BT Verve 100 - Manual

Verve 100 – Edition 5 – 18.8.00 – 3250

Digital Cordless Telephone

User guide

Verve 100

This equipment is not designed for making emergency telephone

calls when the power fails. Alternative arrangements should be made for

access to emergency services.

This product is intended for connection to analogue public switched

telephone networks and private switchboards in the United Kingdom.

Verve 100 – Edition 5 – 18.8.00 – 3250

Offices worldwide

The telecommunications ser vices described in this publication
are subject to availability and may be modified from time to time.
Ser vices and equipment are provided subject to British Telecommunications
plc’s respective standard conditions of contract. Nothing in this publication
forms any par t of any contract.

Touchtone

™ is a registered trade mark of

British Telecommunications plc in the UK.

© British Telecommunications plc 2000.
Registered Of fice: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed by: The Ar t & Design Par tnership Limited.
Printed in Germany. Ver ve 100. Issue 1 (8/00) 4

Printed on paper which meets international environmental standards.

Siemens number: A31008-G100-P100-1-7619

CE compliant to
89/336/EEC (EMC Directive) &
73/23/EEC (Low Voltage Directive)

0682

Additional features

To adjust the ringer volume

There are 3 volumes to choose from, with 1 being
the lowest.

Press the

SET

button, then the

5

button.

You will hear the cur rent ringer volume.

KEYPAD

Use the keypad to enter the setting you want

1-3

.

Press the

SET

button to confirm.

Using the memory

You can store up to 10 numbers in the memor y, each up to 22
digits long, which can then be speed dialled. Stored numbers
can include settings made with the

✱

and

#

buttons. You can

also enter a Pause by holding down the R (Recall) button.

To speed dial a stored number

Press the

MEMORY

button.

0-9

Enter the memor y location number

0-9

under

which the number is stored.

Press the

HANDSET

button. The number is dialled

automatically.

7

Verve 100 – Edition 5 – 18.8.00 – 3250

To store a number in the memory

Press the

SET

button.

Press the

MEMORY

button.

0-9

Enter a number between

0-9

under which you

want to store the number.

KEYPAD

Enter the telephone number to be stored.

Press the

SET

button to confirm.

You will hear a confirmation beep.

5

IKL

To adjust the earpiece volume

The volume of received calls can be set to 3
dif ferent levels. 1 is the lowest.

Press the

SET

button, then the

0

button.

KEYPAD

Select a level

1-3

using the keypad.

Press the

SET

button to confirm.

To switch the keypad lock on and off

You can lock the keypad so that it cannot be used
accidentally while car r ying it around.

You are still able to receive calls.

Press and hold down the

#

button until the display

shows:

The keypad is now locked and you cannot dial out.
Incoming calls can be answered as normal by
pressing the

HANDSET

button.

To unlock the keypad press and hold the

#

button

until the display returns to standby.

To adjust the ringer melody

There are 2 ringer melodies to choose from.

Press the

SET

button, then the

6

button.

You will hear the cur rent ringer melody.

KEYPAD

Select melody

1

or

2

using the keypad.

Press the

SET

button to confirm.

8

Verve 100 – Edition 5 – 18.8.00 – 3250

#

#

9

Verve 100 – Edition 5 – 18.8.00 – 3250

Problem

Possible causes

Solution

Registration did
not work.

No display.

No reaction when
pressing keypad
buttons.

No radio
connection to the
base station
icon flashing.

The batter y is not
suf ficiently
charged. Handset
and base station
were not prepared
for registration.

The batter y is not
charged.

The keypad is
locked.

The handset is
outside the base
station range.

The handset is not
registered.

The base station is
not active.

Charge the batter y
for 16 hours (see
pages 4 and 5).
Remove and then
re-inser t the power
supply unit.

Charge the batter y
or replace it (see
page 4).

Press

for 1

second.

Move closer to the
base station.

Register the handset
(see page 5).

Check the power
supply unit at the
base station.

#

Within the 12-month guarantee period:

If you experience a problem with your product you should
contact the Helpline on

08457 908070

. Calls are charged at

local call rates. If the problem is not remedied, you will be
advised to return your product to the helpline.

Outside the 12-month guarantee period:

If your product needs repair after the guarantee period has
ended, the repair must meet the approval requirements for
connection to the telephone network. We recommend that
you call the Helpline on

08457 908070

and ask for details of

our recommended repair agents.

Guarantee

General information

Help

Your Ver ve 100 can be connected to compatible switchboards.
If in doubt, please contact your switchboard supplier.

Your Ver ve 100 is pre-set to TONE dialling. You will hear a
tone beep each time you dial a number. Tone dialling is suitable
for all modern digital exchanges. If you cannot make a call with
TONE dialling you may need to switch to PULSE dialling.

10

Verve 100 – Edition 5 – 18.8.00 – 3250

Technical information

Switchboard compatibility

How many handsets can you have?

All items of telephone equipment have a Ringer
Equivalence Number (REN) which is used to calculate the
number of items that may be connected to any one
telephone line. The Ver ve 100 has a total REN of 1. Any
other instr ument provided by BT may be assumed to have
a REN of 1 unless stated other wise. A total REN of 4 is
allowed per telephone line. (For example: if the Ver ve 100
is used in conjunction with three extension telephones,
each with a REN of 1, then the total REN = 4.)

R&TTE

This product complies with the R&TTE Directive 99/05/EC.

To set the dialling mode

Press the

HANDSET

button.

Press the

SET

button.

Press the

1

button, then the

0

button.

Press the

4

button to set PULSE dialling.

Press the

SET

button to confirm.

Press the

HANDSET

button to return to standby.

If you wish to return to TONE dialling, press

2

instead of

4

.

1

0

4

GHI

If you have to return your product

Pack the base station and handset securely, preferably in the
original packing. All par ts must be returned, including line
cords, power supply unit and original batteries. We cannot
take responsibility for goods damaged in transit.