Page 2 - Introduction; International ENERGY STAR
1 Introduction Thank you for purchasing the PT-9700PC/PT-9800PCN.The PT-9700PC/PT-9800PCN (hereafter, referred to as “printer”) is a label printer that enables you to easily print custom labels after it is connected to a computer.This manual contains various precautions and basic procedures for usin...
Page 4 - What is the length of the Warranty Periods:
3 Brother ® Two Year Limited Warranty (USA Only) Who is covered: • This limited warranty (“warranty”) is given only to the original end-user/retail purchaser(referred to in this warranty as “OriginalPurchaser”) of the accompanying Product,consumables and accessories (collectivelyreferred to in this ...
Page 6 - Important Information
5 Important Information Should you have questions, or need information about your Brother Product, we have a variety of supportoptions for you to choose from: Customer Service1-800-255-0415 Customer Service1-303-460-1628 (fax) World Wide Webwww.brothermobilesolutions.com Supplies / Accessories1-800-...
Page 7 - Safety precautions; The symbols used in this manual are as follows:; WARNING; AC adapter
6 Safety precautions To prevent injury and damage, important notes are explained using various symbols.The symbols and their meanings are as follows: The symbols used in this manual are as follows: WARNING Tells you what to do to avoid the risk of injury. CAUTION Tells you about procedures you must ...
Page 8 - Printer; CAUTION; Tape cutter
7 Printer Follow these guidelines to avoid fire, damage, electric shock, and choking. Do not allow the printer to get wet in any way. Do not touch any metal parts near the print head. The print head becomes very hot during use and remains very hot immediately after use. Do not touch it directly with...
Page 9 - General Precautions
8 General Precautions ● The printer may malfunction if left near a television, radio, etc. Do not install the printer near any printer that will cause electromagnetic interference. ● Do not use the printer in any way or for any purpose not described in this manual. Doing so may result in accidents o...
Page 10 - Table of contents; Serial interface settings (Windows
9 Table of contents Unpacking the printer .....................................................................................................10 General description .........................................................................................................11 LED display .................
Page 11 - Unpacking the printer; Connect to the power supply cord.
10 Unpacking the printer Open the box and confirm that the following items are included. If any item is missing or damaged, please contact the retail outlet where the printer was purchased. ■ PT-9700PC/PT-9800PCN Printer (PT-9700PC) Printer (PT-9800PCN) ■ AC adapter Connect to the power supply cord....
Page 12 - General description; Tape compartment cover; Note
11 General description ■ PT-9700PC ■ PT-9800PCN Front view Rear view DC IN 24V 10 8 9 STATUS 1 2 3 456 7 Front view Rear view 1. Tape compartment cover 8. AC adapter jack 2. Label outlet 9. Serial (RS-232C) port 3. Cover release button 10.USB port 4. STATUS lamp 11.LED lamp on USB Direct Interface (...
Page 13 - LED display; LED display on printer; Lamp condition
12 LED display The condition of the printer can be determined by LED display on printer or USB Direct Interface (PT-9800PCN only). ■ LED display on printer Lamp condition Condition Remedy Power button (green) STATUS lamp (red) Lit Not lit Printer standby condition — Flashing Not lit Receiving data —...
Page 15 - Getting ready to use your printer; Connecting the printer
14 Getting ready to use your printer Before creating labels with the printer, the following preparations are necessary. Note ● The connection procedures are different depending on the operating system running on the computer. They will also vary depending on whether a USB connection, serial connecti...
Page 16 - Connect the printer to the power source and a computer.; Turning on the printer
15 Connecting the printer Connect the printer to the power source and a computer. Connecting to the power source 1 Connect the included power supply cord to the AC adapter. 2 Insert the AC adapter connector into the AC adapter jack on the back of the printer. 3 Plug the power supply cord into an ele...
Page 17 - Connecting to a computer; Operation Systems
16 Connecting to a computer Connect the printer to a computer using the interface cables. The interface cables used to connect to a USB port, serial (RS-232C) port and LAN (10/100BASE-TX Wired Ethernet) port are different. Operation Systems Basic Setup Serial port (ESC/P and P-touch Template only) U...
Page 18 - Using the interface cables; USB cable; Use the enclosed interface cable.
17 Using the interface cables Serial (RS-232C) cables and network (Ethernet) cables are not standard accessories. Use the appropriate cable for your type of interface. ■ USB cable Use the enclosed interface cable. ■ Serial (RS-232C) cable (Windows ® only) The pin assignments for the serial cables (R...
Page 19 - Authorized tape; TZ Tapes; Standard Laminated Tape; HG Tapes; Installing the tape cassette; Install the tape cassette.; • If the ink ribbon is loose, use your
18 Installing the tape cassette This section lists the types of tape that may be used with the printer and explains the procedures to install the tape cassettes. Authorized tape The types of tape that may be used with the printer are listed below. ■ TZ Tapes Standard Laminated Tape Extra Strengt...
Page 20 - Installing the software for PT-9700PC; When using Microsoft; Standard Installation
19 Installing the software for PT-9700PC The procedure for installing the software varies depending on the OS of the computer. Install procedure is subject to change without notice. For Microsoft ® Windows ® users, see “When using Microsoft ® Windows ® ” ( → P.19). For Macintosh ® users, see “When u...
Page 21 - When using Mac OS; Below is the example for Mac OS; Start up Macintosh; . Make sure the USB cable is
20 5 Select the desired model, and then click [OK]. Follow the on-screen instructions of the driver installation. 6 When instructed, connect your printer to the computer by using the USB cable, and then turn on the printer. 7 Once the printer is detected, the driver will automatically be installed. ...
Page 23 - Installing the software for PT-9800PCN
22 Installing the software for PT-9800PCN The procedure for installing the software varies depending on the OS of the computer. Install procedure is subject to change without notice. For Microsoft ® Windows ® users, see “When using Microsoft ® Windows ® ” ( → P.22). For Macintosh ® users, see “When ...
Page 24 - For USB interface cable users
23 4 Put a check mark in the box next to the Add-in programs you want to install, and click [Next]. 5 Then, choose your connection method and click [Next]. Connection method: Local Printer with USB cable See “For USB interface cable users” ( → P.23). Brother Peer-to-Peer Network Printer Check th...
Page 25 - For network interface cable users; For shared network printer users; • If you choose “Yes, display the page”,
24 ■ For network interface cable users 6 Choose Search the network for devices and choose from a list of discovered devices (Recommended). Or enter your printer’s IP address or its node name. Click [Next]. You can find your printer’s IP address and the node name by printing out the Printer Settings ...
Page 26 - The default password is “access”.
25 ■ Installing the BRAdmin Light configuration utility The BRAdmin Light is a utility for initial setup of Brother network connected devices. It can also search for Brother products on your network, view the status and configure basic network settings, such as IP address.For more information on BRA...
Page 28 - Double click the drive where Mac OS; For Mac OS; to add your printer.; via a USB hub, it may not be
27 3 After the installation is completed and the screen shown below is displayed, click [Close]. The installation of printer driver is completed.Next, install the P-touch Editor 5.0. 4 Double click “P-touch Editor 5.0 Installer.mpkg”. The P-touch Editor 5.0 Installer starts up.Follow the on-screen i...
Page 29 - See “For USB interface cable users” (; Now you can use the printer.
28 8 Choose your connection method. Local Printer with USB cable See “For USB interface cable users” ( → P.28). Network Shared Printer (Simple network configuration) Check that LAN cable and the printer are connected.See “For network interface cable users (Simple network configuration)” ( → P.29...
Page 30 - Make the selection shown below.
29 ■ For network interface cable users (Simple network configuration) 9 Click [Add]. 0 For Mac OS ® X 10.3.9 Make the selection shown below. a Choose “Brother PT-9800PCN” from the list and click [Add] again to add the printer to the “Printer Setup Utility”/”Print & Fax”. Mac OS ® X 10.3.9 Mac OS...
Page 33 - Uninstalling the software; Uninstalling P-touch Editor
32 Uninstalling the software This section describes how to uninstall the software and printer driver. In the following steps, you will see PT-XXXX. Read “XXXX” as your printer name. For Microsoft ® Windows ® users, see “When using Microsoft ® Windows ® ” ( → P.32). For Macintosh ® users, see “When u...
Page 34 - Double-click the drive where Mac OS
33 For Windows ® 7 Choose [Fax] or [Microsoft XPS Document Writer] in the [Devices and Printers] window, and then click [Print server properties], which appeared in the menu bar. 5 For Windows ® XP Click the “Drivers” tab and choose “Brother PT-XXXX”. Then, click [Remove].Go to step 7 . For Windows ...
Page 35 - Advanced function; Printing labels at high speed or a high resolution; See “Printing at a higher speed or at a higher resolution” (; Printing using only a barcode reader without a computer; See “Printing the printer settings” (; Printing at a higher speed or at a higher resolution; Output
34 Advanced function After the printer has been connected to the computer, labels can be created and printed.This section describes how to create labels using a barcode reader and various useful print settings. ■ Printing labels at high speed or a high resolution See “Printing at a higher speed or a...
Page 36 - Distributed printing; The current printer information that
35 Distributed printing When printing a large number of labels, printing can be distributed among multiple printers. Since printing is performed at the same time, the total printing time can be reduced. 1 From the “File” menu in P-touch Editor 5.0, click “Print”. 2 Click [Properties...]. 3 Select th...
Page 37 - B.If multiple printers have been selected; In the dialog box from step; can be entered in the; appears beside the setting below
36 5 Specify the tape width to be used for printing. A.If only one printer has been selected In the dialog box from step 4 , select the printer whose setting is to be specified, and then either double-click it or right-click it and click “Settings”. From the “Set Width” drop-down list, select the ta...
Page 38 - Preparation; Connect a barcode reader to the printer.; Barcode reader connection interfaces; Barcode reader
37 BTP (Barcode Template Print) function With a barcode reader connected to the printer, labels and barcodes can easily be printed by scanning barcodes. Preset template printing ( → P.38) If a frequently used label layout is stored in the printer, identical labels can be printed simply by scanning...
Page 39 - Preset template printing; The specified label is printed.; Bill Anderson
38 ■ Preset template printing If a frequently used label layout is stored in the printer, identical labels can be printed simply by scanning barcodes. 1 Using Transfer Manager, transfer (from P-touch Editor 5.0 to the printer) the label layout to be printed. 2 When data is transferred to “Configurat...
Page 41 - Scan the “Begin printing” barcode.; Database-assisted label printing; The database file is also transferred.
40 6 Scan the barcode whose data is to be used. 7 Scan the “Begin printing” barcode. 8 The barcode is printed with the protocol and size specified in the template. ■ Database-assisted label printing First, a database field must be connected to an object in the label layout. Then, when a key barcode ...
Page 42 - ABC Company
41 4 Scan the “P-touch template command” barcode. Refer to “List of barcodes for specifying settings” ( → P.51). 5 From the “Basic settings” barcodes, scan the barcode for the parameter whose setting is to be specified. 6 Scan the “Select template” barcode, and then scan the barcodes under “For ente...
Page 43 - Click on the “Print” button.; Brother
42 Using P-touch Editor Lite LAN (PT-9800PCN and Windows ® only) P-touch Editor Lite LAN is a basic version of a label-editing tool.By copying P-touch Editor Lite LAN, installed from the enclosed CD-ROM, into a shared folder on the server, P-touch Editor Lite LAN on the server can be accessed by oth...
Page 44 - Printing the printer settings
43 Printing the printer settings The printer settings page prints a report listing the printer settings and the network settings (PT-9800PCN only). You can print the printer settings page using the Feed/Cut button of the printer. 1 Make sure that the TZ or HG tape cassette is set and the tape compar...
Page 45 - Select the desired baud rate.; The baud rate will be changed.; Setting the printer baud rate
44 Serial interface settings (Windows ® only) Use the following steps to change or confirm the port and the baud rate settings on the computer and the printer. The following procedure is shown based on Windows Vista ® . Setting the computer baud rate 1 On the taskbar, click the “Start” button, and t...
Page 46 - Maintenance; Always disconnect the AC adapter prior to cleaning the printer.
45 Maintenance Your printer should be cleaned on a regular basis to maintain its performance. ■ Cleaning the exterior of the printer Wipe any dust and marks from the main unit using a soft, dry cloth.Use a slightly dampened cloth with water on difficult to remove marks. ■ Cleaning the print head and...
Page 47 - Troubleshooting; Problem
46 Troubleshooting For printer troubleshooting, refer to the following list of possible problems. Q & A Problem Solution The printer does not print.A printing error is received. Check that the interface cable is connected correctly, the tape cassette is installed correctly, and the tape compartm...
Page 50 - Product specifications; Printer specifications; crack and peel; Operating environment; Item
49 Product specifications ■ Printer specifications * Auto “ crack and peel ” cutter is available only when using laminated tape. * When using Fabric tapes or Non-laminated tapes, the label is not cut automatically. ■ Operating environment Item Specification Display Power lamp (green), STATUS lamp (r...
Page 51 - Appendix; General procedure for the BTP (Barcode Template Print) function; Connect the barcode reader to the printer.; Specify the cut method and the number of copies to be printed.
50 Appendix General procedure for the BTP (Barcode Template Print) function The general procedure for using the BTP (Barcode Template Print) function is described below.For details on specifying the various settings, refer to “BTP (Barcode Template Print) function” ( → P.37). 1 Use P-touch Editor 5....
Page 52 - List of barcodes for specifying settings
51 List of barcodes for specifying settings These are the barcodes for specifying settings used with the “BTP (Barcode Template Print) function” ( → P.37). Note ● When using the barcodes in this list, set “Trigger for P-touch Template Printing” and “Command Prefix Character” to default in P-touch Te...
Page 53 - • Preset template 1
52 ■ For entering numbers*2 • 1 • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 0 • 00 ■ Preset template number • Preset template 1 • Preset template 2 • Preset template 3 • Preset template 4
Page 55 - Index
54 Index A AC adapter ............................................. 10, 15AC adapter jack ........................................... 11 B Barcode printing .......................................... 39Baud rate ..................................................... 44 C CD-ROM ..........................
Page 56 - For product information and downloading the latest drivers:; Contact Information
55 Operational Assistance Assistance on the Internet For product information and downloading the latest drivers: http://solutions.brother.com/ For purchasing accessories and certain Brother products: http://www.brothermobilesolutions.com For technical and operational assistance you may call Brother ...
Page 58 - Guía del usuario
Page 59 - Introducción; Declaración de conformidad conInternational ENERGY STAR
2 Introducción Gracias por adquirir la unidad PT-9700PC/PT-9800PCN.La PT-9700PC/PT-9800PCN (de aquí en adelante, “la impresora”) es una impresora de etiquetas que permite imprimir fácilmente etiquetas personalizadas cuando se conecta a una computadora.Este manual contiene diversos procedimientos bás...
Page 61 - Garantía Limitada de Dos Años de Brother
4 Garantía Limitada de Dos Años de Brother ® (solamente para EE. UU.) Quién está cubierto: • Esta garantía limitada (“la garantía”) se concede exclusivamente al usuario final/comprador original (denominado en esta garantía “Comprador Original”) del Producto, consumibles y accesorios suministrados (d...
Page 63 - Información importante; en línea en
6 Información importante En caso de que le surja alguna pregunta o necesite información sobre el Producto de Brother, tenemos variasopciones de asistencia entre las que podrá elegir: Servicio de atención al cliente1-800-255-0415 Servicio de atención al cliente1-303-460-1628 (fax) World Wide Webwww.b...
Page 64 - Precauciones de seguridad; Los símbolos empleados en este manual son los siguientes:; ADVERTENCIA; Adaptador de CA
7 Precauciones de seguridad Para evitar lesiones personales y daños en el equipo, se facilita información importante utilizando diversos símbolos.Los símbolos y su significado son los siguientes: Los símbolos empleados en este manual son los siguientes: ADVERTENCIA Indica lo que debe hacer para evit...
Page 65 - Impresora; PRECAUCIÓN; Cortador de cinta
8 Impresora Siga estas indicaciones para evitar fuego, daños, descargas eléctricas o asfixia. No deje que la impresora se moje de forma alguna. No toque las piezas metálicas situadas cerca del cabezal de impresión. El cabezal de impresión se calienta en exceso durante su uso y permanece muy caliente...
Page 66 - Precauciones generales
9 Precauciones generales ● La impresora puede funcionar incorrectamente si se deja cerca de una televisión, radio, etc. No instale la impresora cerca de cualquier aparato que cause interferencia electromagnética. ● No utilice la impresora de forma alguna o para cualquier fin que no se describa en es...
Page 67 - Tabla de contenido; Ajuste de la interfaz en serie (solamente Windows
10 Tabla de contenido Tabla de contenido ..........................................................................................................10 Desembalaje de la impresora ..........................................................................................11 Descripción general ............
Page 68 - Desembalaje de la impresora; Se conecta al cable de alimentación.
11 Desembalaje de la impresora Abra la caja y confirme que contiene los siguientes artículos. Si alguno de estos artículos falta o está dañado, comuníquese con la tienda o establecimiento donde compró la impresora. ■ PT-9700PC/PT-9800PCN Impresora (PT-9700PC) Impresora (PT-9800PCN) ■ Adaptador de CA...
Page 69 - Descripción general; Nota
12 Descripción general ■ PT-9700PC ■ PT-9800PCN Vista frontal Vista posterior DC IN 24V 10 8 9 STATUS 1 2 3 456 7 Vista frontal Vista posterior 1. Cubierta del compartimiento de la cinta 8. Tomacorriente para el adaptador de CA 2. Salida de etiquetas 9. Puerto en serie (RS-232C) 3. Botón de apertura...
Page 70 - Lámparas LED; Lámparas LED en la impresora
13 Lámparas LED Puede determinarse cuál es el estado de la impresora por las lámparas LED en la impresora o la interfaz directa USB (solamente PT-9800PCN). ■ Lámparas LED en la impresora Estado de la lámpara Estado Solución Botón de encendido (verde) Lámpara de STATUS (ESTADO) (rojo) Encendido No en...
Page 71 - Lámparas LED en la interfaz directa USB (solamente PT-9800PCN)
14 ■ Lámparas LED en la interfaz directa USB (solamente PT-9800PCN) Encendido Parpadeando a intervalos rápidos Error en el cortador Compruebe que la cinta no está atascada en la impresora. Si es necesario, apague la impresora y vuelva a encenderla. Si la lámpara de STATUS (ESTADO) continúa parpadean...
Page 72 - Preparativos para utilizar la impresora; Conexión de la impresora
15 Preparativos para utilizar la impresora Antes de crear etiquetas con la impresora, es necesario seguir los siguientes pasos. Nota ● Los procedimientos de conexión varían dependiendo del sistema operativo instalado en la computadora, y también varían de acuerdo al tipo de conexión, ya sea conexión...
Page 73 - Encendido de la impresora
16 Conexión de la impresora Conecte la impresora a la fuente de alimentación y a una computadora. Conexión a la fuente de alimentación 1 Conecte el cable de alimentación incluido al adaptador de CA. 2 Introduzca el conector del adaptador de CA en el tomacorriente para este adaptador situado en la pa...
Page 74 - Conexión a una computadora; Sistemas operativos
17 Conexión a una computadora Conecte la impresora a una computadora mediante los cables de interfaz. Los cables de interfaz que se utilizan para la conexión a un puerto USB, puerto en serie (RS-232C) y puerto LAN (Ethernet cableada 10/100BASE-TX) son diferentes. Sistemas operativos Configuración bá...
Page 75 - Utilización de los cables de interfaz; Cable USB; Utilice el cable de interfaz incluido.
18 Utilización de los cables de interfaz Los cables en serie (RS-232C) y de red (Ethernet) no son accesorios estándar. Utilice el cable adecuado para el tipo de interfaz. ■ Cable USB Utilice el cable de interfaz incluido. ■ Cable en serie (RS-232C) (solamente Windows ® ) En la tabla siguiente se mue...
Page 76 - Instalación del casete de cinta; Cinta autorizada; Cintas TZ; Cinta laminada estándar; Cintas HG; Instale el casete de cinta.; • Si la cinta de tinta está suelta, utilice el
19 Instalación del casete de cinta En esta sección se indican los tipos de cintas que se pueden utilizar con esta impresora y se explica el procedimiento para instalar los casetes de cinta. Cinta autorizada A continuación se enumeran los tipos de cintas que se pueden utilizar con la impresora. ■ Cin...
Page 77 - Instalación del software para la impresora PT-9700PC; Si se utiliza Microsoft; Instalación estándar
20 Instalación del software para la impresora PT-9700PC El procedimiento para instalar el software varía según el sistema operativo instalado en la computadora. El procedimiento de instalación está sujeto a cambios sin previo aviso. Si usa Microsoft ® Windows ® , consulte “Si se utiliza Microsoft ® ...
Page 78 - continuará con la instalación.; Si se utiliza Mac OS; Inicie la computadora Macintosh; hasta que haya
21 5 Seleccione el modelo deseado y, después, haga clic en [Aceptar]. Siga las instrucciones en pantalla para instalar el controlador de impresora. 6 Cuando así se le indique, conecte la impresora a la computadora mediante el cable USB y, a continuación, encienda la impresora. 7 Una vez detectada la...
Page 79 - La computadora Macintosh; X y haga clic en; En Mac OS; mediante un hub USB, es
22 2 Haga doble clic en “Brother PT-9700PC Driver.pkg”, en la carpeta “Mac OS X”. El instalador del controlador se iniciará. Siga las instrucciones que se muestran en pantalla. 3 Una vez finalizada la instalación y que se muestre la pantalla siguiente, haga clic en [Cerrar]. La instalación del contr...
Page 80 - para
23 8 En Mac OS ® X 10.3.9 - 10.4.x Haga clic en [Añadir] y seleccione USB en la parte superior de la pantalla.Seleccione “PT-9700PC” en la lista y vuelva a hacer clic en [Añadir] para añadir la impresora a la “Lista de impresoras”. En Mac OS ® X 10.5.x - 10.6 Seleccione “Brother PT-9700PC” en la lis...
Page 81 - Instalación del software para la impresora PT-9800PCN
24 Instalación del software para la impresora PT-9800PCN El procedimiento para instalar el software varía según el sistema operativo instalado en la computadora. El procedimiento de instalación está sujeto a cambios sin previo aviso. Si usa Microsoft ® Windows ® , consulte “Si se utiliza Microsoft ®...
Page 82 - Office están cerradas.
25 3 Lea el contrato de licencia y haga clic en [Sí] si acepta los términos y condiciones. Siga las instrucciones que se muestran en pantalla. 4 Active la casilla de verificación correspondiente a los programas de complemento que desee instalar y haga clic en [Siguiente]. 5 A continuación, seleccion...
Page 83 - Seleccione la impresora.
26 9 Haga clic en [Finalizar]. La instalación del software se ha completado.Reinicie la computadora si así se le indica. 0 Inicie el software. Haga clic en “Iniciar” - “Todos los programas (Programas)” - “Brother P-touch” - “P-touch Editor 5.0” para iniciar P-touch Editor 5.0. ■ Para los usuarios de...
Page 86 - para añadir
29 3 Una vez finalizada la instalación y que se muestre la pantalla siguiente, haga clic en [Cerrar]. La instalación del controlador de impresora se ha completado.A continuación, instale P-touch Editor 5.0. 4 Haga doble clic en “P-touch Editor 5.0 Installer.mpkg”. El instalador de P-touch Editor 5.0...
Page 87 - Ahora ya puede utilizar la impresora.
30 8 Seleccione el método de conexión. Impresora local con cable USB Consulte “Para los usuarios de un cable de interfaz USB” ( → P.30). Impresora compartida de red (Configuración de red simple) Compruebe que el cable LAN y la impresora están conectados.Consulte “Para los usuarios de un cable de...
Page 91 - Desinstalación del software; Desinstalación de P-touch Editor
34 Desinstalación del software En esta sección se explica cómo desinstalar el software y el controlador de impresora. En los pasos siguientes verá el término PT-XXXX, donde “XXXX” es el nombre de su impresora. Si usa Microsoft ® Windows ® , consulte “Si se utiliza Microsoft ® Windows ® ” ( → P.34). ...
Page 92 - Vaya al paso
35 Si aparece el cuadro de diálogo de confirmación de la autorización, haga clic en [Continuar]. Si aparece el cuadro de diálogo “Control de cuentas de usuario”, escriba la contraseña y haga clic en [Aceptar].Aparecerá la ventana “Propiedades de Servidor de impresión”. En Windows ® 7 Seleccione [Fax...
Page 93 - X y haga doble clic en; Seleccione “PT-XXXX” y haga clic en; Seleccione “Brother PT-XXXX” y haga clic
36 ■ Desinstalación del controlador de impresora 1 Apague la impresora. 2 En Mac OS ® X 10.3.9 - 10.4.x Haga doble clic en la unidad donde está instalado Mac OS ® X y haga doble clic en “Aplicaciones” - “Utilidades” - “Utilidad Configuración Impresoras”.Aparecerá la ventana “Lista de impresoras”. En...
Page 94 - Función avanzada; Impresión de etiquetas a alta velocidad o con alta resolución; Consulte “Impresión a mayor velocidad o con mayor resolución” (; Impresión de una lista de los ajustes actuales de la impresora; Consulte “Impresión de los ajustes de la impresora” (; Impresión a mayor velocidad o con mayor resolución; Salida
37 Función avanzada Una vez conectada la impresora a la computadora, es posible crear e imprimir etiquetas.En esta sección se explica cómo crear etiquetas utilizando un lector de códigos de barras y diversos ajustes de impresión útiles. ■ Impresión de etiquetas a alta velocidad o con alta resolución...
Page 95 - Impresión distribuida; Haga clic en [Detectar imformación del
38 Impresión distribuida Si se va a imprimir un gran número de etiquetas, es posible distribuir la impresión entre varias impresoras. Dado que la impresión es simultánea, el tiempo total de impresión puede disminuir. 1 En P-touch Editor 5.0, en el menú “Archivo”, haga clic en “Imprimir”. 2 Haga clic...
Page 97 - Preparación; Lector de códigos de barras; DTR
40 Función BTP (Impresión de plantillas de códigos de barras) Con un lector de códigos de barras conectado a la impresora, es posible imprimir fácilmente etiquetas y códigos de barras escaneando estos últimos. Impresión de plantillas predefinidas ( → P.41) Si se ha almacenado un diseño de etiqueta...
Page 98 - Impresión de plantillas predefinidas; Se imprimirá la etiqueta especificada.; Especifique un número de “Asignacion
41 ■ Impresión de plantillas predefinidas Si se ha almacenado un diseño de etiqueta de uso frecuente en la impresora, es posible imprimir etiquetas idénticas con solamente escanear los códigos de barras. 1 Con Transfer Manager, transfiera (desde P-touch Editor 5.0 a la impresora) el diseño de etique...
Page 102 - Cómo instalar P-touch Editor Lite LAN; • Copie la carpeta que contiene P-touch; Cómo utilizar P-touch Editor Lite LAN; Haga clic en el botón “Imprimir”.
45 Utilización de P-touch Editor Lite LAN (solamente PT-9800PCN y Windows ® ) P-touch Editor Lite LAN es una versión básica de una herramienta de edición de etiquetas.Al copiar P-touch Editor Lite LAN, instalado desde el CD-ROM suministrado, en una carpeta compartida en el servidor, otros usuarios d...
Page 103 - Encienda la impresora.
46 Impresión de los ajustes de la impresora La página de ajustes de la impresora imprime un informe de los ajustes de la impresora y los ajustes de la red (solamente PT-9800PCN). Puede imprimir la página de ajustes de la impresora mediante el botón de Feed/Cut de la impresora. 1 Asegúrese de que ha ...
Page 104 - Windows; Se cambiará la velocidad en baudios.
47 Ajuste de la interfaz en serie (solamente Windows ® ) Siga los pasos que se indican a continuación para cambiar o confirmar los ajustes del puerto y la velocidad en baudios de la computadora y de la impresora. El procedimiento siguiente se basa en Windows Vista ® . Ajuste de la velocidad en baudi...
Page 105 - Mantenimiento; Limpieza del exterior de la impresora
48 Mantenimiento La impresora ha de limpiarse con frecuencia para mantener su rendimiento. ■ Limpieza del exterior de la impresora Quite el polvo y las marcas de la unidad principal con un paño suave y seco.Utilice un paño ligeramente humedecido con agua en aquellas marcas que sean difíciles de quit...
Page 106 - Limpieza del cortador de cinta
49 ■ Limpieza del cortador de cinta Aproximadamente una vez al año limpie las cuchillas del cortador con un bastoncillo de algodón humedecido con alcohol isopropílico.El adhesivo de la cinta puede acumularse en la cuchilla del cortador tras el uso continuado dejando fuera el borde de la cuchilla, lo...
Page 107 - Solución de problemas; P y R; Problema
50 Solución de problemas Para solucionar los problemas de la impresora, consulte la lista siguiente de posibles problemas. P y R Problema Solución La impresora no imprime.Se recibe un error de impresión. Compruebe que el cable de interfaz está conectado correctamente, que el casete de cinta está ins...
Page 110 - Especificaciones del producto; Especificaciones de la impresora; Elemento
53 Especificaciones del producto ■ Especificaciones de la impresora * El cortador automático medio únicamente está disponible cuando se utiliza cinta laminada.* Si se utilizan cintas de tela o cintas no laminadas, la etiqueta no se corta automáticamente. Elemento Especificación Pantalla Lámpara de e...
Page 111 - Entorno de funcionamiento
54 ■ Entorno de funcionamiento Elemento Especificación Sistema operativo Windows ® Windows ® XP/Windows Vista ® /Windows ® 7, Windows Server ® 2003/Windows Server ® 2008/2008 R2 (sólo para PT-9800PCN) Macintosh ® Mac OS ® X 10.3.9 - 10.6 Interfaz estándar Windows ® RS-232C, puerto USB (protocolo USB...
Page 112 - Apéndice; Conecte el lector de códigos de barras a la impresora.; Permite especificar los ajustes o borrar los ajustes anteriores.; Escanee el código de barras “Ajustes básicos” (Basic settings).; Especifique el método de corte y el número de copias a imprimir.
55 Apéndice Procedimiento general para la función BTP (Impresión de plantillas de códigos de barras) A continuación se describe el procedimiento general para utilizar la función BTP (Impresión de plantillas de códigos de barras).Si desea más información sobre cómo especificar los diversos ajustes, c...
Page 113 - Lista de códigos de barras para especificar ajustes; • Corte automático desactivado (Auto cut off)
56 Lista de códigos de barras para especificar ajustes Estos son los códigos de barras para especificar ajustes utilizados con “Función BTP (Impresión de plantillas de códigos de barras)” ( → P.40). Nota ● Al utilizar los códigos de barras de esta lista, ajuste “Activación para impresión de plantill...
Page 114 - Número de plantilla predefinida (Preset template number); • Plantilla predefinida 1 (Preset template 1)
57 ■ Para introducir números (For entering numbers)*2 • 1 • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 0 • 00 ■ Número de plantilla predefinida (Preset template number) • Plantilla predefinida 1 (Preset template 1) • Plantilla predefinida 2 (Preset template 2) • Plantilla predefinida 3 (Preset template 3) • Pl...
Page 117 - Para adquirir accesorios y determinados productos Brother:; Información de contacto
60 Asistencia operativa Asistencia por Internet Para obtener información sobre productos y descargar los controladores más recientes: http://solutions.brother.com/ Para adquirir accesorios y determinados productos Brother: http://www.brothermobilesolutions.com Si necesita asistencia técnica y operat...
Page 118 - Printed in China