Cabletron Systems 9C114 - Manual
Cabletron Systems 9C114 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Notice; LANVIEW; is a registered trademark, and; SmartSwitch; is a trademark of Cabletron Systems, Inc.; CompuServe; is a registered trademark of CompuServe, Inc.; Ethernet; is a trademark of Xerox Corporation.
- Page 4 – FCC Notice
- Page 5 – Declaration of Conformity
- Page 7 – Contents; Chapter 1
- Page 9 – Installing the 9Cx14 Chassis; Local Management User’s Guide; Features; Multiple Technology Support
- Page 10 – Redundant Power Supply Modules; User’s Guide; The Backplane; Cell Transfer Matrix; Flexible Network Bus 2
- Page 11 – The descriptions of the seven backplane buses are as follows:; System Management Bus 1
- Page 12 – The Cell Transfer Matrix (installed in the 9C714 chassis only); Getting Help; Your Cabletron Systems service contract number
- Page 13 – Site Guidelines; Required Tools; Phillips Screwdriver; Unpacking the SmartSwitch 9000 Chassis; Unpack the chassis by following the steps below:
- Page 14 – Installation Order; Mount the chassis to the rack or other secure location.
- Page 15 – Rack Mounting the Chassis
- Page 16 – Installing a Power Supply
- Page 18 – Attaching the Electrostatic Discharge (ESD) Wrist Strap; Attach the ESD Wrist Strap by following the steps below:; ESD Grounding Receptacle
- Page 19 – Installing the Environmental Module; Environmental Module.
- Page 20 – Installing SmartSwitch 9000 Interface Modules
- Page 22 – Attaching 9C614 INB Terminator Modules; and packing materials in the event the module must be reshipped.)
- Page 23 – Powering up the SmartSwitch 9000; power socket on the lower right front corner of the power supply.
- Page 24 – Check that all LEDs on the INB Terminator Module are green.; INB Terminator; If the LEDs are not green, refer to the; Environmental Module User ’s Guide; Operating Specifications; Environmental Requirements; Operating Temperature:; Regulatory Compliance; Safety
- Page 26 – C614 INB Terminator Module; Dimensions
9031125-03
SmartSwitch 9000
9C114 and 9C714 Chassis
Installation Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
i Notice Notice Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes have been made. The hardware, firmware, or soft...
Notice ii FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOT...
iii Notice Declaration of Conformity Addendum Application of Council Directive(s): 89/336/EEC73/23/EEC Manufacturer ’s Name: Cabletron Systems, Inc. Manufacturer ’s Address: 35 Industrial WayPO Box 5005Rochester, NH 03867 European Representative Name: Mr. J. Solari European Representative Address: C...
