Page 3 - SWPIM-BRI Installation Guide; NOTICE; FCC NOTICE
SWPIM-BRI Installation Guide i NOTICE Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes have been made. The hardw...
Page 13 - CONTENTS
SWPIM-BRI Installation Guide xi CONTENTS INTRODUCTION Using This Guide .......................................................................... xiiiStructure of This Guide................................................................. xivSWPIM-BRI Features ..........................................
Page 15 - INTRODUCTION; Welcome to the Cabletron Systems; USING THIS GUIDE
SWPIM-BRI Installation Guide xiii INTRODUCTION Welcome to the Cabletron Systems SWPIM-BRI Installation Guide . This manual gives an introduction to the SWPIM-BRI, lists features and capabilities, details the cabling pinouts, and explains how to install the SWPIM-BRI. The SWPIM-BRI provides S/T-inter...
Page 16 - STRUCTURE OF THIS GUIDE; Introduction
Introduction xiv SWPIM-BRI Installation Guide STRUCTURE OF THIS GUIDE This guide is organized as follows: This Introduction provides preliminary information that will aid in using this manual, lists technology and user’s guides that may help the user to set up and manage the SWPIM-BRI, gives an over...
Page 17 - RELATED MANUALS
Introduction SWPIM-BRI Installation Guide xv RELATED MANUALS The following Cabletron Systems manuals may help the user to set up and manage the SWPIM-BRI: SSR-600 Installation Guide HSIM-SSR-600 Installation Guide 6C105 SmartSwitch 6000 Overview and Setup Guide Ethernet Technology Guide Cabling Guid...
Page 18 - DOCUMENT CONVENTIONS; The following conventions may be used in this document:
Introduction xvi SWPIM-BRI Installation Guide DOCUMENT CONVENTIONS The following conventions may be used in this document: NOTE Note symbol. Calls the reader’s attention to any item of information that may be of special importance. TIP Tip symbol. Conveys helpful hints concerning procedures or actio...
Page 19 - GETTING HELP; Your Cabletron Systems service contract number
Introduction SWPIM-BRI Installation Guide xvii GETTING HELP For additional support related to this device or document, contact Cabletron Systems using one of the following methods: Before calling Cabletron Systems, have the following information ready: • Your Cabletron Systems service contract numbe...
Page 21 - CHAPTER 1; This chapter covers the following items:; UNPACKING THE SWPIM-BRI; Use static electricity precautions when handling the SWPIM-BRI.; Only qualified personnel should install the SWPIM-BRI.
SWPIM-BRI Installation Guide 1-1 CHAPTER 1 INSTALLATION This chapter covers the following items: • Unpacking the SWPIM-BRI (Section 1.1) • Installing the SWPIM-BRI into the host platform (Section 1.2) • A description of the LANVIEW LED indications (Section 1.3) • Connecting the SWPIM-BRI to the netw...
Page 22 - INSTALLING THE SWPIM-BRI; You do not need to power down the host platform to install the; the SWPIM-BRI will be installed, by prying it off the faceplate.; Install the SWPIM-BRI in the host platform by aligning the
Chapter 1: Installation 1-2 SWPIM-BRI Installation Guide 1.2 INSTALLING THE SWPIM-BRI The SWPIM-BRI can be installed in any available open slot in the host platform. To install the SWPIM-BRI, proceed as follows: 1. You do not need to power down the host platform to install the SWPIM-BRI. Check the h...
Page 23 - Installing the SWPIM-BRI into the Host Platform; The SWPIM-BRI must be configured before the WAN connection is
Installing the SWPIM-BRI SWPIM-BRI Installation Guide 1-3 Figure 1-1 Installing the SWPIM-BRI into the Host Platform 8. Fasten the SWPIM-BRI with the thumbscrew. 9. Replace power to the host platform, if necessary. Check to see that the host platform LED indicators go to their normal configuration. ...
Page 24 - LANVIEW LED INDICATIONS; Refer to Table 1-1 for the link LED indications for the SWPIM-BRI.
Chapter 1: Installation 1-4 SWPIM-BRI Installation Guide 1.3 LANVIEW LED INDICATIONS Refer to Table 1-1 for the link LED indications for the SWPIM-BRI. Refer to Table 1-2 for the status LED indications for the SWPIM-BRI. Table 1-1 Link LED Color Indication Off Disabled or Not Configured Red No Link ...
Page 25 - CONNECTING TO THE NETWORK; Typical Configurations; COMPLETING THE INSTALLATION
Connecting to the Network SWPIM-BRI Installation Guide 1-5 1.4 CONNECTING TO THE NETWORK Figure 1-2 depicts a typical configuration for the SWPIM-BRI. The Cabletron Systems part number for the cable is 9360005-x, where x is the length of the cable. Figure 1-2 Typical Configurations 1.5 COMPLETING TH...
Page 27 - APPENDIX A; PHYSICAL PROPERTIES
SWPIM-BRI Installation Guide A-1 APPENDIX A SPECIFICATIONS This section describes the environmental specifications and safety and approval requirements for the SWPIM-BRI. Cabletron Systems reserves the right to change these specifications at any time without notice. A.1 PHYSICAL PROPERTIES Dimension...
Page 28 - NETWORK INTERFACE; Pin
Appendix A: Specifications A-2 SWPIM-BRI Installation Guide A.2 NETWORK INTERFACE The SWPIM-BRI uses an RJ48 connector for the network port, with two separate pinouts, one for the S/T-interface and the other for the U-interface. The Cabletron Systems Part Number for the cable for both the S/T-interf...
Page 29 - Pinout for the U-Interface Connector; U-Interface RJ48 Pinout; ENVIRONMENTAL REQUIREMENTS; Pinouts for the U-Interface Connection; Operating Temperature:
Environmental Requirements SWPIM-BRI Installation Guide A-3 A.2.2 Pinout for the U-Interface Connector The network interface pin assignments for the U-interface network connector are listed in Table A-2. The connector for the U-interface is shown in Figure A-2: Figure A-2 U-Interface RJ48 Pinout A.3...
Page 30 - A.4 REGULATORY COMPLIANCE; Telecommunications FCC CFR47 Part 68, CS-03
Appendix A: Specifications A-4 SWPIM-BRI Installation Guide A.4 REGULATORY COMPLIANCE This equipment meets the following safety and electromagnetic compatibility (EMC) requirements: Safety UL 1950, CSA C22.2 No. 950, 73/23/EEC, EN 60950, IEC 950, EN 60825 Electromagnetic Compatibility (EMC) FCC Part...
Page 31 - APPENDIX B; This device must only be connected to the ISDN Basic Rate network; of the following information:; If the telephone company finds that the equipment is exceeding
SWPIM-BRI Installation Guide B-1 APPENDIX B FCC PART 68 - USER’S INFORMATION The following instructions are provided to ensure compliance with the Federal Communications Commission (FCC) Rules, Part 68. 1. This device must only be connected to the ISDN Basic Rate network behind an FCC Part 68 regist...
Page 32 - Service can be obtained at Cabletron Systems Technical Support:
Appendix B: FCC Part 68 - User’s Information B-2 SWPIM-BRI Installation Guide 8. In the event of equipment malfunction, all repairs should be performed by our Company or an authorized agent. It is the responsibility of the users requiring service to report the need for service to our Company or to o...