Bush Hog Utility Vehicle Workshop - Manual
Bush Hog Utility Vehicle Workshop – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Tie Rod End Slotted Nut; SPECIFICATIONS; TYPE: RACK AND PINION
- Page 3 – TOOLS; CAUTION; Needed for
- Page 4 – DESCRIPTION; STEERING; The suspension struts are described in the Suspension; Figure 1
- Page 5 – REPAIR; INSPECTION; Using a floor jack, lift the machine and support with jack stands.; Figure 2
- Page 6 – Using a ball joint tool (Figure 3) remove tie rod ends from the struts.
- Page 7 – Remove three capscrews and hex nuts securing the rack and
- Page 9 – INSTALLATION; Securely tighten the tie rod end lock nuts.; Tie Rod Installation
- Page 10 – Shifting Cable Housing; Place the shifting cable housing on the mounting bracket with a; STEERING SHAFT INSTALLATION; Install hub in the center of the steering wheel.
- Page 11 – ADJUSTMENT; Make note of the distance.; Loosen the tie rod end lock nuts.; Steering Tire Alignment
BUSH HOG
®
UTILITY VEHICLE WORKSHOP MANUAL – SECTION 7: STEERING SYSTEM
7-
1
SECTION 7 – STEERING SYSTEM
SPECIFICATIONS ........................................................................... 7-2
Type: Rack and Pinion ............................................................. 7-2
TOOLS ........................................................................................... 7-3
SAFETY FIRST ............................................................................... 7-3
DESCRIPTION ................................................................................ 7-4
Steering .................................................................................... 7-4
REPAIR ........................................................................................... 7-5
INSPECTION ............................................................................ 7-5
REMOVAL ................................................................................ 7-5
RACK AND PINION REMOVAL ......................................... 7-5
STEERING WHEEL REMOVAL ........................................ 7-8
STEERING SHAFT REMOVAL ......................................... 7-8
INSTALLATION ............................................................................... 7-9
RACK AND PINION INSTALLATION ................................. 7-9
STEERING SHAFT INSTALLATION ................................. 7-10
STEERING WHEEL INSTALLATION ................................ 7-10
ADJUSTMENT ................................................................... 7-11
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
BUSH HOG ® UTILITY VEHICLE WORKSHOP MANUAL – SECTION 7: STEERING SYSTEM 7- 2 TORQUE SPECIFICATIONS: COMPONENT TORQUE Tie Rod End Slotted Nut 30 lbs. ft. (41 Nm) Lug Nuts 50 lbs. ft. (68 Nm) STEERING WHEEL STEERING SHAFT BRACKET TIE ROD END TIE ROD END STEERING SHAFT ASSEMBLY RACK & PINION ASSEMB...
BUSH HOG ® UTILITY VEHICLE WORKSHOP MANUAL – SECTION 7: STEERING SYSTEM 7- 3 TOOLS SAFETY FIRST CAUTION N e v e r w o r k u n d e r n e a t h a r a i s e d v e h i c l e w i t h o u t a d e q u a t e s u p p o r t . U s e j a c k s t a n d st o p r e v e n t t h e v e h i c l e f r o m f a l l i n g...
BUSH HOG ® UTILITY VEHICLE WORKSHOP MANUAL – SECTION 7: STEERING SYSTEM 7- 4 DESCRIPTION STEERING The UTV rack and pinion steering (Figure 1) is common in manyautomotive systems. The rack is a flat gear that extends outwardfrom both ends of the assembly. A tie rod end connects the rack tothe suspens...
