Bushnell 78.9565 - Manual
Bushnell 78.9565 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – STANDARD EQUIPMENT; ELESCOPE ASSEMBLY; Attach Telescope and Finderscope; Note: Before assembling tripod; See finderscope page.; Attach Accessory Tray
- Page 3 – Attach Control Cables, Counterweight and Eyepieces; Counterweight; HOW TO USE YOUR NEW TELESCOPE; appear; Using the Penta Mirror Assembly:; Insert
- Page 4 – Post until it clicks into place.; Aligning and Using Red Dot Finderscope; same object being viewed in main telescope tube.; Plastic Insert; Adjustment
- Page 5 – Balancing the Telescope; the
- Page 6 – UNDERSTANDING THE EQUATORIAL MOUNT; Never Look Directly At The Sun With Your Telescope; Enjoying Your New Telescope
- Page 7 – Helpful Hints; Using your telescope out a window is NEVER recommended.
- Page 8 – ANSWERS TO COMMONLY ASKED QUESTIONS
- Page 10 – Telescope LIFETIME LIMITED WARRANTY; ©2001 Bushnell Performance Optics
565 x 60 Refractor Telescope
Model 78-9565
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
STANDARD EQUIPMENT • Refractor Telescope Assembly • Equatorial Mount • Variable Height-Aluminum Tripod • Exclusive Penta Mirror Assembly • 8mm, 12.5mm, 20mm focal length - Eyepieces. • Red Dot Finderscope • Accessory Tray • 1.5x Erecting Lens • 3x Barlow • Hardware Packet—(3) Tripod Bolts with Wing ...
5. Attach Control Cables, Counterweight and Eyepieces Locate the Fine Adjustment Cables (14). Loosen the silver screws located at the end of the Fine Adjustment Cables and attach the Fine Adjustment Cables to the two silver posts found on the Equatorial Mount . The first post is located just above t...
Please find below an image depicting how to attach the red dot finderscope and an image depicting a fully-attached unit. How-To-Attach: Place Finderscope Cylindrical Groove over Cylindrical Finderscope Mount Post until it clicks into place. Aligning and Using Red Dot Finderscope Remove plastic inser...