Bunn G9T HD - Manual
Bunn G9T HD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – amount and grind from the factory setting.; USER NOTICES; WARNING
- Page 4 – OPERATING CONTROLS
- Page 5 – Corporation at
- Page 6 – COFFEE GRINDING; Insert the funnel into the funnel rails and push until it stops.; ADJUSTMENTS; Burr Adjustment; Unplug the grinder and empty all beans from the hopper.
- Page 7 – Timer Adjustment; Unplug the grinder and remove the lower front inspection panel.; APPROXIMATE TIMER SETTINGS IN SECONDS; WEIGHT FINE DRIP REGULAR
G9 HD
G9T HD
INSTALLATION & OPERATING GUIDE
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts
Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at
www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and
manual updates. For Technical Service, contact Bunn-O-Matic Corporation at 1-800-286-6070.
10171.0000S 04/12 © 1986 Bunn-O-Matic Corporation
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 3 CONTENTS Introduction ---------------------------------------------------- 3 User Notices --------------------------------------------------- 3 Electrical Requirements -------------------------------------- 4 CE Requirements ---------------------------------------------- 4 Initial Set Up ----...
Page 4 URN O F F S T A R T ON CARAFE P1300 Batch Selector Switch (Optional) URN - Switching to this position allows the correct amount of beans to be dispensed when grinding a large batch. CARAFE - Switching to this position allows the correct amount of beans to be dispensed when grinding a small ba...
Page 5 CLEANING WARNING - Unplug the grinder before the removal of any panel or grind chamber-housing parts. 1. Clean all exterior surfaces using a damp cloth rinsed in any mild, nonabrasive, liquid detergent. Care should be taken not to scratch the grinder with any abrasive material. 2. Empty all b...
