manual; Owner’s Manual; CAUTION
Page 2 Read This Manual Inside you’ll find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner. You’ll find many answers to common problems in the cha...
Page 3 - Page 3; Safety Precautions; WARNING
Page 3 Safety P recautions Safety Precautions To prevent injury to the user or other people and property damage, the instructions shown here must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The level of risk is shown by the following indications. • Plug...
Page 5 - Page 5; This could injure the pet or harm the plant.
Page 5 Safety Pr ecautions CAUTION • Do not put a pet or house plant where it will be exposed to direct air flow. This could injure the pet or harm the plant. • Hold the plug by the head of the power plug when taking it out. Otherwise, it may cause electric shock and damage. • Ensure that the instal...
Page 6 - is pushed, or it can not be reset. Please contact Customer Service.; NOTICE; Grounding type wall receptacle; Operation of Current Device
Page 6 Safety P recautions NOTICE • Do not use this device to turn the unit on or off.• Always make sure the RESET button is pushed in for correct operation.• The power supply must be replaced if it fails to reset when either the TEST button is pushed, or it can not be reset. Please contact Customer...
Page 7 - Page 7; EXPLANATION OF SYMBOLS DISPLAYED ON THE UNIT; not recommended by the manufacturer.; flammable materials
Page 7 Safety Pr ecautions WARNING This symbol shows that this appliance used a flammable refrigerant. If the refrigerant is leaked and exposed to an external ignition source, there is a risk of fire. CAUTION This symbol shows that the operation manual should be read carefully. CAUTION This symbol s...
Page 8 - Energy Rating Information:; Unit Specifications and Features; EXHAUST HOSE INSTALLATION:
Preparation Design and Compliance Notes Unit S p e c ifi c a tio n s and F eatu res Design Notice: In order to ensure the optimal performance of our products, the design specifications of the unit and remote control are subject to change without prior notice. Energy Rating Information: This product ...
Page 9 - Control Panel Features; Mode Button; Power Button; LED display; NOTE; Operating Instructions; Page 9
Cool Fan Dry On | Off Mode Oper ating Instructions Control Panel Features Mode Button Selects the desired operating mode. Each time you press the button, a mode is selected in a sequence that goes from COOL, FAN and DRY. The mode light illuminates and indicates the selected mode. Up (+) and Down (-)...
Page 10 - Other Features; This feature can be activated from
Oper ating Instructions COOL operation • Press the “MODE” button until the “COOL” indicator light comes on. • Press the UP and DOWN buttons “+” or “-” to select your desired room temperature. Thetemperature can be set within a range of17°C~30°C/62°F~86°F. • The fan speed is automatically set to auto...
Page 11 - Water drainage; Remove the; Continuous; • When the water level of the bottom tray reaches; Bottom drain plug
NOTE Make sure the hose is secure so there are no leaks. Direct the hose toward the drain, making sure that there are no kinks that will restrict water flow. Place the end of the hose into the drain making sure the end of the hose is directed downward. When the continuous drain hose is not used, ens...
Page 12 - Choosing the Right Location; • Product recycling must be done according to local regulations.; Remote Controller Instruction for details.; Installation Instructions
In stallation In structions Your installation location should meet the following requirements: • Ma • The unit must be near a window to install the exhaust hose and window kit into. ke sure that you install your unit on an even surface to minimize noise and vibration. • The unit must be installed ne...
Page 13 - Tools Needed; Part; Unit adaptor; Quantity
Installation Instructions Page 13 • Medium Phillips screwdriver • Tape measure or ruler • Knife or scissors • Saw (optional, to shorten window adaptor for narrow windows). Your Window Installation Kit fits windows 67.5-123 cm (26.5”-48”) and can be shortened for smaller windows. Tools Needed Accesso...
Page 14 - bly; Window Installation Kit; Exhaust hose; Once the Exhaust Hose asse
In stallation In structions Page 14 Step One: Preparing the exhaust hose asse m bly Press the exhaust hose into the window slider adaptor and unit adaptor, clamp automatically by elastic buckles of the adaptors. Step Two: Install the exhaust hose asse m bly to the unit Push the Exhaust hose into the...
Page 15 - Type 1: Hung window installation; Window; Insert the window slider assembly into the window
Installation Instructions Page 15 Window Installation Kit (cont.) Type 1: Hung window installation 1. Cut the adhesive foam seal A and B strips to theproper lengths, and attach them to the window sashand frame as shown. Foam seal B(Adhesive type-shorter) Foamseal A(Adhesivetype) Window slider A Wind...
Page 16 - Type 2: Sliding window installation
In stallation In structions Page 16 Type 2: Sliding window installation 1. Cut the adhesive foam seal A and B strips to theproper lengths, and attach them to the window sashand frame as shown. Window slider A Window slider B (if required) Foam seal B(Adhesivetype-shorter) Foam seal A (Adhesive type)...
Page 17 - Maintenance Tips; heat can shorten the lifespan of the unit.; Remove the air filter; Air filter; DO NOT operate the unit without; Care and Cleaning
Care and Cleaning Page 17 Safety Precautions Clean the Air Filter Clean the Unit Store the Unit When Not in Use Maintenance Tips • Be sure to clean the air filter every 2 weeks for optimal performance. • The water collection tray should be drained immediately after P1 error occurs, and beforestorage...
Page 18 - Proble; Malfunction Diagnosis; Troubleshooting Tips
T ro u b le sh o o tin g T ip s Page 18 Proble m Possible Cause Troubleshooting Unit does not turn on when pressing ON/OFF button P1 Error Code. The water collection tray is full.Turn off the unit, drain the water from the water collection tray and restart the unit. In COOL mode: room temperature is...
Page 19 - Using The Remote Control; Location of the remote controller; • The air conditioner will not operate if curtains, doors; Remote Control Instructions; Remote Control Specifications; Model
Ope rating In structions (With R e mote ) Using The Remote Control Location of the remote controller Use the remote controller within a distance of 8 meters / 26 feet from the appliance, pointing it towards the receiver. Reception is confirmed by a beep. CAUTION • The air conditioner will not operat...
Page 20 - Function Buttons
Oper ating Instructions (With R e mot e ) Function Buttons Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control. The following is a brief introduction to the remote control itself. For instructions on how to operate your air conditioner, refer to...
Page 21 - Not sure what a function does?; Handling the Remote Control; Notice
Ope rating In structions (With R e m o te ) Not sure what a function does? Refer to the Operating Instructions section of this manual for detailed descriptions of the functions available using the remote. INSERTING AND REPLACING BATTERIES Your air conditioning unit comes with two AAA batteries. Inse...
Page 22 - Remote LED Screen Indicators
Remote LED Screen Indicators AUTO COOLDRY HEATFAN Transmission Indicator Lights up when remote sends signal to unit MODE display Displays the currentmode, including: TIMER ON display Displays when TIMER ON is set TIMER OFF display Displays when TIMER OFF is set Battery display Low battery detection ...
Page 23 - Basic Functions; SETTING THE DESIRED TEMPERATURE; Changing the Fan Speed
Basic Functions 1 3 2 O N /O F F T E M P SHORT CUT TIMER ON TIMER OFF MODE FAN SLEEP LED SETTING THE DESIRED TEMPERATURE CHANGING THE MODE 1. The operating temperature range for this unit is 62°F-86°F (17-30°C). You can increase or decrease the set temperature in 1°F (1°C) increments by pressing the...
Page 24 - Timer Functions; sec; TIMER OFF function
Timer Functions Your air conditioning unit has two timer-related functions: TIMER ON - sets the amount of time after which the unit will automatically turn on. TIMER OFF - sets the amount of time after which the unit will automatically turn off. TIMER ON function The TIMER ON function allows you to ...
Page 25 - Wait 2 seconds, then the TIMER OFF function will be; T i m e r on; Your remote display
NOTE When setting the TIMER ON or TIMER OFF functions, up to 10 hours, the time will increase in 30 minute increments with each press. After 10 hours and up to 24, it will increase in 1 hour increments. The timer will revert to zero after 24 hours.You can turn off either function by setting the time...
Page 26 - Advanced Functions
Advanced Functions SHORTCUT Function Note: O N /O F F T E M P SHORT CUT TIMER ON TIMER OFF MODE FAN LED SLEEP SLEEP Function The SLEEP function is used to decrease energy use while you sleep (and don’t need the same temperature settings to stay comfortable). Used to restore the current settings or r...
Page 27 - Warranty
W ar ranty Air Conditioner Limited Warranty Your product is protected by this Limited Warranty: Warranty service must be obtained from Midea Consumer Services or an authorized Midea servicer. Warranty • One year limited warranty from original purchase date. Midea, through its authorized servicers wi...
Page 28 - How to Stay Cool with a New Portable Air Conditioner
How to Stay Cool with a New Portable Air Conditioner What should I look for first when purchasing a portable air conditioner? Why is the cooling capacity lower on newer models than on older units? Because of a new federal test procedure for Portable Air Conditioners, you may notice that the cooling ...
