Bunn G2 TRIFECTA - Manual
Bunn G2 TRIFECTA – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – FAILURE TO COMPLY RISKS EQUIPMENT; WARNING; PLEASE DO NOT POUR GROUND; PLEASE CLOSE LID; USER NOTICES; G2 trifecta; Coffee Mill
- Page 4 – OPERATING CONTROLS; Grind Selector; CE REQUIREMENTS; • Machine rated IXP1.; ELECTRICAL REQUIREMENTS; Models
- Page 5 – CLEANING; WARNING - Prior to cleaning the grind chamber, unplug the grinder.; BASE RELOCATION; Corporation at
INSTALLATION & OPERATING GUIDE
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts
Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at
www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and
manual updates. For Technical Service, contact Bunn-O-Matic Corporation at 1-800-286-6070.
43254.0000D 11/12 ©2010 Bunn-O-Matic Corporation
G1,G2,G3
& G2
trifecta
®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 SPECIAL R EG UL AR EL EC P ER C AUTOMAT IC DRIP FINE ES PR ES SO TURKISH TURKISH CO AR SE R EG UL AR E LEC PER K DRIP AUTO-DRIP F INE ES PR ES SO 20545-0000D 01/04 © 1990 Bunn-O-Matic Corporation READ THE ENTIRE OPERATING MANUAL INCLUDING THE LIMIT OF WARRANTY AND LIABILITY BEFORE BUYING OR USING ...
4 INITIAL SET-UP CAUTION - Unplug the grinder throughout the initial set-up. 1. Open the top lid. Clear all foreign objects and shipping materials from the hopper compartment and the entrance to the grind chamber. 2. Install filler plate. 3. The grinder can now be plugged-in and put into service. OP...
5 CLEANING WARNING - Unplug the grinder before the removal of any panel or grind chamber-housing parts. 1. Clean all exterior surfaces using a damp cloth rinsed in any mild, nonabrasive, liquid detergent. Care should be taken not to scratch the grinder with any abrasive material. 2. Empty all beans ...
