Brother dcp135c User Manual - Free PDF Download

Page 2 - Symbols used in this guide

1 Symbols used in this guide Warning Caution Improper Setup Warnings tell you what to do to prevent possible personal injury. Cautions specify procedures you must follow or avoid to prevent possible damage to the machine or other objects. Improper Setup icons alert you to devices and operations that...

Page 3 - Table of Contents; Getting Started; STEP 1 –; Setting Up the Machine; STEP 2 –; Installing the Driver & Software; Windows; Installing FaceFilter Studio Help

Table of Contents 1 Getting Started Carton components ...................................................................................................................................... 2Control panel ...................................................................................................

Page 4 - Carton components

Getting Started 2 1 1 Carton components Carton components may vary from one country to another.Save all packing materials and the carton in case for any reason you must ship your machine. A USB interface cable is not a standard accessory. Please make sure you use a USB 2.0 cable that is no longer ...

Page 5 - Control panel; Note

Getting Started 3 2 Control panel 1 Copy keys 2 Menu keys 3 Stop/Exit key 4 Start keys 5 On/Off key 6 Ink Management key 7 Scan key 8 PhotoCapture key 9 LCD (Liquid Crystal Display) 10 Warning LED For the details of the control panel, see Control panel overview in Chapter 1 of the User’s Guide. Note...

Page 6 - Removing the protective; Improper Setup; Loading paper

Setting Up the Machine 4 STEP 1 1 1 Removing the protective parts 1 Remove the protective tape and film covering the scanner glass. 2 Remove the foam bag containing the ink cartridges from on top of the paper tray. Improper Setup DO NOT connect the interface cable. Connecting the interface cable is ...

Page 8 - Connecting the power cord; Choosing your language; Select Language; English

Setting Up the Machine 6 STEP 1 8 While holding the paper tray in place, pull out the paper support until it clicks, and then unfold the paper support flap . Note Do not use the paper support flap for Legal size paper. 3 Connecting the power cord 1 Connect the power cord. Improper Setup DO NOT conne...

Page 9 - Installing the ink cartridges

Setting Up the Machine 7 5 Installing the ink cartridges Warning If ink gets in your eyes, wash them out with water at once, and if irritation occurs consult a doctor. 1 Make sure that the power is turned on.The LCD shows: No Cartridge 2 Open the ink cartridge cover (1). 3 Pull all the lock release ...

Page 10 - Preparing System

Setting Up the Machine 8 STEP 1 6 Install each ink cartridge in the direction of the arrow on the label.Take care to match the colour of the lock release lever (1) with the cartridge colour (2), as shown in the diagram below. 7 Lift each lock release lever and gently push it until it clicks, and the...

Page 11 - Print quality check

Setting Up the Machine 9 6 Print quality check 1 After the cleaning cycle is finished, the LCD shows: Set Paper and q Press Start 2 Make sure A4, Letter or Legal size paper is loaded in the paper tray.Press Colour Start . The machine starts printing the Print Quality Check Sheet (only during initial...

Page 12 - Setting the LCD contrast; Setting the date and time

Setting Up the Machine 10 STEP 1 7 Setting the LCD contrast You can adjust the LCD contrast for a sharper and more vivid display. If you are having difficulty seeing the LCD from your position, we recommend the following contrast setting for improved viewing. 1 Press Menu . 2 Press a or b to choose ...

Page 13 - Now go to

Setting Up the Machine 11 9 Press Stop/Exit . Note If you make a mistake and want to start again, press Stop/Exit to go back to step 1 . To confirm the current date and time, print out the User Settings report. (See Printing Reports in Chapter 1 of the User's Guide.) Now go to Supplied CD-ROM ‘MFL-P...

Page 14 - Macintosh

Supplied CD-ROM ‘MFL-Pro Suite’ 12 1 1 Supplied CD-ROM ‘MFL-Pro Suite’ Windows ® Install MFL-Pro Suite You can install the MFL-Pro Suite software and multifunction drivers. Install Other Drivers or Utilities You can install additional MFL-Pro Suite software utilities, install without ScanSoft™ Paper...

Page 15 - For USB Interface Users

Windows ® Macintosh ® Installing the Driver & Software 13 STEP 2 Follow the instructions on this page for your operating system and interface.For the latest drivers, documentation, and to find the best solution for your problem, access the Brother Solution Centerdirectly from the CD-ROM / Driver...

Page 16 - Important

Installing the Driver & Software 14 STEP 2 W in dow s ® US B Windows ® 1 1 For USB Interface Users (For Windows ® 2000 Professional/XP/ XP Professional x64 Edition/Windows Vista™) Important Make sure that you have finished the instructions from STEP 1 Setting Up the Machine on pages 4 through 11...

Page 19 - Installing FaceFilter Studio

Installing the Driver & Software 17 W in dow s ® US B Windows ® Installing FaceFilter Studio FaceFilter Studio is an easy-to-use borderless photo printing application. FaceFilter Studio also lets you edit your photo data and add photo effects such as red eye reduction or skin tone enhancement. I...

Page 24 - Consumables; Replacement consumables; Ink cartridge

Consumables 22 1 1 Replacement consumables When the time comes to replace ink cartridges, an error message will be indicated on the LCD. For more information about the ink cartridges for your machine, visit http://solutions.brother.com or contact your local Brother re-seller. Ink cartridge Black Yel...