Buhler 25 Series - Manual

Table of Contents:

• Page 4 – 5 Series Rotary Tiller; PARTS LISTS; Gearbox
• Page 5 – WARRANTY POLICY; Any labor subject to warranty; must; be authorized by Buhler Manufacturing. The labor rate for; GOVERNMENT LEGISLATION:; This warranty does not apply to rentals
• Page 6 – INTRODUCTION; for a complete list of dealers in your area.
• Page 7 – SAFETY; he safety alert symbol means...; CAUTION
• Page 8 – GENERAL SAFETY; - Protective shoes with slip resistant soles; OPERATING SAFETY
• Page 9 – SERVICE AND MAINTENANCE SAFETY; keep service area clean and dry; STORAGE SAFETY
• Page 10 – SAFETY SIGN LOCATIONS – cont’d.
• Page 12 – PRE-OPERATION CHECKLIST; Use only a tractor of adequate power and weight to pull the machine.
• Page 13 – OPERATION
• Page 14 – EQUIPMENT MATCHING; Use Table 1 as a guide in selecting the tractor horsepower; Table 1 Horsepower vs. Width; Do not exceed the recommended horsepower levels. The use; Load Sensing Hydraulics:
• Page 15 – DRIVELINE DIMENSION; When cutting the driveline, follow this procedure:
• Page 16 – DRIVELINE DIMENSION – cont’d.; Use a file to remove the burrs from the edges that were cut.
• Page 18 – FIELD OPERATION; Before going to the field review Transporting Section.
• Page 21 – TRANSPORTING; Be sure all bystanders are clear of the machine.; Table 2 Speed vs. weight Ratio
• Page 22 – STORAGE
• Page 23 – THEORY OF OPERATIONS
• Page 26 – SERVICING INTERVALS – cont’d.; Add as required; Annually
• Page 28 – SHEAR BOLT
• Page 29 – CLUTCH MAINTENANCE; Disengage clutch by turning in the four socket set screws.
• Page 31 – BOLT TORQUE
• Page 44 – DIVISION LOCATIONS; CANADIAN WAREHOUSES; Buhler Manufacturing