Page 3 - Appendix; Introduction
1 Appendix 9A426-01/9A426-02Module Specific Information Introduction This appendix contains local management information that is specific to the following ATM Modules: • 9A426-01 (1 active front panel port; 1 stand-by front panel port) • 9A426-02 (2 active front panel ports) Local Management Screens...
Page 4 - Module Interfaces
9A426-01/9A426-02 Module Specific Information 2 Module Interfaces The 9A426-01 ATM Module has seven interfaces. Table 1 lists the identifying number, name, and description of each interface. The 9A426-02 ATM Module has eight interfaces. Table 2 lists the identifying number, name, and description of ...
Page 5 - Permanent and Switched Virtual Channels; ATM networks use two different types of Virtual Channels:
3 9A426-01/9A426-02 Module Specific Information Modifying Fields and User Privileges To modify fields on these modules, you must have read-write or super-user privileges. If you have read-only privileges, you can view information; however, you cannot modify any fields. Virtual Channels and Virtual P...
Page 6 - FNB Resource Configuration Screen
9A426-01/9A426-02 Module Specific Information 4 FNB Resource Configuration Screen The 9A426-01/9A426-02 FNB Resource Configuration Screen (Figure 1), lists all possible connections a module can support on the FNB, displays the current connection, and allows you to change the connection. Figure 1. 9A...
Page 7 - FNB Resource Configuration Screen Fields; Changing the Current FNB Connection; Return
5 9A426-01/9A426-02 Module Specific Information FNB Resource Configuration Screen Fields The following information briefly explains each FNB Resource Configuration Screen field. Current FDDI Con: Displays the current connections of the selected module to theSmartSwitch 9000 FNB. Config ID Displays a...
Page 8 - Connection Table Screen
9A426-01/9A426-02 Module Specific Information 6 Connection Table Screen The 9A426-01/9A426-02 Connection Table Screen (Figure 2), displays the currently configured connections on the module. Figure 2. 9A426-01/9A426-02 Connection Table Screen SmartSwitch 9000 Local Management 9A426-02 Connection Tab...
Page 9 - Connection Table Screen Fields; Number of virtual circuits that are currently open for this port.; default
7 9A426-01/9A426-02 Module Specific Information Connection Table Screen Fields The following information briefly explains each Connection Table Screen field. ATM Port Current Connections Number of virtual circuits that are currently open for this port. ELAN: Name of the ELAN to which this client is ...
Page 10 - Selects the ELAN for which connections are to be displayed.; ELAN; left corner of the screen), then press the; Selects a specific ATM port.; Space Bar; Displaying the Add/Delete Entry Screen; then press the
9A426-01/9A426-02 Module Specific Information 8 • LLC EncapsulationLogical Link Control for Bridged Protocols. You can choose this encapsulation type for PVCs. You cannot use this encapsulation type for SVCs. LLC Encapsulation inserts an LLC SNAP header for each legacy LAN network type that is being...
Page 11 - Add/Delete Entry Screen
9 9A426-01/9A426-02 Module Specific Information Add/Delete Entry Screen The 9A426-01/9A426-02 Add/Delete Entry Screen (Figure 3), is used to add or delete a PVC on the module. Figure 3. 9A426-01/9A426-02 Add/Delete Entry Screen SmartSwitch 9000 Local Management 9A426-02 ADD/DELETE ENTRY Module Name:...
Page 12 - Add/Delete Entry Screen Fields; Displays the types of ATM adaptation layer used on this VCC. Use the; Space; to select one of the following choices:
9A426-01/9A426-02 Module Specific Information 10 Add/Delete Entry Screen Fields The following information briefly explains each Add/Delete Entry Screen field. VPI Displays the Virtual Path Identifier number of the connection you want to add or delete. VCI Displays the Virtual Channel Identifier numb...
Page 14 - LEC Administration Screen
9A426-01/9A426-02 Module Specific Information 12 LEC Administration Screen The 9A426-01/9A426-02 LEC Administration Screen (Figure 4), is used to add, delete, modify, or view LAN Emulation attributes on the module. Figure 4. 9A426-01/9A426-02 LEC Administration Screen SmartSwitch 9000 Local Manageme...
Page 15 - LEC Administration Screen Fields; The name of the ELAN to which this client is joined.
13 9A426-01/9A426-02 Module Specific Information LEC Administration Screen Fields The following information briefly explains each LEC Administration Screen field. Configure LEC (Toggle) Specifies whether the LAN Emulation Client should auto-configure the next time it is started. Use the Space Bar to...
Page 16 - Selects the ELAN for which attributes are to be displayed.; Adding an ELAN; Use the arrow keys to highlight CREATE, then press the Return key.; Use the arrow keys to move to the ELAN Name field.
9A426-01/9A426-02 Module Specific Information 14 If there are currently no active ELANs, then all choices on the ATM Specific Configuration Screen will result in the message “No ACTIVE ELAN present”. You can only access the Connection Table screen and the LEC Administration screen. You cannot access...
Page 18 - LEC Properties Screen
9A426-01/9A426-02 Module Specific Information 16 LEC Properties Screen The 9A426-01/9A426-02 LEC Properties Screen (Figure 5), displays information about the various LAN Emulation components. Figure 5. 9A426-01/9A426-02 LEC Properties Screen SmartSwitch 9000 Local Management 9A426-02 LEC PROPERTIES ...
Page 19 - LEC Properties Screen Fields; Displays the ATM address of this LEC entry.
17 9A426-01/9A426-02 Module Specific Information LEC Properties Screen Fields The following information briefly explains each LEC Properties Screen field. LECS ATM Address Displays the ATM address of the LECS (if it is known), or the empty string. LECS Configuration Direct VPI/VCI A bi-directional, ...
Page 20 - SVC Signalling Screen
9A426-01/9A426-02 Module Specific Information 18 SVC Signalling Screen The 9A426-01/9A426-02 SVC Signalling Screen (Figure 6), is used to change the type of SVC signalling and LAN Emulation used by the module. Figure 6. 9A426-01/9A426-02 SVC Signalling Screen SmartSwitch 9000 Local Management 9A426-...
Page 21 - SVC Signalling Screen Fields; Bar to select one of the following:; ILMI OFF
19 9A426-01/9A426-02 Module Specific Information SVC Signalling Screen Fields The following information briefly explains each SVC Signalling Screen field. Signalling/LAN Emulation Type (Toggle) Displays the types of signalling and LAN Emulation to be used by the module. Use the Space Bar to select o...
Page 22 - Diagnostics Screen
9A426-01/9A426-02 Module Specific Information 20 Diagnostics Screen The 9A426-01/9A426-02 Diagnostics Screen (Figure 7), is used to enable or disable extended diagnostics for the module. Figure 7. 9A426-01/9A426-02 Diagnostics Screen SmartSwitch 9000 Local Management 9A426-02 Diagnostics Module Name...
Page 23 - Use the arrow keys to highlight the Extended Diagnostics: field.
21 9A426-01/9A426-02 Module Specific Information Diagnostics Screen Field The following information briefly explains the Diagnostics Screen field. Extended Diagnostics (Toggle) Enables or disables Extended Diagnostics for the ATM module. Use the Space Bar to select one of the following choices: • EN...
