Bunn 1SH - Manual
Bunn 1SH – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – USER NOTICES; WARRANTY; workmanship for two years from the date of installation.
- Page 3 – WARNING
- Page 4 – CIRCUIT BREAKER; SERVICE
- Page 6 – RECTIFIER
- Page 7 – TRANSFORMER; The transformer(s) is located in the stand housing
- Page 9 – SINGLE PHASE; SINGLE PHASE
OPERATING & SERVICE MANUAL
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
28342.0000D 8/00 ©1997 Bunn-O-Matic Corporation
BUNN
®
1SH & 2SH
STAND
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 00986.0000 USER NOTICES The notice on the stands should be kept in good condition. Replace if unreadable or damaged. WARRANTY Bunn-O-Matic Corp. (“Bunn”) warrants the equipment manufactured by it to be commercially free from defects in material and workmanship existing at the time of manufact...
Page 3 ELECTRICAL REQUIREMENTS The stands have an attached cordset and requires 2-wire grounded service rated 120 volts ac, single phase, 90 watts total for the 1SH, 180 watts total for the 2SH, or 2-wire grounded service rated 230 volts ac, single phase,90 watts total for the 1SH, 180 watts total f...
Page 4 CIRCUIT BREAKER Location The circuit breaker(s) is located on the upper part of the receptacle bracket just above the springcontact receptacle(s) assembly. FIG. 2 CIRCUIT BREAKER P1402 SERVICE This section provides procedures for testing and replacing various major components used in thesesta...
