Page 2 - Welcome...; 5K Colour display with back light and choice of 5 wallpapers.
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Welcome… to your BT Hub Phone 1010 Digital Cordless Handset • Hi-Definition Sound • 65K Colour display with back light and choice of 5 wallpapers. • Keep track of incoming calls with the 50 number calls list. • 150 Entry phonebook, with the facility to st...
Page 4 - In this guide; Getting started
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 In this guide Getting started Location . . . . . . . . . . . . . . . . . . . . . . .7Setting up the handset . . . . . . . . . . . .7Standby display . . . . . . . . . . . . . . . . . .12 Getting to know your phone Handset buttons . . . . . . . . . . . . . ...
Page 13 - Getting to know your phone; Handset buttons
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 1 3 Getting to know your phone 1 3 Redial/Vol/Scroll Up/Pause In standby, press and release to access the redial list, page 21 . In standby, press and hold to enter a pause (during pre-dialling), page 25 . During a call, press to increase the earpiece vol...
Page 14 - Navigating the menus; Menu
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Navigating the menus Your BT Hub Phone 1010 handset has a menu system toguide you through the handset and setting options.Refer to the menu map on the next page for theavailable options. When the handset is displaying the idle screen: 1. In standby press ...
Page 16 - Switching the handset power on; Make an external call; Using the phone
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Switching the handset power off Press and hold . Switching the handset power on Press and hold . Make an external call 1. Press listen for the dial tone then dial the number. Preparatory dialling (pre-dial) To see the number on the display before dialling...
Page 17 - Handsfree calling
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Receiving calls 1. Press to answer the call or, if the handset is on the base, simply lift it and speak. If you have subscribed to your network’s Caller Displayservice, the caller’s number, or name (if an exactname/number match is found in the phonebook) ...
Page 19 - Keypad lock
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 1. Press and the ringer will switch off. Secrecy During a call, you can mute the microphone so that youcan talk to someone nearby without your caller hearingyou. 1. During your call, press Secrecy . SECRECY is displayed and your caller cannot hear you. 2....
Page 20 - To switch key lock on:; KEYPAD LOCKED; Redial
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 To switch key lock on: 1. Press and hold . KEYPAD LOCKED and the icon is displayed. To switch key lock off: 1. Press Unlock . UNLOCK CONFIRM? is displayed. 2. Press Yes to unlock the handset. Redial Your handset automatically saves the last 20 numbersyou ...
Page 24 - Store a phonebook entry; NAMES; ADD ENTRY; Phonebook
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Store a phonebook entry You can use the phonebook to store up to 150 entries.For each entry you can store a name together withhome, work and mobile numbers. Stored numbers canbe up to 20 digits and stored names up to 16 characterslong. Phonebook entries a...
Page 26 - Dial a phonebook entry
Pressing will scroll forward alphabetically through thephonebook entries. Pressing will scroll backwards alphabetically through thephonebook entries. Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Button Lower Case Upper Case p q r s 7 ß / P Q R S 7 / t u v 8 U ú ü : T U V 8 Ú Ü : w x y z 9 ) W X Y Z ...
Page 28 - EDIT ENTRY
To change individual characters You cannot overtype digits orcharacters, you can only clear andinsert. New digits or charactersappear after the cursor. Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 3. Press OK to display the entry selected. Press Options then use or to scroll and display EDIT ENTRY ....
Page 30 - Delete all phonebook entries
If you decide not to delete allphonebook entries, press No to cancel. Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Delete all phonebook entries 1. Press Menu to access the menu. 2. Press or to scroll and display NAMES and press OK to select. 3. Press or to display DELETE ALL PHONEBOOK and press OK t...
Page 31 - Caller Display and the calls list
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 If you subscribe to a Caller Display service you can seeyour caller’s number on your handset’s display (unless ithas been withheld) before you answer the call. The calls list will store up to 50 numbers. When the callslist is full, a new call replaces the...
Page 32 - Back
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Press or to scroll and display CALLS LISTS and press OK . RECEIVED CALLS is displayed, press OK to display the calls list. From standby: Press to access the Calls list. 2. The most recently received call details are displayed. Press or repeatedly to scrol...
Page 33 - DELETE
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Save a calls list entry to the phonebook 1. Press to access the Calls list. The most recently received call details are displayed. 2. Press or repeatedly to scroll to the entry you want. 3. Press Options . SAVE NUMBER is displayed, press OK to confirm. 4....
Page 34 - Delete all calls list entries
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 4. Press OK to confirm. CALL DELETED is displayed. Delete all calls list entries 1. Press Menu to access the menu. 2. Press or to scroll and display CALLS LISTS and press OK . 3. Press or to display DELETE CALLS LIST and press OK . 4. RECEIVED CALLS is di...
Page 35 - Call Waiting; Speak to a second caller
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Call Waiting Providing you have subscribed to your network provider’sCall Waiting service, you will hear a soft beep every 5seconds if an incoming call arrives while you are alreadyon the phone. This beep is not audible to the person youare speaking to. T...
Page 36 - BT Calling Features
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 By using the BT globe menu your BT Hub Phone 1010gives you easy access to a range of BT features. These are: • 1571 • Helpdesk • BT 118 500* • Withhold my number • Display my number 1571 1. Press Menu to access the menu. 2. Press or to scroll and display ...
Page 40 - Adjust the display contrast; Handset settings
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 You can choose a range of settings to suit your personalpreferences. Adjust the display contrast You can lighten or darken the contrast of the display tomake it easier for you to see according to the lightingconditions where you are using the handset. 1. ...
Page 41 - Adjust the earpiece volume; HANDSET; Naming a handset; DAVE
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Adjust the earpiece volume There are 5 volume levels to choose from. 1. Press Menu to access the menu. 2. Press or to scroll and display HANDSET and press OK . 3. Press or until EAR VOLUME is displayed and press OK . 4. Press or to scroll and select the v...
Page 42 - Display wallpaper
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 2. Press or to scroll and display HANDSET and press OK . 3. Press or until HANDSET NAME is displayed and press OK . 4. The current handset name is displayed and you are now in edit mode. Enter a new name for your handset usingthe keypad and press OK to co...
Page 43 - PICTURE; Menu background colour
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 3. Press or until PICTURE is displayed and press OK . 4. The current picture is highlighted in the list. Press or to scroll through the different wallpapers and press OK to view them. 5. Press Use to select a wallpaper or Back to go back to the pictures l...
Page 45 - Beep tones; To switch key beeps On/Off
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Beep tones Your BT Hub Phone 1010 handset emits beeps to alertyou to certain situations. You can set the handset tobeep: • To beep as confirmation each time a handset button ispressed (key beeps). • If the battery is low. • If you go out of range of the b...
Page 46 - To switch low battery beeps On/Off
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 4. Press or until KEY BEEP is displayed and press OK . 5. Press or to select ON or OFF then press OK . SAVED is displayed. 6. Press Back repeatedly to return to the idle screen. To switch low battery beeps On/Off During a call, if the battery charge level...
Page 47 - To switch out of range beeps On/Off
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 5. Press or to select ON or OFF then press OK . SAVED is displayed. 6. Press Back repeatedly to return to the idle screen. To switch out of range beeps On/Off During a call, if the handset moves out ofcommunication range with the base you will hear awarni...
Page 48 - Handset ringer melody and volume; To change the external call ringer volume
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 6. Press Back repeatedly to return to the idle screen. Handset ringer melody and volume You have a choice of 9 polyphonic melodies and 1polytone melody and 5 volume levels (or you can switchthe ringer OFF). You can select a different ringer melodyfor exte...
Page 49 - INTERNAL CALLS
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 5. Press or to scroll through the volume levels. Press OK when you reach the volume you want. To change the ringer melody 1. Press Menu to access the menu. 2. Press or to scroll and display MELODY and press OK . 3. music icon is displayed, press OK to con...
Page 50 - to return to the idle screen.
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 7. When you hear the melody you want, press OK to select. RINGTONE SAVED is displayed. 8. Press Back repeatedly to return to the idle screen. Handset settings 5 0 Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 50
Page 51 - System PIN; To change the System PIN code; Base settings
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Reset your BT Hub Phone 1010 to the defaultsettings 1. Press Menu to access the menu. 2. Press or to scroll and display BASE SETTINGS and press OK . 3. Press or until DEFAULT SETTINGS is displayed and press OK . 4. Enter the PIN code and press to confirm....
Page 53 - Setting the time; TIME SETTINGS; Time settings
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Setting the time You can set the time manually if you have not subscribedto a Caller Display service. 1. Press Menu to access the menu. 2. Press or to scroll and display TIME SETTINGS and press OK . 3. Press or until SET DATE & TIME is displayed and p...
Page 54 - Alarm; To set an alarm
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Alarm You can use your BT Hub Phone 1010 handset as analarm clock. You can set a single alarm or set an alarm tosound at the same time each day. When an alarm is setthe icon will be displayed when in standby mode. To set an alarm 1. Press Menu to access t...
Page 56 - to return to standby.
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 5. Press or until OFF is displayed and press OK . DONE is displayed. 6. Press Back repeatedly to return to standby. To silence the alarm When the alarm time is reached, the alarm will soundand ALARM will be displayed. The alarm will ring for 1 minute unle...
Page 57 - Using additional handsets
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 You can register up to 5 handsets with your BT HubPhone 1010 base and your BT Hub Phone handset canbe registered with up to 4 bases. With 2 or morehandsets, you can make internal calls, page handsetsand transfer external calls between your handsets. If yo...
Page 59 - Internal calls; Making internal calls
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Internal calls Making internal calls You can make internal calls between two handsetsregistered to your BT Hub Phone 1010 base. 1. Press INT . 2. Enter the other handset number using the keypad (e.g. ). The called handset will ring and show the calling ha...
Page 60 - INT
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Paging You can alert handset users that they are wanted orlocate a missing handset. Paging calls cannot beanswered by a handset. 1. Press PAGE ( for more than 3 seconds) on the Hub. Any registered handset(s) will ring for 30 seconds. 2. Press any button o...
Page 61 - Selecting a base to use
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 If the other handset does not answer, press INT to talk to the caller again. Selecting a base to use If your handset has been registered to more than onebase you can select which one it uses. Alternatively, youcan select AUTOMATIC and the handset will aut...
Page 63 - Automatic software upgrade; A NEW VERSION IS; Software upgrades
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Automatic software upgrade Your BT Hub checks the network every 24 hours forsoftware updates and if new software versions areavailable it sends a message to any registered handsetsneeding to be upgraded. When the handset display shows A NEW VERSION IS AVA...
Page 64 - Manual upgrade
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Manual upgrade If new software is available and you selected to upgradelater, you can manually upgrade the software at any timeusing the handset menu. 1. Press Menu to access the menu. 2. Press or to scroll and display HANDSET and press OK . 3. Press or u...
Page 65 - Rescue mode
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Rescue mode If the upgrade was unsuccessful, or if the handset waslifted from the charger during the upgrade for more than90 seconds, the user can initiate a new upgrade of thehandset software from the web interface of the hub. Software upgrades 6 5 Hub P...
Page 66 - Help
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Many common problems are caused by the telephone and power cables being incorrectlyconnected, not connected at all or the power being turned off. Please check that your BTHub Phone 1010 has been correctly set up (see page 7) before ringing the BT Hub Phon...
Page 69 - Safety; General information
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Safety General • Only use the power supply included with theproduct. Using an unauthorised power supply willinvalidate your guarantee and may damage thetelephone. The item code for the base mainspower supply is 027263. • For the handset use only approved ...
Page 70 - Product disposal instructions
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 household polish as this will damage the product.Never use a dry cloth as this may cause a staticshock. Environmental • Do not expose to direct sunlight. • The product may heat up when the batteries arebeing recharged. This is normal. However, werecommend...
Page 71 - Guarantee
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Product disposal instructions forbusiness users Business users should contact their suppliers andcheck the terms and conditions of the purchasecontract and ensure that this product is notmixed with other commercial waste for disposal. Guarantee Your BT Hu...
Page 72 - Technical information
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 For your records Date of purchase: Place of purchase: Serial number: For guarantee purposes proof of purchase isrequired so please keep your receipt. Enter your base PIN here: [ / / / ] (See page 51 for more information) Within the 12 month guarantee peri...
Page 74 - Offices worldwide
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451 Offices worldwide The telecommunications services described in this publication aresubject to availability and may be modified from time to time. Services and equipment are provided subject to BritishTelecommunications plc’s respective standard conditions...
